12/30258453 DC : 0

Superseded

BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS

Available format(s)

Hardcopy , PDF

Superseded date

30-09-2014

Language(s)

English

Publisher

British Standards Institution

BS EN 62368-1 AMD

Committee	EPL/108
DocumentType	Draft
Pages	23
PublisherName	British Standards Institution
Status	Superseded

IEC 60695-11-20:2015	Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV	Information technology equipment - Safety - Part 1: General requirements
IEC 60112:2003+AMD1:2009 CSV	Method for the determination of the proof and the comparative tracking indices of solid insulating materials
EN 60999-2:2003	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)
ISO 4892-1:2016	Plastics Methods of exposure to laboratory light sources Part 1: General guidance
IEC 60728-11:2016	Cable networks for television signals, sound signals and interactive services - Part 11: Safety
EN 60998-1:2004	Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
IEC 61558-2-1:2007	Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV	Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
IEC 60245-1:2003+AMD1:2007 CSV	Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
ISO 7010:2011	Graphical symbols Safety colours and safety signs Registered safety signs
IEC 60998-1:2002	Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
IEC 60738-1:2006+AMD1:2009 CSV	Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
IEC 62209-2:2010	Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)
IEC 60107-1:1997	Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies
EN ISO 8256:2004	Plastics - Determination of tensile-impact strength (ISO 8256:2004)
EN 60747-5-2:2001/A1:2002	DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-2: OPTOELECTRONIC DEVICES - ESSENTIAL RATINGS AND CHARACTERISTICS
IEC 60664-4:2005	Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
IEC 61984:2008	Connectors - Safety requirements and tests
IEC 60227-7:1995+AMD1:2003+AMD2:2011 CSV	Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
EN 61558-2-16:2009/A1:2013	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013)
EN 61558-2-4:2009	Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
IEC 60384-14:2013+AMD1:2016 CSV	Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
EN ISO 180:2000/A2:2013	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013)
ISO 871:2006	Plastics Determination of ignition temperature using a hot-air furnace
IEC 60896-11:2002	Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests
EN 60825-1:2014/AC:2017-06	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
EN 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
EN 61427:2005	Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test
EN 60825-12:2004	Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
EN 60079-10-1:2015	Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
IEC 61427:2005	Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test
IEC 62209-1:2016	Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)
EN 60065:2014/AC:2017-01	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
IEC 61960:2011	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications
EN ISO 4892-1:2016	Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN 60085:2008	Electrical insulation - Thermal evaluation and designation
EN 62087:2012	Methods of measurement for the power consumption of audio, video and related equipment
ISO 3864-2:2016	Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
EN 60695-10-2:2014	Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
IEC 61558-2-4:2009	Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
IEC 61293:1994	Marking of electrical equipment with ratings related to electrical supply - Safety requirements
IEC TS 61201:2007	Use of conventional touch voltage limits - Application guide
EN 61434:1996	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to the designation of current in alkaline secondary cell and battery standards
EN 61558-1:2005/A1:2009	SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
EN 60332-2-2:2004	Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
EN ISO 9773:1998/A1:2003	Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)
EN 60127-1:2006/A2:2015	MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINKS
IEC TR 60083:2015	Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
ISO 9773:1998	Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
IEC 60332-1-3:2004+AMD1:2015 CSV	Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for determination of flamingdroplets/particles
IEC TR 62471-2:2009	Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
EN 60738-1:2006/A1:2009	THERMISTORS - DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT - PART 1: GENERIC SPECIFICATION
IEC 60999-2:2003	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
IEC 60896-21:2004	Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
IEC 60269-2:2013+AMD1:2016 CSV	Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
EN 60950-1:2006/A2:2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
IEC 61558-2-16:2009+AMD1:2013 CSV	Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particularrequirements and tests for switch mode power supply units andtransformers for switch mode power supply units
IEC 60130-9:2011	Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
EN 60747-5-3:2001/A1:2002	DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-3: OPTOELECTRONIC DEVICES - MEASURING METHODS
IEC 60332-2-2:2004	Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame
