This Standard specifies requirements for the design and installation of emergency escape lighting and illuminated emergency exit signage systems for buildings. Both central battery and single point or self contained systems are included.The scope of this Standard does not include the following:Constructional (including appearance) requirements for emergency escape luminaires and exit signs. These requirements can be found in AS2293.3.Requirements for maintaining an emergency escape lighting installation once installed. These requirements can be found in AS/NZS2293.2.Specification of the types of buildings or particular spaces that are required to be provided with emergency escape lighting. This is typically set out in the Building Code of Australia (BCA).Requirements for emergency evacuation lighting of the interior of lift cars. These requirements can be found in AS1735.Requirements for high-risk task area lighting.Requirements for standby lighting. Due to the known detrimental effect of smoke on the visual conditions provided by emergency lighting, it is recommended that provision be made to keep escape paths as free from smoke as possible by means such as construction techniques and ventilation.

First published in Australia as part of AS 2293.1-1979.Second edition 1983.Third edition 1987.First published in New Zealand as part of NZS 6742:1971.AS 2293.1-1987 and NZS 6742:1971 jointly revised and designated in part as AS/NZS 2293.1:1995.Revised, de-jointed and re-designated as AS2293.1-2005.Second edition 1998. First published in Australia as part of AS 2293.1-1979. Second edition 1983. Third edition 1987. First published in New Zealand as part of NZS 6742:1971. AS 2293.1-1987 and NZS 6742:1971 jointly revised and designated in part as AS/NZS 2293.1:1995. Second edition 1998. Revised, de-jointed and re-designated as AS 2293.1-2005.