EN 12390-3:2009/AC:2011
|
TESTING HARDENED CONCRETE - PART 3: COMPRESSIVE STRENGTH OF TEST SPECIMENS
|
EN ISO 62:2008
|
Plastics - Determination of water absorption (ISO 62:2008)
|
ENV 12633 : DRAFT 2003
|
METHOD OF DETERMINATION OF UNPOLISHED AND POLISHED SLIP/SKID RESISTANCE VALUE
|
EN ISO 527-4:1997
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
|
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
|
EN 59:2016
|
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
|
89/106/EEC : 1988
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
|
ISO 1873-1:1995
|
Plastics Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications
|
EN 63 : 1977
|
GLASS REINFORCED PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES - THREE POINT METHOD
|
ISO 4892:1981
|
Plastics Methods of exposure to laboratory light sources
|
EN 13036-4:2011
|
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
|
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
|
EN ISO 3166-1:2014
|
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
|
ISO 2883:1980
|
Rubber, vulcanized — Antistatic and conductive products for industrial use — Electrical resistance limits
|
EN ISO 6603-1 : 2000
|
PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING
|
EN 287-2:1992/A1:1997
|
APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS
|
EN 12373-1 : 2001
|
ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
EN 1433:2002/A1:2005
|
DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY
|
EN ISO 14125:1998/A1:2011
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES
|
ISO 9001:2015
|
Quality management systems — Requirements
|
EN 1563:2011
|
Founding - Spheroidal graphite cast irons
|
ISO 14125:1998
|
Fibre-reinforced plastic composites Determination of flexural properties
|
EN 20105-A03 : 1994
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART A03: GREY SCALE FOR ASSESSING STAINING
|
EN 10130:2006
|
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
|
ISO 62:2008
|
Plastics Determination of water absorption
|
EN 206-1:2000/A2:2005
|
CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
|
ISO 3166-1:2013
|
Codes for the representation of names of countries and their subdivisions Part 1: Country codes
|
EN 20105-A02 : 1994
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993)
|
EN 1386:2007
|
Aluminium and aluminium alloys - Tread plate - Specifications
|
EN ISO 1873-1 : 1995
|
PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
|
EN ISO 306:2013
|
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
|
EN 513:1999
|
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
|
EN 1253-1:2015
|
GULLIES FOR BUILDINGS - PART 1: TRAPPED FLOOR GULLIES WITH A DEPTH WATER SEAL OF AT LEAST 50 MM
|
EN 1561:2011
|
Founding - Grey cast irons
|
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels
|
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels
|