API 2FPS : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
19-02-2021
English
01-01-2011
Special Notes
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Overall considerations
6 Basic design requirements
7 Actions and action effects
8 Global analysis
9 Structural considerations
10 Fatigue analysis and design
11 Monohulls
12 Semi-submersibles
13 Spars
14 Conversion and reuse
15 Hydrostatic stability and compartmentation
16 Mechanical systems
17 Stationkeeping systems
18 In-service inspection, monitoring and maintenance
19 Floating structure design and analysis - Other hulls
Annex A (informative) - Additional information and guidance
Annex B (normative) - API Floating Structures Design
Standards
Bibliography
Gives requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: a) production; b) storage and/or offloading; c) drilling and production; d) production, storage and offloading; and e) drilling, production, storage and offloading.
DocumentType |
Standard
|
Pages |
208
|
PublisherName |
American Petroleum Institute
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
API 2SIM : 2014 | STRUCTURAL INTEGRITY MANAGEMENT OF FIXED OFFSHORE STRUCTURES |
04/19985215 DC : DRAFT DEC 2004 | BS ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
ABS 0276 : 2017 COR 2018 | GUIDANCE NOTES ON CONVERSION OF MOBILE OFFSHORE DRILLING UNITS TO FLOATING PRODUCTION INSTALLATIONS |
API 2N : 2015 | PLANNING, DESIGNING, AND CONSTRUCTING STRUCTURES AND PIPELINES FOR ARCTIC CONDITIONS |
ISO 19904-1:2006 | Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
CSA ISO 19904-1 : 2007 : R2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
ABS 0249 : 2017 | GUIDANCE NOTES ON AIR GAP ANALYSIS FOR SEMI-SUBMERSIBLES |
17/30291980 DC : 0 | BS EN ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: SHIP-SHAPED, SEMI-SUBMERSIBLE, SPAR AND SHALLOW-DRAUGHT CYLINDRICAL STRUCTURES |
I.S. EN ISO 19904-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
BS EN ISO 19904-1:2006 | Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars |
EN ISO 19904-1:2006 | Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006) |
ABS 0286 : 2017 COR 2018 | GUIDANCE NOTES ON NEARSHORE POSITION MOORING |
ABS 0217 : 2017 | GUIDANCE NOTES ON LIFE EXTENSION METHODOLOGY FOR FLOATING PRODUCTION INSTALLATIONS |
BS ISO 19904-1 : 2006 AMD 16927 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
API 2INT-DG : 2007 | INTERIM GUIDANCE FOR DESIGN OF OFFSHORE STRUCTURES FOR HURRICANE CONDITIONS |
CSA ISO 19904-1 : 2007 : R2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
CSA ISO 19904-1 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
IMO IB701 : 2005 SUPP 2016 | INTERNATIONAL CONFERENCE ON LOAD LINES |
BS 7448-1:1991 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials |
BV NR494 : R02 | RULES FOR THE CLASSIFICATION OF OFFSHORE LOADING & OFFLOADING BUOYS |
ISO 17643:2015 | Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis |
ISO 19901-6:2009 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations |
ABS 0075 : 1995 | GUIDE FOR IMPROVEMENT FOR STRUCTURAL CONNECTIONS AND SAMPLE STRUCTURAL DETAILS - SERVICE EXPERIENCE AND MODIFICATIONS FOR TANKERS |
ISO 19901-2:2017 | Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
BV NR384 : R01 | HULL STRUCTURE DESIGN - ALUMINIUM ALLOY SHIPS (CHAPTER 12) |
ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
ISO 9089:1989 | Marine structures Mobile offshore units Anchor winches |
BV NR184 : R00 | RULES FOR THE CLASSIFICATION AND CERTIFICATION OF LIFTING APPLIANCES OF SHIPS AND OFFSHORE UNITS |
NORSOK N-003:2017 | ACTIONS AND ACTIONS EFFECTS |
AISC 325 : 2017 | STEEL CONSTRUCTION MANUAL |
ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
BV NI171 : R00 | SLOSHING ON BOARD SHIP PARTIAL FILLING STUDY |
ISO 10420:1994 | Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications |
API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
API 520-1 : 2014 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
BS 8010-3:1993 | Code of practice for pipelines Pipelines subsea: design, construction and installation |
API 2V : 2004 | DESIGN OF FLAT PLATE STRUCTURES |
IMO IE110 : 2009 | SOLAS (CONSOLIDATED EDITION) |
EN 13852-2:2004 | Cranes - Offshore cranes - Part 2: Floating cranes |
