Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

09/30202316 DC : 0

Current
Current

The latest, up-to-date edition.

BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
Available format(s)

Hardcopy , PDF

Language(s)

English

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements
  4.1 General requirements
      4.1.1 General
      4.1.2 Materials
      4.1.3 Construction requirements
      4.1.4 Pressure strength
      4.1.5 Temperature range
      4.1.6 Flow resistance
      4.1.7 Function
      4.1.8 External leak-tightness
      4.1.9 Corrosion resistance
      4.1.10 Fireproof part
      4.1.11 Flood proof part
      4.1.12 Vacuum test
  4.2 Part related requirements
      4.2.1 Pipeline connections
      4.2.2 Rigid metallic pipes
      4.2.3 Non-metallic pipes
      4.2.4 Flexible pipes
      4.2.5 Fastener
5 Testing
  5.1 Verification of the resistance of non-metallic pipe
      materials against liquid fuel
      5.1.1 General
      5.1.2 Test preparation
      5.1.3 Test methods
  5.2 Testing of pipeline connections and fasteners
      5.2.1 General
      5.2.2 Type testing
      5.2.3 Factory production control
  5.3 Evaluation of conformity
6 Marking, packaging, and instructions
  6.1 General
  6.2 Marking
  6.3 Instructions for installation, maintenance, and operation
Annex A (normative) Rigid metallic pipes within the scope of
        prEN 12514-4
      A.1 Rigid metallic pipes for aboveground installations
          A.1.1 General
          A.1.2 Metallic pipes from non-alloy and alloy steels
          A.1.3 Pipes from stainless austenitic steels
          A.1.4 Copper and copper alloy pipes
          A.1.5 Aluminium pipes
      A.2 Rigid metallic pipes for buried installations
Annex B (normative) Union nut G 3/8 with 60 degrees internal cone
        as pipeline connection
Annex C (normative) Stud connectors with sealing ring
      C.1 General
      C.2 Stud end of stud connector
      C.3 Sealing ring
          C.3.1 Dimensions and designation
          C.3.2 Materials
Annex D (normative) Compression fittings for parts with G 3/8
        internal thread
      D.1 General
      D.2 Materials
      D.3 Design types
          D.3.1 Design type G
          D.3.2 Design type A
Bibliography

BS EN 12514-4

Committee
RHE/13
DocumentType
Draft
Pages
37
PublisherName
British Standards Institution
Status
Current

Standards Relationship
PREN 12514-4 : DRAFT 2009 Identical

PREN 12514-2 : DRAFT 2009 PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 2: SAFETY REQUIREMENTS AND TESTS - FEED PUMPS, CONTROL AND SAFETY DEVICES, SERVICE VESSELS
ISO 272:1982 Fasteners — Hexagon products — Widths across flats
EN 10208-2:2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
EN 13480-6:2017 Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13349:2002 Copper and coppper alloys - Pre-insulated copper tubes with solid covering
EN 1254-3:1998 Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
ISO 2578:1993 Plastics Determination of time-temperature limits after prolonged exposure to heat
ISO 1179-1:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
EN ISO 15875-2:2003/A1:2007 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 2: PIPES
EN 755-1:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
EN ISO 1179-3:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007)
EN 754-3:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 754-7:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
EN ISO 1179-1:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013)
EN 755-5:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
EN 1254-4:1998/AC:1999 COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
EN 1591-1:2013 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
ISO 8434-1:2007 Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
EN ISO 8434-4 : 2000 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES
EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 728:1997 Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
EN 1254-5:1998 Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996)
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 755-9:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
EN 1254-1:1998 Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
EN 1254-2:1998 Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
EN ISO 15876-2:2017 Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017)
ISO 12151-2:2003 Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
EN 755-3:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies
EN ISO 2578 : 1998 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT
ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
EN ISO 1179-2:2013 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013)
ISO 6162:1994 Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series
EN 755-8:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
ISO 9080:2012 Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
DIN 7603:2001-05 Sealing rings
ISO 9974-1:1996 Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports
EN 755-4:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
ISO 9974-3:1996 Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
EN ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
ISO 15875-2:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
EN 755-7:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
EN ISO 21003-2:2008/A1:2011 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011)
EN ISO 9080:2012 Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
EN 754-6:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
ISO 6162-2:2012 Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
ISO 15874-2:2013 Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
ISO 12151-5:2007 Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
EN 755-6:2008 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form
ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
ISO 1179-4:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
ISO 6149-3:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
EN 1092-4:2002 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
ISO 12151-3:2010 Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
EN ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)
ISO 8434-3:2005 Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
EN 754-1:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
EN ISO 9974-1:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996)
EN ISO 1179-4 : 2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
EN 15014:2007 Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints
EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017)
ISO 6508:1986 Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K)
EN 10241:2000 Steel threaded pipe fittings
EN 754-5:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
ISO 6149-1:2006 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal
ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
EN 10204:2004 Metallic products - Types of inspection documents
ISO 15876-2:2017 Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes
ISO 8434-4:1995 Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples
EN ISO 8434-1:2007/AC:2009 METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
ISO 21003-1:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
EN 754-8:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
ISO 9227:2017 Corrosion tests in artificial atmospheres — Salt spray tests
ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners — Specification
ISO 12151-1:2010 Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
EN 754-2:2016 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
ISO 21003-3:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 3: Fittings
ISO 12151-4:2007 Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends
EN ISO 15874-2:2013 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013)
PREN 12514-3 : DRAFT 2009 PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS
EN 10208-1:2009 Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
ISO 1179-2:2013 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
EN 10242:1994/A2:2003 THREADED PIPE FITTING IN MALLEABLE CAST IRON
EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
EN 754-4:2008 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
PREN 12514-1 : DRAFT 2009 PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
EN 13160-1:2016 Leak detection systems - Part 1: General Principles
ISO 6149:1980 Fluid power systems and components Metric ports Dimensions and design
EN 755-2:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
ISO 1179-3:2007 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids

View more information
$39.22
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more