IEC 60825-1:2014	Safety of laser products - Part 1: Equipment classification and requirements
EN 60027-1:2006/A2:2007	LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL
EN ISO 178:2010/A1:2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
EN 60691:2016	Thermal-links - Requirements and application guide
ISO 8256:2004	Plastics — Determination of tensile-impact strength
EN 60908:1999	Audio recording - Compact disc digital audio system
IEC 60825-12:2004	Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
IEC 60079-10-1:2015	Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
EN 61056-1:2012	General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test
IEC 61810-1:2015	Electromechanical elementary relays - Part 1: General and safety requirements
IEC 60950-22:2016	Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
IEC 60950-23:2005	Information technology equipment - Safety - Part 23: Large data storage equipment
EN 61558-2-17:1997	Safety of power transformers, power supply units and similar - Part 2-17: Particular requirements for transformers for switch mode power supplies
EN 60747-5-1:2001/A2:2002	DISCRETE SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS - PART 5-1: OPTOELECTRONIC DEVICES - GENERAL
IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV	Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links
IEC 60747-5-2:1997+AMD1:2002 CSV	Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
IEC 60695-10-3:2016	Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
EN 60947-1:2007/A2:2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
IEC 60027-1:1992	Letters symbols to be used in electrical technology - Part 1: General
IEC 60851-6:2012	Winding wires - Test methods - Part 6: Thermal properties
IEC 60851-5:2008+AMD1:2011 CSV	Winding wires - Test methods - Part 5: Electrical properties
IEC 60332-1-1:2004+AMD1:2015 CSV	Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulatedwire or cable - Apparatus
EN 61056-2:2012	General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
IEC 60747-5-3:1997+AMD1:2002 CSV	Discrete semiconductor devices and integrated circuits - Part 5-3: Optoelectronic devices - Measuring methods
IEC 61056-2:2012	General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking
IEC 60227-1:2007	Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC 60332-1-2:2004+AMD1:2015 CSV	Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame
EN 60112 : 2003 AMD 1 2009	METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
IEC 60505:2011	Evaluation and qualification of electrical insulation systems
EN 60747-5-5:2011/A1:2015	SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013)
IEC 60999-1:1999	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
EN 60728-11:2017	Cable networks for television signals, sound signals and interactive services - Part 11: Safety
IEC 60601-2-4:2010	Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
EN 61189-3:2008	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
IEC 60085:2007	Electrical insulation - Thermal evaluation and designation
IEC 61558-2-17:1997	Safety of power transformers, power supply units and similar - Part2: Particular requirements for transformers for switch mode powersupplies
IEC 60908:1999	Audio recording - Compact disc digital audio system
EN 61959:2004	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries
IEC 61558-1:2017	Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
EN 60332-1-1:2004/A1:2015	Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
EN 50332-1:2013	Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment"
ISO 180:2000	Plastics Determination of Izod impact strength
EN 61558-2-1:2007	Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
IEC 60906-2:2011	IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c.
EN 60851-6:2012	Winding wires - Test methods - Part 6: Thermal properties
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
EN ISO 179 : 1996	PLASTICS - DETERMINATION OF CHARPY IMPACT STRENGTH
ISO 9772:2012	Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
IEC 61058-1:2016	Switches for appliances - Part 1: General requirements
IEC 60896-22:2004	Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
IEC 61189-3:2007	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
IEC 60691:2015	Thermal-links - Requirements and application guide
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV	Low-voltage switchgear and controlgear - Part 1: General rules
IEC 61056-1:2012	General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test
IEC 60695-11-10:2013	Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN 60695-10-3:2016	Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
IEC 61051-2:1991	Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors
EN 60896-11:2003	Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests
EN 61032:1998	Protection of persons and equipment by enclosures - Probes for verification
EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 61643-11:2011	Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
IEC TS 60695-11-21:2005	Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials
IEC 60906-1:2009	IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
EN 50332-2:2013	Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design
IEC 60851-3:2009+AMD1:2013 CSV	Winding wires - Test methods - Part 3: Mechanical properties
EN 61960:2011	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications
IEC 60664-5:2007	Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