API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
ISO 6361-1:2011 | Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery |
ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
ISO 2394:2015 | General principles on reliability for structures |
ISO 17636:2003 | Non-destructive testing of welds Radiographic testing of fusion-welded joints |
ABS 0131 : 2004 COR 2012 | GUIDE FOR INERT GAS SYSTEM FOR BALLAST TANKS |
ABS 0132 : 2004 | GUIDANCE NOTES ON RELIABILITY-CENTERED MAINTENANCE |
ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
EN 12473:2014 | General principles of cathodic protection in seawater |
ISO 19903:2006 | Petroleum and natural gas industries Fixed concrete offshore structures |
NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
ABS 0120 : 2003 | GUIDE FOR SURVEYS USING RISK-BASED INSPECTION FOR THE OFFSHORE INDUSTRY |
IMO IB874 : 2009 SUPP 2011 | INTERNATIONAL CODE ON INTACT STABILITY |
ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
IMO IA617 : 2000 SUPP 2007 | CRUDE OIL WASHING SYSTEMS |
ISO 19901-3:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
BV NI299 : R00 | GUIDELINES ON DOCUMENTS TO BE SUBMITTED FOR STABILITY STUDY |
NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
IMO IA811 : 2001 | MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED |
API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
ISO 13535:2000 | Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
ISO 19906:2010 | Petroleum and natural gas industries Arctic offshore structures |
API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
ABS 0097 : 2000 | GUIDANCE NOTES ON RISK ASSESSMENT APPLICATION FOR MARINE AND OFFSHORE OIL AND GAS INDUSTRIES |
ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
ABS 0140 : 2006 COR 2017 | GUIDE FOR 'SAFEHULL DYNAMIC LOADING APPROACH' FOR VESSELS |
BV NR497 : R00 | HULL STRUCTURE OF PRODUCTION, STORAGE AND OFFLOADING SURFACE UNITS |
IMO I661 : 1998 | GUIDELINES ON HARMFUL AQUATIC ORGANISMS |
API RP 16Q : 2017 | DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
ISO 2103:1986 | Loads due to use and occupancy in residential and public buildings |
API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
ABS 0074 : 1995 | GUIDE FOR ASSESSING HULL GIRDER RESIDUAL STRENGTH FOR TANKERS |
ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
BS 7448-2:1997 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
BV NI409 : R00 | GUIDELINES FOR CORROSION PROTECTION OF SEAWATER BALLAST TANKS AND HOLD SPACES |
ABS 0003 : 1975 NOTICE 11 | RULES FOR BUILDING AND CLASSING ALUMINIUM VESSELS |
API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
API 2U : 2004 | BULLETIN ON STABILITY DESIGN OF CYLINDRICAL SHELLS |
BV NI393 : R01 | FATIGUE STRENGTH OF WELDED SHIP STRUCTURES |
BV NR460 : R00 | SAFETY FEATURES OF OFFSHORE UNITS AND INSTALLATIONS |
EN 13173 : 2001 | CATHODIC PROTECTION FOR STEEL OFFSHORE FLOATING STRUCTURES |
ABS 0122 : 2004 COR 2010 | GUIDANCE NOTES ON ALTERNATIVE DESIGN AND ARRANGEMENTS FOR FIRE SAFETY |
API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
ISO 19901-5:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction |
AWS D1.1 : 2000 | STRUCTURAL WELDING CODE - STEEL |
BV NR445 : 2016 | RULES FOR THE CLASSIFICATION OF OFFSHORE UNITS (FULL PACKAGE) |
IMO IA867 : 1996 | CODE ON ALARMS AND INDICATORS |
ABS 0073 : 2015 NOTICE 1 2016 | GUIDE FOR HULL CONDITION MONITORING SYSTEMS |
ISO 13628-5:2009 | Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
BV NI165 : R00 | ULTRASONIC TESTING OF HULL BUTT WELDS |
API 2TD : 2006 | GUIDELINES FOR TIE-DOWNS ON OFFSHORE PRODUCTION FACILITIES FOR HURRICANE SEASON |
API 520-2 : 2015 | SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
IMO IA646 : 2006 | POLLUTION PREVENTION EQUIPMENT UNDER MARPOL |
ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
API 2D : 2014 | OPERATION AND MAINTENANCE OF OFFSHORE CRANES |
ISO 76:2006 | Rolling bearings Static load ratings |
API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
EN 13852-1:2013 | Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
API 8A : 1997 | SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT |
NORSOK N 004 : REV 3 AC 2014 | DESIGN OF STEEL STRUCTURES |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.