|
PD CEN/TR 15235:2005
|
WELDING - METHODS FOR ASSESSING IMPERFECTIONS IN METALLIC STRUCTURES |
|
15/30316712 DC : 0
|
BS ISO 27306 - METALLIC MATERIALS - METHOD OF CONSTRAINT LOSS CORRECTION OF CTOD FRACTURE TOUGHNESS FOR FRACTURE ASSESSMENT OF STEEL COMPONENTS |
|
EI SAND EROSION & EROSION-CORROSION : 2017
|
GUIDELINES ON SAND EROSION AND EROSION-CORROSION MANAGEMENT |
|
CSA N285.7 : 2015
|
Periodic inspection of CANDU nuclear power plant balance of plant systems and components
|
|
PD 8010-4:2012
|
Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management |
|
API 570 REDLINE : 2009
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
|
MIL PRF 32080 : G
|
TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
|
BS PD ISO/TR 10400 : 2007
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EQUATIONS AND CALCULATIONS FOR THE PROPERTIES OF CASING, TUBING, DRILL PIPE AND LINE PIPE USED AS CASING OR TUBING |
|
API 579-2 : 2009
|
FITNESS-FOR-SERVICE EXAMPLE PROBLEM MANUAL |
|
API 574 : 2016
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
|
17/30293106 DC : 0
|
BS EN ISO 19345-2 - PETROLEUM AND NATURAL GAS INDUSTRY - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE INTEGRITY MANAGEMENT SPECIFICATION - PART 2: FULL-LIFE CYCLE INTEGRITY MANAGEMENT FOR OFFSHORE PIPELINE |
|
I.S. CEN/TR 15235:2005
|
WELDING - METHODS FOR ASSESSING IMPERFECTIONS IN METALLIC STRUCTURES |
|
API 17G : 2006 : R2011
|
RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
|
API 572 : 2016
|
INSPECTION PRACTICES FOR PRESSURE VESSELS |
|
ISO/TTA 5:2007
|
Code of practice for creep/fatigue testing of cracked components |
|
API 653 : 2014
|
TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
|
NACE SP 01 10 : 2010
|
WET GAS INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR PIPELINES |
|
API 530 : 2015
|
CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
|
NACE RP 02 05 : 2005
|
RECOMMENDED PRACTICE FOR THE DESIGN, FABRICATION, AND INSPECTION OF TANKS FOR THE STORAGE OF PETROLEUM REFINING ALKYLATION UNIT SPENT SULFURIC ACID AT AMBIENT TEMPERATURES |
|
ASME PTB 2 : 2009
|
GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
|
API TR 942-A : 2014
|
MATERIALS, FABRICATION, AND REPAIR CONSIDERATIONS FOR HYDROGEN REFORMER FURNACE OUTLET PIGTAILS AND MANIFOLDS |
|
API 530 REDLINE : 2008
|
CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
|
14/30286897 DC : 0
|
PD 8010-1 - PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
|
EEMUA 223 : 2010
|
PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER |
|
12/30241229 DC : 0
|
BS 7910 - GUIDE TO METHODS FOR ASSESSING THE ACCEPTABILITY OF FLAWS IN METALLIC STRUCTURES |
|
PD ISO/TR 22694:2008
|
GAS CYLINDERS - METHODS FOR ESTABLISHING ACCEPTANCE/REJECTION CRITERIA FOR FLAWS IN SEAMLESS STEEL AND ALUMINIUM ALLOY CYLINDERS AT TIME OF PERIODIC INSPECTION AND TESTING |
|
API 581 REDLINE : 2008
|
RISK-BASED INSPECTION TECHNOLOGY |
|
CSA S473 : 2004
|
STEEL STRUCTURES |
|
API 571 REDLINE : 2011
|
DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
|
ISO/TS 35105:2018
|
Petroleum and natural gas industries Arctic operations Material requirements for arctic operations |
|
EN 16991:2018
|
Risk-based inspection framework |
|
BS EN ISO 13704:2007
|
Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries |
|
ISO/TS 24817:2006
|
Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection |
|
BS 7910(2013) : 2013
|
GUIDE TO METHODS FOR ASSESSING THE ACCEPTABILITY OF FLAWS IN METALLIC STRUCTURES |
|
BS 7910:2005
|
GUIDE TO METHODS FOR ASSESSING THE ACCEPTABILITY OF FLAWS IN METALLIC STRUCTURES |
|
ASME PV CODE 8 DIV 3 : 2017
|
BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
|
ASME PCC 2 : 2015
|
REPAIR OF PRESSURE EQUIPMENT AND PIPING |