EN 60130-9:2011	Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
ISO 4892-4:2013	Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
EN 60317-43:1997/A1:2010	SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240
EN 62209-1:2016	Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz)
IEC 62471:2006	Photobiological safety of lamps and lamp systems
IEC 60332-2-1:2004	Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
ISO 179-1:2010	Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
EN 60950-22:2017	Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
EN 62209-2:2010	HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ)
EN 60068-2-78:2013	Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
ISO 306:2013	Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
EN 61965:2003	Mechanical safety of cathode ray tubes
ISO 4892-2:2013	Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
EN 60068-2-6:2008	Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN 60086-4:2015	Primary batteries - Part 4: Safety of lithium batteries
EN 50395 : 2005 AMD 1 2011	ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
EN 61058-1:2002/A2:2008	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
IEC 61965:2003	Mechanical safety of cathode ray tubes
IEC 61434:1996	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Guide to designation of current in alkaline secondary cell and battery standards
IEC 60664-3:2016	Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
EN 60999-1:2000	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
EN 61140:2016	Protection against electric shock - Common aspects for installation and equipment
EN 61558-2-6:2009	Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
EN 60335-1:2012/A13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
IEC 60747-5-1:1997+AMD1:2001+AMD2:2002 CSV	Discrete semiconductor devices and integrated circuits - Part 5-1: Optoelectronic devices - General
EN 60332-2-1:2004	Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus
IEC 60747-5-5:2007+AMD1:2013 CSV	Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers
IEC 62133 : 2.0EN+(REDLINE+VERSION)	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
EN 61984:2009	Connectors - Safety requirements and tests
IEC 60695-10-2:2014	Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
EN 60664-4:2006/corrigendum:2006	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 4: CONSIDERATION OF HIGH-FREQUENCY VOLTAGE STRESS
IEC 61508-1:2010	Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)
IEC 60086-4:2014	Primary batteries - Part 4: Safety of lithium batteries
EN 60601-1-4:1996/A1:1999	MEDICAL ELECTRICAL EQUIPMENT - GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS
ISO 4046-4:2002	Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products
EN 61293:1994	Marking of electrical equipment with ratings related to electrical supply - Safety requirements
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
ISO 7000:2014	Graphical symbols for use on equipment Registered symbols
EN 60896-22:2004	Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
IEC 60317-43:1997+AMD1:2010 CSV	Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240
EN 60107-1:1997	Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies
IEC 61140:2016	Protection against electric shock - Common aspects for installation and equipment
EN 60825-2:2004/A2:2010	SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
EN 60664-5:2007	Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
IEC 61204-7:2016 EXV	LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS
EN 60695-11-5:2017	Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 61032:1997	Protection of persons and equipment by enclosures - Probes for verification
EN 60505:2011/AC:2017-03	EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
IEC 61959:2004	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries
IEC 60695-11-5 : 2.0	FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
EN 62471:2008	Photobiological safety of lamps and lamp systems
EN 60950-23:2006/corrigendum:2008	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
ISO 178:2010	Plastics Determination of flexural properties
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN ISO 306:2013	Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
EN 60896-21:2004	Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
EN ISO 4892-2:2013	Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN 60664-3:2017	Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
IEC 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN 50396 : 2005 AMD 1 2011	NON ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
IEC 62485-2:2010	Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
EN 60851-5:2008/A1:2011	WINDING WIRES - TEST METHODS - PART 5: ELECTRICAL PROPERTIES (IEC 60851-5:2008)
EN 60332-1-3:2004/A1:2015	TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES (IEC 60332-1-3:2004/A1:2015)
IEC 60990:2016	Methods of measurement of touch current and protective conductor current
EN 60730-1:2016	Automatic electrical controls - Part 1: General requirements
IEC TS 62393:2005	Portable and hand-held multimedia equipment - Mobile computers - Battery run-time measurement
EN 60269-1:2007/A2:2014	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements
EN 60990:2016	Methods of measurement of touch current and protective conductor current
EN 61189-2:2006	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN 62133:2013	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications