AS/NZS 3010:2017
Current
Current
The latest, up-to-date edition.
Electrical installations - Generating sets
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
08-05-2017
Publisher
AS NZS 3010 2017 specifies requirements for minimum safety requirements related to the use of generating sets for the supply of electricity at voltages normally exceeding 50 V a.c. or 120 V d.c.
This Standard sets out the minimum safety requirements related to the use of generating sets for the supply of electricity at low voltage, that is, not exceeding 1000 V a.c or 1500 V d.c.The Standard applies to electricity generating sets that are driven by internal combustion engines, and forms any of the following:(a) Normal supply source for electrical installations.(b) Alternative supply source for electrical installations.(c) Electrical supply source for the connection of electrical appliances and portable tools.(d) Supply sources that operate in parallel with the normal supply in the electrical installation.This Standard does not—(i) apply to uninterruptible power supplies; or(ii) apply to other renewable energy generation systems, such as, the following:(A) Inverters.(B) Photovoltaic arrays.(C) Water or wind driven turbines.NOTE: While intended to be applied to low voltage generating sets driven by internal combustion engines, the electrical principles could be applied to other types of energy sources.
| Committee |
EL-001
|
| DevelopmentNote |
New PDF incorporating Amendment 1.
|
| DocumentType |
Standard
|
| ISBN |
978 1 76035 745 0
|
| Pages |
84
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes | |
| UnderRevision |
First published as AS 3010.1—1987.Revised and redesignated AS/NZS 3010:2005.Second edition 2017. First published as AS 3010.1-1987. Revised and redesignated AS/NZS 3010:2005. Second edition 2017. Reissued incorporating Amendment No. 1 (April 2020).
| AS/NZS 4777.1:2016 | Grid connection of energy systems via inverters Installation requirements |
| AS/NZS IEC 60947.5.2:2015 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Proximity switches |
| AS/NZS 3947.6.1:2001 | Low-voltage switchgear and controlgear Multiple Function equipment - Automatic transfer switching equipment |
| AS/NZS 60079.33:2012 | Explosive atmospheres Equipment protection by special protection 's' |
| AS/NZS 1768:2007 | Lightning protection |
| AS/NZS 3584.1:2008 | Diesel engine systems for underground coal mines Fire protected - Heavy duty |
| AS 60034.1-2009 | Rotating electrical machines Rating and performance |
| AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
| AS/NZS IEC 60947.7.2:2015 | Low-voltage switchgear and controlgear Ancillary equipment - Protective conductor terminal blocks for copper conductors |
| AS/NZS IEC 60947.6.1:2015 | Low-voltage switchgear and controlgear Multiple function equipment - Transfer switching equipment |
| AS/NZS 4024.1601:2014 | Safety of machinery Design of controls, interlocks and guarding - Guards - General requirements for the design and construction of fixed and movable guards |
| AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
| AS/NZS 3820:2009 | Essential safety requirements for electrical equipment |
| AS/NZS 60079.27:2008 | Explosive atmospheres Fieldbus intrinsically safe concept (FISCO) |
| AS/NZS IEC 60947.5.7:2015 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Requirements for proximity devices with analogue output |
| AS/NZS IEC 60947.5.9:2015 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Flow rate switches |
| AS/NZS 60079.35.2:2012 | Explosive atmospheres Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters |
| AS/NZS 61439.1:2016 | Low-voltage switchgear and controlgear assemblies General rules (IEC 61439-1, Ed. 2.0 (2011), MOD) |
| AS/NZS IEC 60947.2:2015 | Low-voltage switchgear and controlgear Circuit-breakers |
| AS/NZS 60079.29.4:2011 | Explosive atmospheres Gas detectors - Performance requirements of open path detectors for flammable gases (Reconfirmed 2022) |
| AS/NZS 60079.29.1:2008 | Explosive atmospheres Gas detectors - Performance requirements of detectors for flammable gases |
| AS/NZS CISPR 14.1:2013 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Emission |
| AS/NZS IEC 60947.7.3:2015 | Low-voltage switchgear and controlgear Ancillary equipment - Safety requirements for fuse terminal blocks |
| AS/NZS 60079.30.1:2016 | Explosive atmospheres Electrical resistance trace heating - General and testing requirements |
