AS/NZS 3500.2:2003
AvailableSuperseded
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Plumbing and drainage Sanitary plumbing and drainage
Available format(s)
Hardcopy , Hardcopy with incorporated amendment , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
15-12-2003
Publisher
This Standard specifies the requirements for the design and installation of sanitary plumbing and drainage from the fixtures to a sewer, common effluent system or an on-site wastewater management system, as appropriate.
This Standard specifies the requirements for the design and installation of sanitary plumbing and drainage from the fixtures to a sewer, common effluent system or an on-site wastewater management system, as appropriate. The Standard applies to new installations as well as alterations, additions or repairs to existing installations. Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice. NOTE: The pre-treatment of trade wastes is not specified in this Standard.
| Committee |
WS-014
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5496 1
|
| Pages |
184
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
First published as AS 3500.2-1990.Jointly revised and redesignated AS/NZS 3500.2.2:1996.AS/NZS 3500.2.2:1996 jointly revised and redesignated as AS/NZS 3500.2:2003. Originated as AS 3500.2-1990. Previous edition AS/NZS 3500.2.2:1996. AS/NZS 3500.2.2:1996 jointly revised and redesignated as AS/NZS 3500.2:2003. Reissued incorporating Amendment No. 1 (November 2005). Reissued incorporating Amendment No. 2 (August 2006). Reissued incorporating Amendment No. 3 (December 2010). Reissued incorporating Amendment No. 4 (December 2011).
| AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS/NZS 1167.2:1999 | Welding and brazing - Filler metals Filler metal for welding |
| AS 1379-1997 | Specification and supply of concrete |
| AS 1428.3-1992 | Design for access and mobility Requirements for children and adolescents with physical disabilities |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS/NZS 4671:2001 | Steel reinforcing materials |
| AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
| AS/NZS 1546.1:1998 | On-site domestic wastewater treatment units - Septic tanks |
| AS 1428.2-1992 | Design for access and mobility Enhanced and additional requirements - Buildings and facilities (Reconfirmed 2015) |
| AS 2033-1980 | Installation of polyethylene pipe systems |
| AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
| AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
| AS 1631-1994 | Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
| AS 1428.4-1992 | Design for access and mobility Tactile ground surface indicators for the orientation of people with vision impairment |
| AS 3517-1995 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
| AS/NZS 4401(INT):1999 | High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings - Specifications |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
| AS 4087-2004 | Metallic flanges for waterworks purposes |
| AS 1604.1-2000 | Specification for preservative treatment - Sawn and round timber |
| AS 3600-2001 | Concrete structures |
| AS 1604.1-2005 | Specification for preservative treatment - Sawn and round timber |
| AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
| AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 3879:1995 | Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings |
| AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS 3501-1987 | Parallel screw threads of whitworth form (BSW and BSF) and associated gauges and gauging practice (Reconfirmed 2017) |
| AS/NZS 2878:2000 | Timber - Classification into strength groups |
| AS 1566-1997 | Copper and copper alloys - Rolled flat products (Reconfirmed 2018) |
| AS/NZS 2648.1:1995 | Underground marking tape Non-detectable tape (Reconfirmed 2020) |
| AS 1478.1-2000 | Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
| AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS 2032-1977 | Code of practice for installation of UPVC pipe systems |
| AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS 3706.0-2003 | Geotextiles - Methods of test General introduction and list of methods (Reconfirmed 2018) (Reconfirmed 2023) |
| AS 4087-1996 | Metallic flanges for waterworks purposes |
| AS/NZS 3500.5:2000 | National Plumbing and Drainage - Domestic installations |
| AS 1741-1991 | Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018) |
| AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
| AS 3795-1996 | Copper alloy tubes for plumbing and drainage applications |
| AS/NZS 4936:2002 | Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems (Reconfirmed 2020) |
| AS/NZS 4999(INT):2003 | PVC-U maintenance shafts |
| AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
