AS/NZS 3500.4:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
15-11-2023
English
14-12-2015
Sets out requirements for the design, installation and commissioning of heated water services using drinking water, rainwater or a combination thereof. It applies to new installations as well as alterations, additions and repairs to existing installations.
Committee |
WS-014
|
DocumentType |
Standard
|
ISBN |
978 1 76035 358 2
|
Pages |
116
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
First published as AS CA51—1968.Revised and redesignated as AS 1529—1974.AS 2002 first published 1979.Third edition 1987.AS 1529—1974 and AS 2002—1987 revised, amalgamated and redesignated AS 3500.4—1990.Second edition 1994.AS 3500.4—1990 jointly revised and redesignated AS/NZS 3500.4.2:1997.AS/NZS 3500.4.2:1997 jointly revised and redesignated as AS/NZS 3500.4:2003.Second edition 2015. First published as AS CA51-1968. Revised and redesignated as AS1529-1974. AS2002 first published 1979. Third edition 1987. AS1529-1974 and AS2002-1987 revised, amalgamated and redesignated AS3500.4-1990. Second edition 1994. AS3500.4-1990 jointly revised and redesignated AS/NZS3500.4.2:1997. AS/NZS3500.4.2:1997 jointly revised and redesignated as AS/NZS3500.4:2003. Second edition 2015. Reissued incorporating Amendment No. 1 (September 2017).
AS 4176.5-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Fitness for purpose of the system (ISO 21003-5:2008, MOD) (Reconfirmed 2022) |
AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
AS/NZS 2712:2007 | Solar and heat pump water heaters - Design and construction (Reconfirmed 2020) |
AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
AS/NZS 2544:1995 | Grey iron pressure fittings |
AS 10745-1998 | Information technology - Open Systems Interconnection - Upper layers security model |
AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
AS/NZS 2280:2014 | Ductile iron pipes and fittings |
AS/NZS 2492:2007 | Cross-linked polyethylene (PE-X) pipes for pressure applications |
AS 4176.1-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - General (ISO 21003-1:2008, MOD) (Reconfirmed 2022) |
AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
AS 5200.053-2008 | Plumbing and drainage products Stainless steel pipes and tubes for pressure applications |
AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
AS 5082.1-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications |
AS/NZS 2537.2:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings (ISO 15875-3:2003, MOD) (Reconfirmed 2022) |
AS/NZS 2537.1:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General (ISO 15875-1:2003, MOD) (Reconfirmed 2022) |
AS 1528.1-2001 | Tubes (stainless steel) and tube fittings for the food industry Tubes |
AS/NZS 2537.3:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system (ISO 15875-5:2003, MOD) (Reconfirmed 2022) |
AS 3600-2009 Supp 1:2014 | Concrete Structures - Commentary (Supplement to AS 3600-2009) |
AS/NZS 2642.2:2008 | Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications (Reconfirmed 2022) |
AS ISO 7.1-2008 | Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation |
AS/NZS 4671:2001 | Steel reinforcing materials |
AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
AS/NZS 2642.1:2007 | Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe extrusion compounds |
AS 1604.1-2012 | Specification for preservative treatment Sawn and round timber |
AS/NZS 4234:2008 | Heated water systems - Calculation of energy consumption |
AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
AS/NZS 2537.5:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Fittings for mechanical jointing (including PE-X/metal transitions) (ISO 14531-3:2006, MOD) |
AS/NZS 2537.4:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Guidance for the assessment of conformity (ISO/TS 15875-7:2003, MOD) |
AS 3795-1996 | Copper alloy tubes for plumbing and drainage applications |
AS 4176.2-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022) |
AS 4176.8-2010 | Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD) |
AS/NZS 4331.3:1995 | Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020) |
AS 4176.3-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Fittings (ISO 21003-3:2008, MOD) |
AS 4176.7-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity (ISO/TS 21003-7:2008, MOD) |
AS 3498-2009 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
AS 1478.1-2000 | Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
AS 5082.2-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017) |
AS 4809-2003 | Copper pipe and fittings - Installation and commissioning |
AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
AS 4087:2011 | Metallic flanges for waterworks purposes |
AS/NZS 4331.2:1995 | Metallic flanges Cast iron flanges (Reconfirmed 2020) |
AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
AS 3600-2009 | Concrete structures |
AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
AS/NZS 1167.2:1999 | Welding and brazing - Filler metals Filler metal for welding |
AS/NZS 3500.2:2015 | Plumbing and drainage Sanitary plumbing and drainage |
AS/NZS 2878:2000 | Timber - Classification into strength groups |
AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
SA TS 100:2018 | Vacuum WC pans, vacuum urinals and interface valves intended for use with vacuum drainage systems and designs |
AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
AS/NZS 4020:2018 | Testing of products for use in contact with drinking water |
AS 4809:2017 | Copper pipe and fittings - Installation and commissioning |
AS 5100.5:2017 | Bridge design Concrete |
AS/NZS 4765:2017 | Modified PVC (PVC-M) pipes for pressure applications |
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 2918:2018 | Domestic solid fuel burning appliances - Installation |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.