Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

12/30270980 DC : 0

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
Available format(s)

Hardcopy , PDF

Superseded date

30-06-2014

Language(s)

English

Foreword
0 Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Risk assessment
5 Possible ignition sources
6 Risk reduction
7 Information for use
Annex A (informative) - Relation between categories
        and hazardous atmospheric conditions
Annex B (normative) - Tools for use in potentially
        explosive atmospheres
Annex C (informative) - Significant technical changes
        between this document and the previous
        edition of this European Standard
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 94/9/EC
Annex ZB (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 2006/42/EC
Bibliography

BS EN 1127-2

Committee
EXL/23
DocumentType
Draft
Pages
37
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

Standards Relationship
PREN 1127-2 : DRAFT 2012 Identical

EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 50033 : 1991 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 50053-2 : 1989 REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC POWDER SPRAY GUNS WITH AN ENERGY LIMIT OF 5 MJ AND THEIR ASSOCIATED EQUIPMENT
EN 15089:2009 Explosion isolation systems
EN 61241-2-2:1995 Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers
EN 50053-3 : 1989 REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC FLOCK SPRAY GUNS WITH AN ENERGY LIMIT OF 0.24 MJ OR 5MJ AND THEIR ASSOCIATED APPARATUS
EN 61241-4:2006 Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD"
EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 1710:2005+A1:2008/AC:2010 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
IEC 60079-30-2:2007 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
EN 60079-29-1:2016 Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
89/686/EEC : 1989 AMD 5 2012 COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT
IEC 61340-4-4:2012+AMD1:2014 CSV Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediatebulk containers (FIBC)
EN 13980:2002 Potentially explosive atmospheres - Application of quality systems
EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 1834-2:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
EN 14373:2005 Explosion suppression systems
EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 50053-1 : 1987 REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC PAINT SPRAY GUNS WITH AN ENERGY LIMIT OF 0.24 MJ AND THEIR ASSOCIATED APPARATUS
EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection
IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
EN 14797:2006 Explosion venting devices
EN 14591-1:2004/AC:2006 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 1: 2-BAR EXPLOSION PROOF VENTILATION STRUCTURE
EN 14983:2007 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
IEC 61241-0:2004 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-11:2005 Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety 'iD'
EN 50050:2006 Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment
EN 50017:1998 Electrical apparatus for potentially explosive atmospheres - Powder filling "q"
EN 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
EN 14591-4:2007/AC:2008 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
EN 13463-6:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b'
EN 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
CLC/TR 50426:2004 Assessment of inadvertent initiation of bridge wire electro-explosive devices by radio-frequency radiation - Guide
IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
EN 14986:2017 Design of fans working in potentially explosive atmospheres
IEC 61241-17:2005 Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
EN 60079-31:2014 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
EN 14591-2:2007/AC:2008 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 2: PASSIVE WATER TROUGH BARRIERS
EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
EN 62305-3:2011 Protection against lightning - Part 3: Physical damage to structures and life hazard
EN 13463-8:2003 Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid immersion 'k'
EN 61241-1:2004/corrigendum Dec. 2006 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
IEC 61241-1:2004 Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
EN 60079-25:2010/AC:2013 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
EN 61340-4-4:2012/A1:2015 ELECTROSTATICS - PART 4-4: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTROSTATIC CLASSIFICATION OF FLEXIBLE INTERMEDIATE BULK CONTAINERS (FIBC) (IEC 61340-4-4:2012)
EN 61241-11:2006 Electrical apparatus for use in the presence of combustible dust - Part 11: Protection by intrinsic safety "iD"
IEC 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
EN 13463-2:2004 Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr'
IEC 61241-18:2004 Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation 'mD'
IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
ISO 16852:2016 Flame arresters Performance requirements, test methods and limits for use
EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
EN 60079-10:2003 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
EN 62305-2:2012 Protection against lightning - Part 2: Risk management
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
EN 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
IEC 61241-4:2001 Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protection "pD"
EN 60079-14:2014/AC:2016 EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
IEC 62305-2:2010 Protection against lightning - Part 2: Risk management
EN 61241-18:2004 Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation "mD"
CLC/TR 50427:2004 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide
EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd'
EN 60079-30-2:2017 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
EN 61241-17:2005 Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
IEC 62305-3:2010 Protection against lightning - Part 3: Physical damage to structures and life hazard
IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
IEC 60079-26:2014 RLV Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN ISO 16852:2016 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
CLC/TR 50404:2003 Electrostatics - Code of practice for the avoidance of hazards due to static electricity
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
EN 60079-2:2014/AC:2015 EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014)

View more information
$39.22
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more