Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

17/30353403 DC : 0

NA
NA

Status of Standard is Unknown

BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS
Available format(s)

Hardcopy , PDF

Language(s)

English

European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Required characteristics and corresponding
  methods of test
5 Assessment and verification of constancy of
  performance (AVCP)
6 Marking
Annex A (normative) - Durability aspects
Annex B (normative) - Determination of thickness of erosion
        control products
Annex C (normative) - Determination of rebound resilience
        of erosion control products
Annex D (normative) - Behaviour of erosion control products
        at low and elevated temperatures
Annex E (normative) - Determination of opening size of
        erosion control products
Annex F (normative) - Determination of turf-filling ratioof
        erosion control products
Annex G (normative) - Determination of water absorption
        capacity of erosion control products - Immersion method
Annex H (normative) - Determination of smoulder resistance of
        erosion control products
Annex I (normative) - Environmental harmlessness test of
        erosion control products
Annex ZA (informative) - Relationship of this European
         Standard with Regulation (EU) No. 305/2011
Bibliography

BS EN 17097.

Committee
B/553
DocumentType
Draft
Pages
63
PublisherName
British Standards Institution
Status
NA

Standards Relationship
PREN 17097 : DRAFT 2017 Identical

EN ISO 14021:2016 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
EN 12226:2012 Geosynthetics - General tests for evaluation following durability testing
ISO 3310-1:2016 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth
EN 15933:2012 Sludge, treated biowaste and soil - Determination of pH
ISO 13438:2004 Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation
ISO 12956:2010 Geotextiles and geotextile-related products Determination of the characteristic opening size
EN ISO 10319:2015 Geosynthetics - Wide-width tensile test (ISO 10319:2015)
EN ISO 13426-2:2005 Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005)
ISO 10320:1999 Geotextiles and geotextile-related products Identification on site
EN ISO 1043-1:2011/A1:2016 PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
EN 14030:2001/A1:2003 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO ACID AND ALKALINE LIQUIDS
ISO 9863-1:2016 Geosynthetics Determination of thickness at specified pressures Part 1: Single layers
EN 1848-2 : 2001 FLEXIBLE SHEETS FOR WATER-PROOFING - DETERMINATION OF LENGTH, WIDTH, STRAIGHTNESS AND FLATNESS - PLASTIC AND RUBBER SHEETS FOR ROOF WATERPROOFING
EN ISO 13426-1 : 2003 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS
ISO 25619-2:2015 Geosynthetics Determination of compression behaviour Part 2: Determination of short-term compression behaviour
EN ISO 25619-2:2015 Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015)
ISO 10319:2015 Geosynthetics — Wide-width tensile test
ISO 14021:2016 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
EN 1484 : 1997 WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC)
ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
EN 12224 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
CEN/TR 15019 : 2005 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - ON-SITE QUALITY CONTROL
ISO 13426-2:2005 Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites
ISO 9862:2005 Geosynthetics — Sampling and preparation of test specimens
EN ISO 10320:1999 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE
ISO/TS 13434:2008 Geosynthetics Guidelines for the assessment of durability
EN 1744-3:2002 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates
EN ISO 10318-1:2015 Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015)
EN ISO 11058:2010 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO/TR 12960:1998 Geotextiles and geotextile-related products Screening test method for determining the resistance to liquids
ISO 11058:2010 Geotextiles and geotextile-related products Determination of water permeability characteristics normal to the plane, without load
ISO 13426-1:2003 Geotextiles and geotextile-related products Strength of internal structural junctions Part 1: Geocells
EN 12225 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST
ASTM D 7409 : 2015 : REDLINE Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
EN ISO 9863-1:2016 Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016)
EN 12457-1:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
ISO 9001:2015 Quality management systems — Requirements
ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
EN 1997-1:2004/A1:2013 EUROCODE 7: GEOTECHNICAL DESIGN - PART 1: GENERAL RULES
ISO 1043-1:2011 Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
EN 12447:2001 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO HYDROLYSIS IN WATER
EN ISO 12956:2010 Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:2010)
EN ISO 11925-2:2010/AC:2011 REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
ISO 9864:2005 Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products
EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
CEN/TS 14416:2014 Geosynthetic barriers - Test method for determining the resistance to roots
ISO 856:2006 Oil of peppermint (Mentha x piperita L.)

View more information
$39.22
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more