|
API 571 FRENCH : 2003
|
MECANISMES D'ENDOMMAGEMENT AFFECTANT LES EQUIPEMENTS STATIQUES DANS L'INDUSTRIE DU RAFFINAGE |
|
BS ISO 27306:2016
|
Metallic materials. Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components |
|
NACE SP 02 08 : 2008
|
INTERNAL CORROSION DIRECT ASSESSMENT METHODOLOGY FOR LIQUID PETROLEUM PIPELINES |
|
API 945:2003
|
AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
|
14/30286899 DC : 0
|
PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
|
08/30151040 DC : DRAFT MAR 2008
|
BS ISO 27306 - METALLIC MATERIALS - METHOD OF CONSTRAINT LOSS CORRECTION OF CTOD FRACTURE TOUGHNESS FOR FRACTURE ASSESSMENT OF STEEL COMPONENTS |
|
API 571 GERMAN : 2009
|
SCHADENSMECHANISMEN UND DEREN EINFLUSS AUF STATISCHE AUSRUESTUNGSTEILE IN DER RAFFINERIEINDUSTRIE |
|
UNI/TS 11325-1 : 2009
|
PRESSURE EQUIPMENT - PUTTING INTO SERVICE AND USE OF PRESSURE EQUIPMENT AND ASSEMBLIES - PART 1: ASSESSMENT OF INTEGRITY AND EFFICIENCY OF IN-SERVICE PIPELINES FOR THE PURPOSES OF PERIODIC REQUALIFICATION |
|
API TR 942-B : 2017
|
MATERIAL, FABRICATION, AND REPAIR CONSIDERATIONS FOR AUSTENITIC ALLOYS SUBJECT TO EMBRITTELEMENT AND CRACKING IN HIGH TEMPERATURE 565 DEGREES C TO 760 DEGREES C (1050 DEGREES F TO 1400 DEGREES F) REFINERY SERVICES |
|
API 584 : 2014
|
INTEGRITY OPERATING WINDOWS |
|
PD 8010-1:2004
|
CODE OF PRACTICE FOR PIPELINES - PART 1: STEEL PIPELINES ON LAND |
|
ISO 24817:2017
|
Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
|
API RP 2611 : 2011
|
TERMINAL PIPING INSPECTION - INSPECTION OF IN-SERVICE TERMINAL PIPING SYSTEMS |
|
FD ISO/TR 22694 : 2009 FD
|
GAS CYLINDERS - METHODS FOR ESTABLISHING ACCEPTANCE/REJECTION CRITERIA FOR FLAWS IN SEAMLESS STEEL AND ALUMINIUM ALLOY CYLINDERS AT TIME OF PERIODIC INSPECTION AND TESTING |
|
API 578 : 2018
|
GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
|
API 939-E : 2013
|
IDENTIFICATION, REPAIR, AND MITIGATION OF CRACKING OF STEEL EQUIPMENT IN FUEL ETHANOL SERVICE |
|
API 939-C : 2009
|
GUIDELINES FOR AVOIDING SULFIDATION (SULFIDIC) CORROSION FAILURES IN OIL REFINERIES |
|
BS EN ISO 24817:2017
|
Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
|
I.S. EN 16991:2018
|
RISK-BASED INSPECTION FRAMEWORK |
|
NACE SP 02 05 : 2010
|
DESIGN, FABRICATION, AND INSPECTION OF TANKS FOR THE STORAGE OF PETROLEUM REFINING ALKYLATION UNIT SPENT SULFURIC ACID AT AMBIENT TEMPERATURES |
|
API 1626 REDLINE : 2010
|
STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
|
NFPA 55 : 2016
|
COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
|
ISO 13704:2007
|
Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries |
|
NASA STD 5019 : 2016
|
FRACTURE CONTROL REQUIREMENTS FOR SPACEFLIGHT HARDWARE |
|
NASA STD 5019(INT) : 2006
|
FRACTURE CONTROL REQUIREMENTS FOR SPACEFLIGHT HARDWARE |
|
EEMUA 193 : 2013
|
MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT |
|
EEMUA 211 : 2016
|
GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS |
|
I.S. EN ISO 13704:2007
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
|
17/30293103 DC : 0
|
BS ISO 19345-1 - PETROLEUM AND NATURAL GAS INDUSTRY - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE INTEGRITY MANAGEMENT SPECIFICATION - PART 1: FULL-LIFE CYCLE INTEGRITY MANAGEMENT FOR ONSHORE PIPELINE |
|
BS ISO 13628-7 : 2005 AMD 16887
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
|
04/19991491 DC : DRAFT DEC 2004
|
BS ISO 10400 - PETROLEUM AND NATURAL GAS INDUSTRIES - FORMULAE AND CALCULATION FOR CASING, TUBING, DRILL PIPE AND LINE PIPE PROPERTIES |
|
NACE SP 01 13 : 2013
|
PIPELINE INTEGRITY METHOD SELECTION |
|
API 570 : 2016
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
|
14/30256269 DC : 0
|
BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
|
