Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

09/30196635 DC : 0

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

BS EN 60092-510 - ELECTRICAL INSTALLATIONS IN SHIPS - SPECIAL FEATURES - HIGH VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS)
Available format(s)

Hardcopy , PDF

Superseded date

31-07-2012

Language(s)

English

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
4 System
   4.1 System description
   4.2 Distribution system
   4.3 Compatibility assessment before connection
   4.4 System integration and management
   4.5 Personnel safety
   4.6 Design requirements
   4.7 Electrical requirements
   4.8 System study and calculations
   4.9 Emergency shutdown including emergency
        stop facilities
SECTION TWO - SHORE REQUIREMENTS
5 HV-shore supply system
   5.1 Current Inrush
   5.2 Voltages and frequencies
   5.3 Quality of HV-shore power supply
6 Installation
   6.1 General
   6.2 Components and system requirements
   6.3 Protection system
   6.4 High-voltage (HV) interlocking concept
   6.5 Shore-connection converter equipment
SECTION THREE - SHIP-TO-SHORE CONNECTION AND
INTERFACE EQUIPMENT
7 General
   7.1 Ship-to-shore connection and interface
        equipment
   7.2 Plugs and socket-outlets
   7.3 Interlocking of earthing switches
   7.4 Ship-to-shore connection cable
   7.5 Control and monitoring cable
   7.6 Storage
SECTION FOUR - SHIP REQUIREMENTS
8 Installation
   8.1 General
   8.2 Ship-electrical-distribution-system
        protection
   8.3 Connection switchboard
   8.4 Connection-switchboard instrumentation
        and protection
   8.5 On-board transformer
   8.6 Receiving switchboard connection point
   8.7 Ship power restoration
9 HVSC-System control and monitoring
   9.1 General requirements
   9.2 Load transfer via black out
   9.3 Temporary parallel connection for load
        transfer
SECTION FIVE - VERIFICATION AND TESTING
10 Initial tests
   10.1 General
   10.2 Initial tests of shore side installation
   10.3 Initial tests of ship side installation
   10.4 Tests at the first call at a shore supply
        point
11 Periodic tests and maintenance
   11.1 General
   11.2 Tests at repeated calls of a shore
        supply point
12 Documentation
   12.1 General
   12.2 System description
Annex A (Normative) - Plugs and socket-outlets
      A.1 Test specimen
      A.2 Type testing of plugs and socket-outlets
      A.3 Coding and specification of plugs
           and socket-outlets
      A.4 Fibre optical plug/socket
Annex B (normative) - Ship-to-shore connection cable
      B.1 Rated voltage
      B.2 General design requirements
      B.3 Tests on complete cables
Annex C (Normative) - Additional requirements for ships with
                      low voltage distribution systems
      C.1 Scope
      C.2 Normative references
      C.3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
      C.4 System
SECTION TWO - SHORE REQUIREMENTS
      C.5 HV-shore supply system
      C.6 Installation
SECTION THREE - SHORE-TO-SHIP CONNECTION AND
INTERFACE EQUIPMENT
      C.7 General
SECTION FOUR - SHIP REQUIREMENTS
      C.8 Installation
      C.9 HVSC-System control and monitoring
SECTION FIVE - VERIFICATION AND TESTING
      C.10 Tests of completed installation
      C.11 Tests after commissioning
      C.12 Documentation
Annex D (Normative) - Additional requirements for
                      cruise ships
      D.1 Scope
      D.2 Normative references
      D.3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
      D.4 System
SECTION TWO - SHORE REQUIREMENTS
      D.5 HV-shore supply system
      D.6 Installation
SECTION THREE - SHIP-TO-SHORE CONNECTION AND
INTERFACE EQUIPMENT
      D.7 General
SECTION FOUR - SHIP REQUIREMENTS
      D.8 Installation
      D.9 HVSC-System control and monitoring
SECTION FIVE - VERIFICATION AND TESTING
      D.10 Tests of completed installation
      D.11 Tests after commissioning
      D.12 Documentation
Annex E (Normative) - Additional requirements of
                      container vessels
      E.1 Scope
      E.2 Normative references
      E.3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
      E.4 System
SECTION TWO - SHORE REQUIREMENTS
      E.5 HV-shore supply system
      E.6 Installation
SECTION THREE - SHORE-TO-SHIP CONNECTION
AND INTERFACE EQUIPMENT
      E.7 General
SECTION FOUR - SHIP REQUIREMENTS
      E.8 Installation
      E.9 HVSC-System control and monitoring
SECTION FIVE - VERIFICATION AND TESTING
      E.10 Initial tests
      E.11 Periodic tests and maintenance
      E.12 Documentation
Annex F (Normative) - Additional requirements of liquefied
                      natural gas carriers (LNG)
      F.1 Scope
      F.2 Normative references
      F.3 Terms and definitions
SECTION ONE - GENERAL REQUIREMENTS
      F.4 System
SECTION TWO - SHORE REQUIREMENTS
      F.5 HV-shore supply system
      F.6 Installation
SECTION THREE - SHORE-TO-SHIP CONNECTION AND
INTERFACE EQUIPMENT
      F.7 General
SECTION FOUR - SHIP REQUIREMENTS
      F.8 Installation
      F.9 HVSC-System control and monitoring
SECTION FIVE - VERIFICATION AND TESTING
      F.10 Tests of completed installation
      F.11 Tests after commissioning
      F.12 Documentation

