|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories
|
|
API 5T1 : 2017
|
IMPERFECTION AND DEFECT TERMINOLOGY
|
|
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method
|
|
ISO 8501-1:2007
|
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
|
ASNT SNT TC 1A : 2016
|
TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
|
|
ASTM E 309 : 2016 : REDLINE
|
Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
|
|
ISO/TR 9769:1991
|
Steel and iron Review of available methods of analysis
|
|
API 5CT : 2012
|
CASING AND TUBING
|
|
MIL-STD-810 Revision G:2008
|
ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
|
|
NACE TM 02 84 : 2016
|
EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
|
|
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method
|
|
ASTM E 273 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
|
|
NACE TM 01 77 : 2016
|
LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS
|
|
ISO 9303:1989
|
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Full peripheral ultrasonic testing for the detection of longitudinal imperfections
|
|
ISO 9304:1989
|
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Eddy current testing for the detection of imperfections
|
|
ASTM E 83 : 2016 : REDLINE
|
Standard Practice for Verification and Classification of Extensometer Systems
|
|
API 5A2 : 6ED 88
|
BULLETIN ON THREAD COMPOUNDS FOR CASING, TUBING AND LINE PIPE
|
|
ASTM E 10 : 2017-05
|
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
|
|
ISO/IEC 17011:2004
|
Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies
|
|
ISO 9513:2012
|
Metallic materials — Calibration of extensometer systems used in uniaxial testing
|
|
ISO 6508-2:2015
|
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
|
|
NACE MR 01 75 : 2003
|
METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS
|
|
ISO 9598:1989
|
Seamless steel tubes for pressure purposes Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
|
|
ISO 31-0:1992
|
Quantities and units Part 0: General principles
|
|
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
|
|
ISO 9402:1989
|
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
|
|
ISO 13678:2010
|
Petroleum and natural gas industries Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
|
|
API 5C2 : 1999
|
BULLETIN ON PERFORMANCE PROPERTIES OF CASING, TUBING AND DRILL PIPE
|
|
API 5A3 : 2011
|
RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS
|
|
ISO 643:2012
|
Steels Micrographic determination of the apparent grain size
|
|
ISO 13665:1997
|
Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections
|
|
ISO 11484:2009
|
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel
|
|
ISO 6506-2:2017
|
Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines
|
|
API 5C3 : 1994
|
BULLETIN ON FORMULAS AND CALCULATIONS FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES
|
|
ISO/TR 10400:2007
|
Petroleum and natural gas industries Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing
|
|
ISO 7500-1:2015
|
Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
|
|
ISO 9764:1989
|
Electric resistance and induction welded steel tubes for pressure purposes Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
|
|
ASTM E 543 : 2015 : REDLINE
|
Standard Specification for Agencies Performing Nondestructive Testing
|
|
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing
|
|
ISO 9305:1989
|
Seamless steel tubes for pressure purposes Full peripheral ultrasonic testing for the detection of transverse imperfections
|