| AS/NZS 60079.26:2015 | Explosive atmospheres Equipment with Equipment Protection Level (EPL) Ga |
| AS/NZS 60079.5:2015 | Explosive atmospheres Equipment protection by powder filling ’q’ |
| AS/NZS 61439.6:2016 | Low-voltage switchgear and controlgear assemblies Busbar trunking systems (busways) (IEC 61439-6, Ed. 1.0 (2012), MOD) |
| AS/NZS IEC 60947.5.5:2015 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function |
| AS/NZS 3009:1998 | Electrical installations - Emergency power supplies in hospitals |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS/NZS 60079.30.2:2016 | Explosive atmospheres Electrical resistance trace heating - Application guide for design, installation and maintenance |
| AS/NZS 60269.3.1:2002 | Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses |
| AS/NZS IEC 60947.5.8:2015 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Three-position enabling switches |
| AS/NZS 3123:2005 | Approval and test specification - Plugs, socket-outlets and couplers for general industrial application (Reconfirmed 2016) |
| AS/NZS 60079.20.1:2012 | Explosive atmospheres Material characteristics for gas and vapour classification - Test methods and data |
| AS/NZS IEC 60947.5.6:2015 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR) |
| AS/NZS IEC 60947.8:2015 | Low-voltage switchgear and controlgear Control units for built-in thermal protection (PTC) for rotating electrical machines |
| AS/NZS 61439.4:2016 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS) (IEC 61439-4, Ed. 1.0 (2012), MOD) |
| AS/NZS 60079.18:2016 | Explosive atmospheres Equipment protection by encapsulation ‘m’ |
| AS/NZS 61439.2:2016 | Low-voltage switchgear and controlgear assemblies Power switchgear and controlgear assemblies (IEC 61439-2, Ed. 2.0 (2011), MOD) |
| AS/NZS 3190:2016 | Approval and test specification - Residual current devices (current operated earth-leakage devices) |
| AS 62040.2-2008 | Uninterruptible power systems (UPS) - Electromagnetic compatibility (EMC) requirements |
| AS/NZS 61008.1:2015 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 3.2 (2013) MOD) |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
| AS/NZS 60898.1:2004 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD) |
| AS/NZS 5033:2014 | Installation and safety requirements for photovoltaic (PV) arrays |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 4509.1:2009 | Stand-alone power systems Safety and installation (Reconfirmed 2017) |
| AS/NZS IEC 60947.7.4:2015 | Low-voltage switchgear and controlgear Ancillary equipment - PCB terminal blocks for copper conductors |
| AS 4594.1-1999 | Internal combustion engines - Performance Standard reference conditions, declarations of power, fuel and lubricating oil consumptions, and test methods |
| AS/NZS 61439.3:2016 | Low-voltage switchgear and controlgear assemblies Distribution boards intended to be operated by ordinary persons (DBO) |
| AS/NZS IEC 61439.5:2016 | Low-voltage switchgear and controlgear assemblies Assemblies for power distribution in public networks |
| AS/NZS IEC 60947.4.3:2015 | Low-voltage switchgear and controlgear Contactors and motorstarters - AC semiconductor controllers and contactors for non-motor loads |
| AS 1019-2000 | Internal combustion engines - Spark emission control devices |
| AS/NZS 60269.2.1:2001 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to V: Examples of types of standardized fuses |
| AS/NZS 61009.1:2015 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 3.2 (2013) MOD) |
| AS 2676.1-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Vented cells |
| AS/NZS 60269.3.0:2000 | Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) |
| AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
| AS/NZS IEC 60947.7.1:2015 | Low-voltage switchgear and controlgear Ancillary equipment - Terminal blocks for copper conductors |
| AS/NZS 3100:2017 | Approval and test specification - General requirements for electrical equipment |
| AS/NZS IEC 60947.3:2015 | Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units |
| AS/NZS IEC 60947.4.1:2015 | Low-voltage switchgear and controlgear Contactors and motor starters - Electromechanical contactors and motor-starters |
| AS 1668.2-2012 | The use of ventilation and airconditioning in buildings Mechanical ventilation in buildings |
