ACI 306R : 2016
Current
Current
The latest, up-to-date edition.
GUIDE TO COLD WEATHER CONCRETING
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2016
Publisher
CHAPTER 1 - INTRODUCTION AND SCOPE
CHAPTER 2 - NOTATION AND DEFINITIONS
CHAPTER 3 - OBJECTIVES, PRINCIPLES, AND
ECONOMY
CHAPTER 4 - GENERAL RECOMMENDATIONS
CHAPTER 5 - TEMPERATURE OF CONCRETE AS
MIXED AND PLACED, AND HEATING OF
MATERIALS
CHAPTER 6 - PREPARATION BEFORE CONCRETING
CHAPTER 7 - PROTECTION AGAINST FREEZING FOR
CONCRETE NOT REQUIRING CONSTRUCTION
SUPPORTS
CHAPTER 8 - PROTECTION AGAINST FREEZING FOR
STRUCTURAL CONCRETE REQUIRING
CONSTRUCTION SUPPORTS
CHAPTER 9 - EQUIPMENT, MATERIALS, AND METHODS
OF TEMPERATURE PROTECTION
CHAPTER 10 - CURING RECOMMENDATIONS AND METHODS
CHAPTER 11 - ACCELERATION OF SETTING AND STRENGTH
DEVELOPMENT
CHAPTER 12 - REFERENCES
Provides general recommendations, concrete temperature during mixing and placing, temperature loss during delivery, preparation for cold weather concreting, protection requirements for concrete with or without construction supports, estimating strength development, methods of protection, curing recommendations, and admixtures for accelerating setting and strength gain including antifreeze admixtures.
| Committee |
306
|
| DocumentType |
Standard
|
| ISBN |
9781945487156
|
| Pages |
24
|
| PublisherName |
American Concrete Institute
|
| Status |
Current
|
| Supersedes |
| CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
| ACI 332.1R : 2006 | GUIDE TO RESIDENTIAL CONCRETE CONSTRUCTION |
| ACI 304.2R : 2017 | GUIDE TO PLACING CONCRETE BY PUMPING METHODS |
| API 2N : 2015 | PLANNING, DESIGNING, AND CONSTRUCTING STRUCTURES AND PIPELINES FOR ARCTIC CONDITIONS |
| ACI SP 4 : 2014 | FORMWORK FOR CONCRETE |
| ACI 330.1R : 2003 | SPECIFICATION FOR UNREINFORCED CONCRETE PARKING LOTS |
| ACI 325.11R : 2001 | ACCELERATED TECHNIQUES FOR CONCRETE PAVING |
| ISO 19906:2010 | Petroleum and natural gas industries Arctic offshore structures |
| ANSI/AWWA D110:2013(R2018) | WIRE- AND STRAND-WOUND, CIRCULAR, PRESTRESSED CONCRETE WATER TANKS |
| ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ASTM F 2551 : 2009 | Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes |
| S6.1-14 | Commentary on S6-14, Canadian Highway Bridge Design Code |
| PIP STS02465 : 2012 | AUGERED CAST-IN-PLACE PILES INSTALLATION SPECIFICATION |
| NACE SP 01 87 : 2017 | DESIGN FOR CORROSION CONTROL OF REINFORCING STEEL IN CONCRETE |
| NACE 02203 : 0 | DESIGN, INSTALLATION, AND MAINTENANCE OF PROTECTIVE POLYMER FLOORING SYSTEMS FOR CONCRETE |
| ACI 237R : 2007 | SELF-CONSOLIDATING CONCRETE |
| 17/30298929 DC : DRAFT SEP 2017 | BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| ACI 330R : 2008 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF CONCRETE PARKING LOTS |
| ASCE 9 91 : 1991 | STANDARD PRACTICE FOR CONSTRUCTION AND INSPECTION OF COMPOSITE SLABS |
| ACI 304.5R : 91(R1997) | BATCHING, MIXING, AND JOB CONTROL OF LIGHTWEIGHT CONCRETE |
| CSA ISO 19906 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| UFC 3-250-04 : Change 2 | UNIFIED FACILITIES CRITERIA - STANDARD PRACTICE FOR CONCRETE PAVEMENTS |
