ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY

Available format(s)

Hardcopy , PDF

Language(s)

English

Publisher

British Standards Institution

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
  3.1 Parameters
  3.2 Performance of houses
4 Fire safety performance
  4.1 User needs
  4.2 Performance description
  4.3 Principles for describing components of fire safety
      performance
5 Parameters for the description of performance
  5.1 General
  5.2 Parameters for describing early warning
  5.3 Parameters for describing fire suppression
  5.4 Parameters for describing containment of fire spread
  5.5 Parameters for describing adequate means of escape
  5.6 Parameters for describing control of structural behaviour
  5.7 Parameter for describing emission of smoke and toxic gases
6 Evaluation
  6.1 General
Annex A (informative) Commentary
      A Introduction
      A1 Scope
      A2 Normative references
      A3 Definitions
      A4 Fire safety performance
         A4.1 User needs
         A4.2 Performance description
         A4.3 Principles for describing components of fire safety
              performance
      A5 Parameters for the description of performance
         A5.1 Parameters for describing early warning
         A5.2 Parameters for describing fire suppression
         A5.3 Parameters for describing containment of fire spread
         A5.4 Parameters for describing adequate means of escape
         A5.5 Parameters for describing control of structural
              behaviour
         A5.6 Parameter for describing emission of smoke and toxic
              gases
      A6 Evaluation
Early warning
Suppression
Containment
Adequate means of escape
Control of structural behaviour
Control of emission of smoke and toxic gases

Committee	B/500
DocumentType	Draft
Pages	19
PublisherName	British Standards Institution
Status	Current

ISO/TR 834-3:2012	Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
ISO 6182-7:2004	Fire protection Automatic sprinkler systems Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers
ISO 5660-1:2015	Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
ISO 7240-15:2014	Fire detection and alarm systems Part 15: Point-type fire detectors using smoke and heat sensors
ISO 834-7:2000	Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns
ISO 6182-4:1993	Fire protection Automatic sprinkler systems Part 4: Requirements and test methods for quick-opening devices
ISO 5658-2:2006	Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
ISO 10093:1998	Plastics Fire tests Standard ignition sources
ISO 9705:1993	Fire tests Full-scale room test for surface products
ISO/TS 13571:2002	Life-threatening components of fire Guidelines for the estimation of time available for escape using fire data
ISO/TR 1896:1991	Products in fibre-reinforced cement Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection
ISO 1716:2010	Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
ISO 12468-1:2013	External exposure of roofs to fire Part 1: Test method
ISO 5657:1997	Reaction to fire tests Ignitability of building products using a radiant heat source
ISO/TR 7240-14:2003	Fire detection and alarm systems Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings
ISO 7165:2017	Fire fighting — Portable fire extinguishers — Performance and construction
ISO 12472:2003	Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
ISO 6182-11:2003	Fire protection Automatic sprinkler systems Part 11: Requirements and test methods for pipe hangers
ISO 834-8:2002	Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-loadbearing vertical separating elements
ISO 5660-2:2002	Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
ISO 834-4:2000	Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements
ISO 6182-1:2014	Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers
ISO 7240-4:2003	Fire detection and alarm systems Part 4: Power supply equipment
ISO 11925-2:2010	Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
ISO 13943:2017	Fire safety — Vocabulary
ISO 5658-4:2001	Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
ISO/TR 3814:1989	Tests for measuring "reaction-to-fire" of building materials — Their development and application
ISO 1182:2010	Reaction to fire tests for products Non-combustibility test
ISO 7240-2:2003	Fire detection and alarm systems Part 2: Control and indicating equipment
ISO 5923:2012	Equipment for fire protection and fire fighting Fire extinguishing media Carbon dioxide
ISO 12239:2010	Smoke alarms using scattered light, transmitted light or ionization
ISO/TR 9705-2:2001	Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance
ISO/TR 12470:1998	Fire-resistance tests Guidance on the application and extension of results
ISO 6182-5:2012	Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves
ISO/TR 10158:1991	Principles and rationale underlying calculation methods in relation to fire resistance of structural elements
ISO 11925-3:1997	Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test
ISO/TR 5660-3:2003	Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement
ISO 6182-2:2012	Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms
ISO 3009:2003	Fire-resistance tests Elements of building construction Glazed elements
ISO 7240-5:2012	Fire detection and alarm systems Part 5: Point-type heat detectors
ISO 834-9:2003	Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements
ISO 834-5:2000	Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements
ISO/TR 5658-1:1997	Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
ISO 834-1:1999	Fire-resistance tests Elements of building construction Part 1: General requirements
ISO 7240-1:2014	Fire detection and alarm systems — Part 1: General and definitions
ISO 7240-7:2011	Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
ISO 834-6:2000	Fire-resistance tests — Elements of building construction — Part 6: Specific requirements for beams
ISO/TR 11925-1:1999	Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability
ISO 6182-3:2012	Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves