ISO 3271:2015
|
Iron ores for blast furnace and direct reduction feedstocks Determination of the tumble and abrasion indices
|
ISO 4695:2015
|
Iron ores for blast furnace feedstocks Determination of the reducibility by the rate of reduction index
|
ISO 3310-1:2016
|
Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth
|
ISO 4696-2:2015
|
Iron ores for blast furnace feedstocks Determination of low-temperature reduction-disintegration indices by static method Part 2: Reduction with CO and N2
|
ISO 3310-2:2013
|
Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
|
ISO 4698:2007
|
Iron ore pellets for blast furnace feedstocks — Determination of the free-swelling index
|
ISO 11258:2015
|
Iron ores for shaft direct-reduction feedstocks Determination of the reducibility index, final degree of reduction and degree of metallization
|
ISO 5416:2006
|
Direct reduced iron Determination of metallic iron Bromine-methanol titrimetric method
|
ISO 7764:2006
|
Iron ores Preparation of predried test samples for chemical analysis
|
ISO 15967:2007
|
Direct reduced iron — Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
|
ISO 565:1990
|
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
|
ISO 3086:2006
|
Iron ores Experimental methods for checking the bias of sampling
|
ISO 11256:2015
|
Iron ore pellets for shaft direct-reduction feedstocks Determination of the clustering index
|
ISO 8371:2015
|
Iron ores for blast furnace feedstocks — Determination of the decrepitation index
|
ISO 4696-1:2015
|
Iron ores for blast furnace feedstocks Determination of low-temperature reduction-disintegration indices by static method Part 1: Reduction with CO, CO2, H2 and N2
|
ISO 15968:2016
|
Direct reduced iron Determination of apparent density and water absorption of hot briquetted iron (HBI)
|
ISO 8263:1992
|
Iron ore fines — Method for presentation of the results of sintering tests
|
ISO 2596:2006
|
Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods
|
ISO 13930:2015
|
Iron ores for blast furnace feedstocks Determination of low-temperature reduction-disintegration indices by dynamic method
|
ISO 9507:1990
|
Iron ores Determination of total iron content Titanium(III) chloride reduction methods
|
ISO 9517:2007
|
Iron ores Determination of water-soluble chloride Ion-selective electrode method
|
ISO Guide 30:2015
|
Reference materials Selected terms and definitions
|
ISO 3852:2007
|
Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
|
ISO 7335:1987
|
Iron ores Determination of combined water content Karl Fischer titrimetric method
|
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
|
ISO 2597-1:2006
|
Iron ores Determination of total iron content Part 1: Titrimetric method after tin(II) chloride reduction
|
ISO 7215:2015
|
Iron ores for blast furnace feedstocks Determination of the reducibility by the final degree of reduction index
|
ISO 7992:2015
|
Iron ores for blast furnace feedstocks Determination of reduction under load
|
ISO 9035:1989
|
Iron ores — Determination of acid-soluble iron(II) content — Titrimetric method
|
ISO 11257:2015
|
Iron ores for shaft direct-reduction feedstocks Determination of the low-temperature reduction-disintegration index and degree of metallization
|
ISO 4700:2015
|
Iron ore pellets for blast furnace and direct reduction feedstocks Determination of the crushing strength
|