BS EN 60092-510

Committee
JPEL/18
DocumentType
Draft
Pages
80
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
IEC TR 60721-4-6:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Ship environment
IEC 61936-1:2010+AMD1:2014 CSV Power installations exceeding 1 kV a.c. - Part 1: Common rules
IEC 60228:2004 Conductors of insulated cables
IEC 62271-200:2011 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
MIL-PRF-29504-5 Revision E:2016 TERMINI, FIBER OPTIC, CONNECTOR, REMOVABLE, ENVIRONMENT RESISTING, SOCKET TERMINUS, SIZE 16, REAR RELEASE, MIL-DTL-38999, SERIES 3
DIN VDE 0472-512 : 1985 TESTING OF CABLES, WIRES AND FLEXIBLE CORDS; RESISTANCE BETWEEN PROTECTIVE CONDUCTOR AND SEMI-CONDUCTIVE LAYER
IEC 60793-2:2015 Optical fibres - Part 2: Product specifications - General
ISO 4649:2017 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device
IEC 60502-4:2010 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<sub>m</sub> = 1,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV)
IEC 60092-352:2005 Electrical installations in ships - Part 352: Choice and installation of electrical cables
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
IEC 60092-504:2016 Electrical installations in ships - Part 504: Automation, control and instrumentation
IEC 61363-1:1998 Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
IEC 60332-1-2:2004+AMD1:2015 CSV Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
IEC 60092-376:2017 Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV Common specifications for high-voltage switchgear and controlgear standards
IEC 60092-201:1994 Electrical installations in ships - Part 201: System design - General
IEC 60092-351:2004 Electrical installations in ships - Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables
MIL-DTL-38999 Revision M:2015 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60092-502:1999 Electrical installations in ships - Part 502: Tankers - Special features
IEC 62262:2002 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
MIL-STD-1560 Revision C:2015 INSERT ARRANGEMENTS FOR MIL-DTL-38999, MIL-DTL-27599 AND SAE-AS29600 SERIES A - ELECTRICAL CIRCULAR CONNECTORS
ISO 4892-2:2013 Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
IEC 60092-301:1980 Electrical installations in ships - Part 301: Equipment - Generators and motors
IEC 60811-1-4:1985 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature
IEC 60092-354:2014 Electrical installations in ships - Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV)
IEC 60092-101:1994+AMD1:1995 CSV Electrical installations in ships - Part 101: Definitions and general requirements
IEC 60721-3-6:1987 Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Ship environment
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
IEC 60092-303:1980 Electrical installations in ships - Part 303: Equipment - Transformers for power and lighting
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 61378-1:2011 Converter transformers - Part 1: Transformers for industrial applications
IEC 60092-350:2014 Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
IEC 60092-503:2007 Electrical installations in ships - Part 503: Special features - AC supply systems with voltages in the range of above 1 kV up to and including 15 kV

View more information
$39.22
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more