ISO 2811-1:2016
|
Paints and varnishes — Determination of density — Part 1: Pycnometer method
|
EN 4160:2011
|
Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure
|
ISO 2812-2:2007
|
Paints and varnishes Determination of resistance to liquids Part 2: Water immersion method
|
EN 3212 : 1995
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION TEST BY ALTERNATE IMMERSION IN A BUFFERED CHLORIDE SOLUTION
|
ISO 2811-3:2011
|
Paints and varnishes — Determination of density — Part 3: Oscillation method
|
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method
|
ISO 6270-1:1998
|
Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation
|
ISO 1520:2006
|
Paints and varnishes Cupping test
|
ISO 4628-8:2012
|
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect
|
ASTM E 275 : 2008
|
Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
|
ISO 3678:1976
|
Paints and varnishes — Print-free test
|
ISO 9117:1990
|
Paints and varnishes — Determination of through-dry state and through-dry time — Method of test
|
ISO 3679:2015
|
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
|
ISO 2811:1974
|
Paints and varnishes — Determination of density
|
ISO 11909:2007
|
Binders for paints and varnishes — Polyisocyanate resins — General methods of test
|
ISO 7253:1996
|
Paints and varnishes — Determination of resistance to neutral salt spray (fog)
|
ISO 2811-2:2011
|
Paints and varnishes Determination of density Part 2: Immersed body (plummet) method
|
ISO 1517:1973
|
Paints and varnishes Surface-drying test Ballotini method
|
ISO 1518:1992
|
Paints and varnishes Scratch test
|
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
|
ISO 2812:1974
|
Paints and varnishes — Determination of resistance to liquids
|
ISO 2811-4:2011
|
Paints and varnishes Determination of density Part 4: Pressure cup method
|
ISO 1513:2010
|
Paints and varnishes Examination and preparation of test samples
|
ISO 1519:2011
|
Paints and varnishes Bend test (cylindrical mandrel)
|
ISO 3680:2004
|
Determination of flash/no flash Rapid equilibrium closed cup method
|
ISO 3270:1984
|
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
|
ISO 1524:2013
|
Paints, varnishes and printing inks Determination of fineness of grind
|
ISO 2409:2013
|
Paints and varnishes Cross-cut test
|
ISO 9514:2005
|
Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing
|
ISO 4628-2:2016
|
Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
|
EN 3840:2007
|
Aerospace series - Paints and varnishes - Technical specification
|
ISO 2431:2011
|
Paints and varnishes Determination of flow time by use of flow cups
|