| UNI EN ISO 19906 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| ACI 347 : 2004 | CONCRETE FORMWORK, GUIDE TO |
| ACI 228.1R : 2003 | IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
| ACI 349 : 2013 | CODE REQUIREMENTS FOR NUCLEAR SAFETY-RELATED CONCRETE STRUCTURES AND COMMENTARY |
| ACI 304.6R : 2009 | GUIDE FOR USE OF VOLUMETRIC-MEASURING AND CONTINUOUS-MIXING CONCRETE EQUIPMENT |
| CTI ESG 123 : 2012 | RECOMMENDED GUIDELINES FOR CONCRETE RESTORATION AND REPAIRS TO NATURAL AND MECHANICAL DRAFT COOLING TOWERS |
| ACI 207.2 : 1990 | EFFECT OF RESTRAINT, VOLUME CHANGE, AND REINFORCEMENT ON CRACKING OF MASSIVE CONCRETE |
| ACI 207.4R : 2005(R2012) | COOLING AND INSULATING SYSTEMS FOR MASS CONCRETE |
| ACI 207.5 : 1989 | ROLLER COMPACTED MASS CONCRETE |
| ACI 544.3R : 2008 | GUIDE FOR SPECIFYING, PROPORTIONING, AND PRODUCTION OF FIBER-REINFORCED CONCRETE |
| ACI 304R : 2000 | GUIDE FOR MEASURING, MIXING, TRANSPORTING AND PLACING CONCRETE |
| ACI ITG-4.2R : 2006 | MATERIALS AND QUALITY CONSIDERATIONS FOR HIGH-STRENGTH CONCRETE IN MODERATE TO HIGH SEISMIC APPLICATIONS |
| BS EN ISO 19906:2010 | Petroleum and natural gas industries. Arctic offshore structures |
| CSA ISO 19906 : 2011 : R2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| CTI ESG 153 : 0 | RECOMMENDED GUIDELINES FOR PORTLAND CEMENT CONCRETE FOR MECHANICAL DRAFT COOLING TOWERS |
| ACI 303R : 2012 | GUIDE TO CAST-IN-PLACE ARCHITECTURAL CONCRETE PRACTICE |
| ACI 311.4R : 2005 | GUIDE FOR CONCRETE INSPECTION |
| ACI 222.3R : 2011 | GUIDE TO DESIGN AND CONSTRUCTION PRACTICES TO MITIGATE CORROSION OF REINFORCEMENT IN CONCRETE STRUCTURES |
| ACI 325.12R : 2002 | Guide for Design of Jointed Concrete Pavements for Streets and Local Roads<br> |
| ACI 223 : 1998 | PRACTICE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE |
| ACI 543R : 2012 | GUIDE TO DESIGN, MANUFACTURE, AND INSTALLATION OF CONCRETE PILES |
| ACI 506.2M : 2013 | SPECIFICATION FOR SHOTCRETE [METRIC] |
| ACI 223R : 2010 | GUIDE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE |
| ACI 316R : 1982 | RECOMMENDATIONS FOR CONSTRUCTION OF CONCRETE PAVEMENTS AND CONCRETE BASES |
| ACI PRC-357 : 1984 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF FIXED OFFSHORE CONCRETE STRUCTURES |
| ASCE 3 91 : 1994 | STANDARD FOR THE STRUCTURAL DESIGN OF COMPOSITE SLABS |
| ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
| ACI 517.2R : 1992 | ACCELERATED CURING OF CONCRETE AT ATMOSPHERIC PRESSURE |
| 09/19984091 DC : DRAFT JAN 2009 | BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| ACI ITG-4.1 : 2007 | SPECIFICATION FOR HIGH-STRENGTH CONCRETE IN MODERATE TO HIGH SEISMIC APPLICATIONS |
| ACI 350.2R : 2004 | CONCRETE STRUCTURES FOR CONTAINMENT OF HAZARDOUS MATERIALS |
| ASTM F 2551 : 2009 : R2016 | Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes |
| ACI 365.1R : 2017 | REPORT ON SERVICE LIFE PREDICTION |
| ACI 313 : 2016 | DESIGN SPECIFICATION FOR CONCRETE SILOS AND STACKING TUBES FOR STORING GRANULAR MATERIALS AND COMMENTARY |
| AASHTO M 157 : 2013 | SPECIFICATION FOR READY-MIXED CONCRETE |
| ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
| ACI 304.1R : 1992 | GUIDE FOR THE USE OF PREPLACED AGGREGATE CONCRETE FOR STRUCTURAL AND MASS CONCRETE APPLICATIONS |
| ACI 308 : 92(R1997) | PRACTICE FOR CURING CONCRETE |
| ACI 224R : 2001 | CONTROL OF CRACKING OF CONCRETE STRUCTURES |
| ACI 221R : 1996 | GUIDE FOR USE OF NORMAL WEIGHT AND HEAVYWEIGHT AGGREGATES IN CONCRETE |
| ACI 345R : 2011 | GUIDE FOR CONCRETE HIGHWAY BRIDGE DECK CONSTRUCTION |
| ACI 311.5R : 2004 | GUIDE FOR CONCRETE PLANT INSPECTION AND TESTING OF READY-MIXED CONCRETE |
| ACI 347R : 2014 | GUIDE TO FORMWORK FOR CONCRETE |
| ACI PRC-506 : 2016 | GUIDE TO SHOTCRETE |
| ASTM C 685/C685M : 2017 : REDLINE | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
| EN ISO 19906:2010 | Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010) |
| NACE RP 01 87 : 2005 | DESIGN CONSIDERATIONS FOR CORROSION CONTROL OF REINFORCING STEEL IN CONCRETE |
| ACI PRC-308 : 2016 | GUIDE TO EXTERNAL CURING OF CONCRETE |
| ACI PRC-548.3 : 2009 | REPORT ON POLYMER-MODIFIED CONCRETE |
| ACI 305R : 2010 | GUIDE TO HOT WEATHER CONCRETING |
| ACI 349M : 2013 | CODE REQUIREMENTS FOR NUCLEAR SAFETY-RELATED CONCRETE STRUCTURES AND COMMENTARY |
| I.S. EN ISO 19906:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES |
| ACI 207.2R : 2007 | REPORT ON THERMAL AND VOLUME CHANGE EFFECTS ON CRACKING OF MASS CONCRETE |
| NACE 6G197 : 0 | DESIGN, INSTALLATION, AND MAINTENANCE OF COATING SYSTEMS FOR CONCRETE USED IN SECONDARY CONTAINMENT |
| ICC IBC Concrete Quality and Field Practices:2021 | Concrete Quality and Field Practices |
| ASTM C 900 : 2015 : REDLINE | Standard Test Method for Pullout Strength of Hardened Concrete |
| ASTM C 873/C873M : 2015 : REDLINE | Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| ACI 302.1R : 2015 | GUIDE TO CONCRETE FLOOR AND SLAB CONSTRUCTION |
| ASTM C 918/C918M : 2013 : REDLINE | Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength |
| ACI 207.4R : 2005(R2012) | COOLING AND INSULATING SYSTEMS FOR MASS CONCRETE |
| ACI 228.1R : 2003 | IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
| ACI 201.2R : 2008 | Guide to Durable Concrete |
| ASTM C 192/C192M : 2016-04 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
| ACI 207.1R : 2005 | GUIDE TO MASS CONCRETE |
| ASTM C 309 : 2011 : REDLINE | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
| ACI 332 : 2014 | RESIDENTIAL CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| ASTM C 597 : 2016 : REDLINE | Standard Test Method for Pulse Velocity Through Concrete |
| ACI 212.3R : 2016 | REPORT ON CHEMICAL ADMIXTURES FOR CONCRETE |
| ACI 347R : 2014 | GUIDE TO FORMWORK FOR CONCRETE |
| ASTM C 1064/C1064M : 2017 : REDLINE | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
| ASTM C 494/C494M : 2017 : REDLINE | Standard Specification for Chemical Admixtures for Concrete |
| ACI 306.1 : 1990 | STANDARD SPECIFICATION FOR COLD WEATHER CONCRETING |
| ACI 347.2R : 2017 | GUIDE FOR SHORING/RESHORING OF CONCRETE MULTISTORY BUILDINGS |
$121.13
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.