| AS 1428.1-2001 | Design for access and mobility General requirements for access - New building work |
| AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
| AS/NZS 3879:2006 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings |
| AS 3517-2007 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
| AS 4139-2003 | Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
| AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
| AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
| AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
| ATS 5200.469-2005 | Technical Specification for plumbing and drainage products Waterless or limited flush urinals - With an integral sealing device |
| AS 4553-2008 | Gas space heating appliances |
| AS/NZS 1547:2012 | On-site domestic wastewater management |
| AS 2870-1996 | Residential slabs and footings - Construction |
| ATS 5200.047-2005 | Technical Specification for plumbing and drainage products Self-sealing devices |
| ATS 5200.499-2008 | Technical Specification for plumbing and drainage products Inline sewer dosing unit (SDU) |
| AS/NZS 2982:2010 | Laboratory design and construction |
| ATS 5200.051-2005 | Technical Specification for plumbing and drainage products Bidet douche seats |
| AS/NZS 1546.3:2008 | On-site domestic wastewater treatment units Aerated wastewater treatment systems |
| AS/NZS 1546.1:2008 | On-site domestic wastewater treatment units Septic tanks |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 5200.037.2-2008 | Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016) |
| ATS 5200.040-2005 | Waste pipe connection outlets and gratings, separate or integral |
| AS 4125.1-2009 | Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management |
| ATS 5200.020-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply |
| ATS 5200.050-2005 | Technical Specification for plumbing and drainage products Prefabricated bathroom modules |
| ATS 5200.104-2005 | Appliances (miscellaneous) |
| AS 5830.1-2012 | In-line ball valves for use in plumbing water supply systems Metal-bodied |
| ATS 5200.055-2008 | Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications |
| AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
| ATS 5200.028-2004 | Technical Specification for plumbing and drainage products - Commercial food waste disposal unit |
| AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
| ATS 5200.471-2005 | Technical specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications - Alternative systems |
| ATS 5200.425-2009 | Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system |
| AS/NZS 4765:2007 | Modified PVC (PVC-M) pipes for pressure applications |
| AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
| HB 230-2008 | Rainwater Tank Design and Installation Handbook |
| ATS 5200.037.2-2005 | Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems |
| AS 1172.1:2014 | Sanitary plumbing products Water closet pans |
| ATS 5200.420-2005 | Technical Specification for plumbing and drainage products Trap-priming valves |
| ATS 5200.501-2011 | Technical Specification for plumbing and drainage products Anti-infiltration overflow-relief device |
| ATS 5200.459-2004 | |
| ATS 5200.501-2009 | Technical Specification for plumbing and drainage products Anti-infiltration overflow relief point |
| AS 4176.2-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022) |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| HB 326-2008 | Urban Greywater Installation Handbook for Single Households |
| ATS 5200.101-2005 | Appliances (low hazard rating) |
| ATS 5200.021-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply |
| ATS 5200.482-2006 | Technical Specification for plumbing and drainage products Soil waste dump fitting |
| HB 230-2006 | Rainwater Tank Design and Installation Handbook |
| AS/NZS 2243.3:2010 | Safety in laboratories Microbiological safety and containment |
| AS/NZS 3982:1996 | Urinals |
| ATS 5200.460-2004 | Technical Specification for plumbing and drainage products Grey water diversion valve assembly |
| AS/NZS 1546.2:2008 | On-site domestic wastewater treatment units Waterless composting toilets |
| AS/NZS 5065:2005 | Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017) |
| AS 4995-2009 | Greywater treatment systems for vessels operated on inland waters |
| ATS 5200.006-2005 | Technical Specification for plumbing and drainage products Reflux valves - Sewerage |
| AS/NZS 3666.1:2011 | Air-handling and water systems of buildings - Microbial control Design, installation and commissioning |
| AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
$135.16
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
Hardcopy with incorporated amendment - English
PDF 1 User - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.