| AS 2221.1-1979 | Methods for measurement of airborne sound emitted by compressor units including primemovers and by pneumatic tools and machines Engineering method for measurement of airborne sound emitted by compressor/primemover units intended for outdoor use |
| AS/NZS 60079.31:2014 | Explosive atmospheres Equipment dust ignition protection by enclosure "t" |
| AS/NZS CISPR 12:2013 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers (Reconfirmed 2020) |
| AS/NZS IEC 60947.6.2:2015 | Low-voltage switchgear and controlgear Multiple function equipment - Control and protective switching devices (or equipment) (CPS) |
| AS/NZS 60079.29.3:2016 | Explosive atmospheres Gas detectors - Guidance on functional safety of fixed gas detection systems |
| AS/NZS IEC 60947.4.2:2015 | Low-voltage switchgear and controlgear Contactors and motor-starters - AC semiconductor motor controllers and starters |
| AS/NZS 60079.11:2011 | Explosive atmospheres Equipment protection by intrinsic safety ‘i’ (Reconfirmed 2022) |
| AS/NZS 60269.1:2000 | Low-voltage fuses General requirements |
| AS/NZS IEC 60947.5.1:2015 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
| AS/NZS 60079.15:2011 | Explosive atmospheres Equipment protection by type of protection 'n' |
| AS/NZS 4777.2:2015 | Grid connection of energy systems via inverters Inverter requirements |
| AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
| AS/NZS 60079.29.2:2016 | Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| AS/NZS 60079.35.1:2011 | Explosive atmospheres Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion (Reconfirmed 2022) |
| AS 1940-2004 | The storage and handling of flammable and combustible liquids |
| AS/NZS 60269.2.0:2000 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) |
| AS 4594.4-1999 | Internal combustion engines - Performance Engines for land, rail-traction and marine use - Speed governing |
| AS/NZS 3439.5:2009 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
| AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
| AS 4594.5-1999 | Internal combustion engines - Performance Engine for land, rail-traction and marine use - Torsional vibrations |
| AS/NZS 4509.2:2010 | Stand-alone power systems System design (Reconfirmed 2017) |
| AS/NZS 60079.10.2:2016 | Explosive atmospheres Classification of areas - Explosive dust atmospheres |
| AS 62040.1.2-2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations |
| AS 2676.2-1992 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Sealed cells |
| AS/NZS 3133:2013 | Approval and test specification - Air-break switches |
| AS/NZS 60269.4.0:2000 | Low-voltage fuses Supplementary requirements for fuse-links for the protection of semiconductor devices |
| AS/NZS IEC 60947.5.4:2015 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests |
| AS/NZS 3439.2:2002 | Low-voltage switchgear and controlgear assemblies Particular requirements for busbar trunking systems (busways) |
| AS/NZS 60079.6:2015 | Explosive atmospheres Equipment protection by oil immersion 'o' |
| AS/NZS 60079.25:2011 | Explosive atmospheres Intrinsically safe electrical systems |
| AS/NZS 60079.1:2015 | Explosive atmospheres Equipment protection by flameproof enclosures ‘d’ |
| AS 62040.1.1-2003 | Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas |
| AS/NZS 3439.4:2009 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS) |
| AS/NZS 60079.28:2016 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
| AS/NZS IEC 60947.5.3:2015 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| AS/NZS 3120:2011 | Approval and test specification - Cord extension sockets |
| AS/NZS 3112:2011 | Approval and test specification - Plugs and socket-outlets |
| AS/NZS 60079.0:2012 | Explosive atmospheres Equipment - General requirements |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS/NZS 60079.7:2016 | Explosive atmospheres Equipment protection by increased safety “e” |
| AS/NZS IEC 60947.1:2015 | Low-voltage switchgear and controlgear General rules |
| AS/NZS 60079.2:2015 | Explosive atmospheres Equipment protection by pressurized enclosure “p” |
| AS/NZS 3439.3:2002 | Low-voltage switchgear and controlgear assemblies Particular requirements for low voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards (IEC 60439-3:1990 MOD) |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
$249.99
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.