UNI CEN/TR 15235 : 2012
|
WELDING - METHODS FOR ASSESSING IMPERFECTIONS IN METALLIC STRUCTURES |
|
PD 8010-2:2004
|
CODE OF PRACTICE FOR PIPELINES - PART 2: SUBSEA PIPELINES |
|
DD ISO/TS 24817 : 2006
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
|
API 939-B : 2002
|
REPAIR AND REMEDIATION STRATEGIES FOR EQUIPMENT OPERATING IN WET H[2]S SERVICE |
|
API 573 : 2013
|
INSPECTION OF FIRED BOILERS AND HEATERS |
|
API 970 : 2017
|
CORROSION CONTROL DOCUMENTS |
|
API 653 CHINESE : 2014
|
TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
|
API 580 REDLINE : 2009
|
RISK-BASED INSPECTION |
|
API 585 : 2014
|
PRESSURE EQUIPMENT INTEGRITY INCIDENT INVESTIGATION |
|
API 2A WSD : 2014
|
PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
|
API 571 : 2011
|
DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
|
API 510 CHINESE : 2014
|
PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
|
API 570 CHINESE : 2009
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
|
API RP 1176 : 2016
|
RECOMMENDED PRACTICE FOR ASSESSMENT AND MANAGEMENT OF CRACKING IN PIPELINES |
|
S.R. CEN ISO TR 10400:2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EQUATIONS AND CALCULATIONS FOR THE PROPERTIES OF CASING, TUBING, DRILL PIPE AND LINE PIPE USED AS CASING OR TUBING |
|
ISO/TR 22694:2008
|
Gas cylinders Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing |
|
API 1626 : 2010
|
STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
|
ISO/TR 10400:2007
|
Petroleum and natural gas industries Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
|
BS EN ISO 13628-7:2006 (published 2007-01)
|
Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
|
ISO 13628-7:2005
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
|
EN ISO 13628-7:2006
|
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
|
16/30337806 DC : 0
|
BS EN 16991 - RISK BASED INSPECTION FRAMEWORK (RBIF) |
|
NASA JSC 25863 : 2009
|
FRACTURE CONTROL PLAN FOR JSC SPACE-FLIGHT HARDWARE |
|
API 574 REDLINE : 2009
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
|
API 945 : 2003 : R2008
|
AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS |
|
API 653 REDLINE : 2009
|
TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
|
API 580 : 2016
|
RISK-BASED INSPECTION |
|
API 572 REDLINE : 2009
|
INSPECTION PRACTICES FOR PRESSURE VESSELS |
|
NACE SP 02 94 : 2006
|
DESIGN, FABRICATION, AND INSPECTION OF STORAGE TANK SYSTEMS FOR CONCENTRATED FRESH AND PROCESS SULFURIC ACID AND OLEUM AT AMBIENT TEMPERATURES |
|
API 510 : 2014
|
PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
|
API TR 1PER15K-1 : 2013
|
PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
|
API 1160 : 2013
|
MANAGING SYSTEM INTEGRITY FOR HAZARDOUS LIQUID PIPELINES |
|
API 572 CHINESE : 2009
|
INSPECTION PRACTICES FOR PRESSURE VESSELS |
|
API 17G : 2006 : R2016
|
RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
|
API 574 CHINESE : 2009
|
INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
|
API TR 934-G : 2016
|
DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS |
|
API 17G:2006
|
RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
|
API TR 17TR8 : 2018
|
HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
|
UNI/TS 11325-8 : 2013
|
PRESSURE EQUIPMENT - PUTTING INTO SERVICE AND USE OF PRESSURE EQUIPMENT AND ASSEMBLIES - PART 8: PLANNING OF PRESSURE EQUIPMENT MAINTENANCE BY MEANS OF TECHNIQUES BASED ON RISK ASSESSMENT (RBI) |
|
API 581 : 2016
|
RISK-BASED INSPECTION METHODOLOGY |
|
S.R. CEN ISO TS 24817:2011
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
|
EN ISO 13704:2007/AC:2009
|
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES |
|
CEN/TR 15235:2005
|
Welding - Methods for assessing imperfections in metallic structures |