API SPEC 17E : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SPECIFICATION FOR SUBSEA UMBILICALS
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
24-06-2021
Published date
01-07-2017
Publisher
1 Scope
2 Normative References
3 Terms, Abbreviated Terms, and Definitions
4 Functional Requirements
5 Safety, Design and Testing Philosophy
6 Design Requirements
7 Component Design, Manufacture, and Test
8 Terminations and Ancillary Equipment Design
9 Umbilical Design
10 Umbilical Manufacture and Test
11 Factory Acceptance Tests
12 Storage
13 Pre-installation Activity
14 Load-out
15 Installation Operations
Bibliography
Annex A (informative) - This annex intentionally
left blank
Annex B (informative) - Information Provided in a Purchaser's
Functional Specification
Annex C (informative) - Load-effect Analysis
Annex D (informative) - Umbilical Testing
Annex E (normative) - Fatigue Testing
Annex F (informative) - Hose and Tube Preferred Sizes
Annex G (normative) - Characterization Tests for Hoses and
Umbilicals, Including Hoses
Annex H (normative) - Buckling of Metallic Tubes
Annex I (informative) - Tube Material Matrix
Annex J (informative) - Umbilical Full-scale Tests
Bibliography
Describes requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation, and operation of umbilicals and associated ancillary equipment for the petroleum and natural gas industries.
| DocumentType |
Standard
|
| Pages |
354
|
| ProductNote |
This product is unavailable in Cuba, Iran, North Korea, Syria NEW CHILD ADD ENDUM1 IS NOW ADDED
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| API TR 17TR5 : 2012 | AVOIDANCE OF BLOCKAGES IN SUBSEA PRODUCTION CONTROL AND CHEMICAL INJECTION SYSTEMS |
| EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
| 11/30253360 DC : 0 | BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| API 2T REDLINE : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API RP 17W : 2014 | RECOMMENDED PRACTICE FOR SUBSEA CAPPING STACKS |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| API 2T : 2010 : R2015 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API 17E REDLINE : 2010 | SPECIFICATION FOR SUBSEA UMBILICALS |
| API TR 17TR10 : 2015 | SUBSEA UMBILICAL TERMINATION (SUT) DESIGN RECOMMENDATIONS |
| UNI EN ISO 13628-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| ABS 0195 : 2015 COR 2018 | GUIDE FOR BUILDING AND CLASSING FLOATING OFFSHORE WIND TURBINE INSTALLATIONS |
| BS ISO 13628-5:2002 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
| API 17V : 2015 | RECOMMENDED PRACTICE FOR ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR SUBSEA APPLICATIONS |
| 04/302050 DC : DRAFT JAN 2004 | ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| API TR 17TR2 : 2003 | THE AGEING OF PA-11 IN FLEXIBLE PIPES |
| API 17F REDLINE : 2006 | SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
| API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
| API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| ISO 13628-5:2009 | Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
| ISO 13628-6:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
| BS EN ISO 13628-6:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
| EN ISO 13628-5:2009 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009) |
| EN ISO 13628-6:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
| I.S. EN ISO 13628-5:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| 12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| BS EN ISO 13628-5:2009 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| API RP 2T : 2010 | PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS |
| API TR 17TR9 : 2017 | UMBILICAL TERMINATION ASSEMBLY (UTA) SELECTION AND SIZING RECOMMENDATIONS |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| ASTM E 1001 : 2016 : REDLINE | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
| IEC 60038:2009 | IEC standard voltages |
| NEMA WC 74 : 2012 | 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
| IEC 60793-1-1 : 2017 | OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE |
| IEC 60228:2004 | Conductors of insulated cables |
| EN 10257-2:2011 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cables |
| API 17L2 : 2013 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
| IEC 60502-2:2014 RLV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) – Part 2: Cables for rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| API 17F : 2014 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ICEA S 93 639 : 2012 | 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY |
| NEMA WC 70 : 2009 | POWER CABLES RATED 2000 VOLTS OR LESS FOR THE DISTRIBUTION OF ELECTRICAL ENERGY |
| ISO 6801:1983 | Rubber or plastics hoses Determination of volumetric expansion |
| IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
| ASTM E 562 : 2011 : REDLINE | Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| IEC 60502-1:2004+AMD1:2009 CSV | Power cables with extruded insulation and their accessories for rated voltages from 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) up to 30 kV(<em>U</em><sub>m</sub> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
| NEMA WC 53 : 2016 | STANDARD TEST METHODS FOR EXTRUDED DIELECTRIC POWER, CONTROL, INSTRUMENTATION, AND PORTABLE CABLES FOR TEST |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ASTM E 273 : 2015 : REDLINE | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
| ASME B31.3:2016 | PROCESS PIPING |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| API 17L1 : 2013 | SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| ISO 10619-2:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures |
| ICEA S 94 649 : 2013 | CONCENTRIC NEUTRAL CABLES RATED 5 THROUGH 46 KV |
| ASTM E 426 : 2016 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| ISO 8308:2015 | Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls |
| ICEA T 27 581 : 2016 | STANDARD TEST METHODS FOR EXTRUDED DIELECTRIC POWER, CONTROL, INSTRUMENTATION, AND PORTABLE CABLES FOR TEST |
| IEC 62230:2006+AMD1:2013 CSV | Electric cables - Spark-test method |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| ISO 7751:2016 | Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
| ICEA S 97 682 : 2013 | UTILITY SHIELDED POWER CABLES RATED 5 THROUGH 46 KV |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 4080:2009 | Rubber and plastics hoses and hose assemblies Determination of permeability to gas |
| ISO 6803:2017 | Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| IEEE 400-2012 REDLINE | IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above |
| API RP 17I : 1996 | INSTALLATION GUIDELINES FOR SUBSEA UMBILICALS |
| ICEA T 24 380 : 2013 | PARTIAL DISCHARGE TEST PROCEDURE |
| API 17H : 2013 | REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
| ASTM E 8/E8M : 2016-09 | TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS |
| IEC 60794-1-21:2015 | Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
$369.94
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English - DRM
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.