Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 4024.1502-2006

Current
Current

The latest, up-to-date edition.

Safety of machinery Design of safety related parts of control systems - Validation (Reconfirmed 2014)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

29-06-2006

Preview

Specifies the conditions and procedures to be followed for the validation by both analysis and testing of safety functions provided and category achieved by the safety related parts of control systems using the design rationale provided by the designer. When validating programmable electronic systems, This Standard does not provide complete requirements and can require the use of other Standards such as the AS61508 series.

This Standard specifies the procedures and conditions to be followed for the validation by both analysis and testing of the safety functions provided, and the category achieved for the safety related parts of the control system in compliance with AS 4024.1501, using the design rationale provided by the designer.This Standard does not give complete validation requirements for programmable electronic systems and therefore can require the use of other standards.Requirements for programmable electronic systems, including embedded software, are given in the AS 61508 series.

Committee
SF-041
DocumentType
Standard
ISBN
0 7337 7484 9
Pages
48
ProductNote
Reconfirmed 15/08/2014.This standard has been reconfirmed in Australia in 2014 and remains current in New Zealand. Reconfirmation Notice 15/08/2014
PublisherName
Standards Australia
Status
Current
Supersedes

Originated as part of AS 4024.1(Int)-1992.Previous edition part of AS 4024.1-1996.Revised in part and redesignated as AS 4024.1502-2006.Reconfirmed 2014. Originated as part of AS 4024.1(Int)-1992. Previous edition part of AS 4024.1-1996. Revised in part and redesignated as AS 4024.1502-2006.

AS 60947.4.1-2004 Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters
AS 4024.1202-2006 Safety of machinery General principles - Technical principles
AS 4024.1201-2006 Safety of machinery - General principles - Basic terminology and methodology
AS 60204.1-2005 Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD)
AS 61508.7-2001 Functional safety of electrical/electronic/programmable electronic safety-related systems - Overview of techniques and measures
AS 60947.6.2-2004 Low-voltage switchgear and controlgear Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
AS 4024.1602-2006 Safety of machinery Interlocking devices associated with guards - Principles for design and selection
AS 61508.1-1999 Functional safety of electrical/electronic/programmable electronic safety-related systems - General requirements
AS 1447-1991 Hot-rolled spring steels
AS 61508.3-1999 Functional safety of electrical/electronic/programmable electronic safety-related systems - Software requirements
AS 61508.5-1999 Functional safety of electrical/electronic/programmable electronic safety-related systems - Examples of methods for the determination of safety integrity levels
AS 61508.4-1999 Functional safety of electrical/electronic/programmable electronic safety-related systems - Definition and abbreviations
AS 61508.2-2001 Functional safety of electrical/electronic/programmable electronic safety-related systems - Requirements for electrical/electronic/programmable electronic safety-related systems
AS 4024.1301-2006 Safety of machinery Risk assessment - Principles of risk assessment
AS 60269.1-2005 Low-voltage fuses - General requirements
AS 4024.1603-2006 Safety of machinery Design of controls, interlocks and guards - Prevention of unexpected start-up (Reconfirmed 2014)
AS 60529-2004 Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018)
AS 4024.1501-2006 Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014)
AS 4024.1604-2006 Safety of machinery Design of controls, interlocks and guarding - Emergency stop - Principles for design
AS 61508.6-2001 Functional safety of electrical/electronic/programmable electronic safety-related systems - Guidelines on the application of AS 61508.2 and AS 61508.3
AS 60947.5.1-2004 Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices
AS 60947.2-2005 Low-voltage switchgear and controlgear - Circuit-breakers

AS 4024.1501-2006 Safety of machinery Design of safety related parts of control systems - General principles for design (Reconfirmed 2014)
AS/NZS 4240.2:2009 Remote control systems for mining equipment Operation and maintenance for underground metalliferous mining (Reconfirmed 2021)
AS/NZS 4836:2011 Safe working on or near low-voltage electrical installations and equipment
AS/NZS 4024.1:2006 Series Safety of machinery Safety of machinery series
AS/NZS 4240.3:2013 Remote control systems for mining equipment Operation and maintenance for underground coal mining
AS 1210-2010 Pressure vessels (Reconfirmed 2021)
AS 4024.3002-2009 Safety of machinery Materials forming and shearing - Hydraulic power presses
AS 4024.2601-2008 Safety of machinery Design of controls, interlocks and guarding - Two-hand control devices - Functional aspects and design principles
AS 4024.3001-2009 Safety of machinery Materials forming and shearing - Mechanical power presses
AS 2941-2008 Fixed fire protection installations - Pumpset systems
AS 1418.8-2008 Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018)
AS 4606-2012 Grade S fire resistant and antistatic requirements for conveyor belting and conveyor accessories (Reconfirmed 2024)
AS/NZS 4871.6:2007 Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment
AS 4431:2019 Safe working on new lift installations in new constructions
AS/NZS 1826:2008 Electrical equipment for explosive gas atmospheres - Special protection - Type of protection ‘s’
AS/NZS 3584.3:2012 Diesel engine systems for underground coal mines Maintenance
AS/NZS 3007:2013 Electrical equipment in mines and quarries - Surface installations and associated processing plant
AS 4233.2:2013 High pressure water jetting systems Construction and performance
AS 3533.4.4:2018 Amusement rides and devices Specific requirements - Hire go-karts

View more information
$219.67
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more