AS 1228-2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
18-12-2006
Specifies requirements for materials, design, construction, inspection and testing boilers as defined in AS/NZS 1200. It specifically applies to the design and construction of boilers, including superheaters, reheaters and economizers. Guidance is also provided regarding locomotive and other heritage boilers, and the design of blowdown vessels.
This Standard sets out requirements for materials, design, construction, inspection and testing of boilers as defined in AS/NZS 1200.NOTE: The Scope of this Standard covers requirements for cast iron in addition to welded boilers inclusive of vapour-generating and hot fluid units subject to internal vapour or liquid pressure. Other forms of construction should be by agreement between the parties concerned.This Standard specifically applies to the design and construction of boilers including superheaters, reheaters and economizers.It also applies to all pressure parts containing fluid up to and including the valves separating the pressure parts from - (a) steam piping to and from other equipment;(b) water piping to and from other equipment;(c) drain piping;(d) the surrounding atmosphere, except that for safety valves, their vent piping to the atmosphere is also covered; and(e) for equipment such as reheaters which may not incorporate valves at their supply and return connection points, the Standard applies to the equipment included between the inlet to the inlet header and the outlet from the outlet header of such equipment.This Standard also provides guidance on locomotive and other heritage boilers, and on the design of blowdown vessels.
Committee |
ME-001
|
DocumentType |
Standard
|
ISBN |
0 7337 7907 7
|
Pages |
268
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
First published in Australia in part as AS B31-1931.AS CB1 first published 1932.Redated 1932.Redated 1939.Second edition 1942.Redated 1950.AS CB1.5 first published 1951.AS CB1-1950 redated 1952.AS B31-1931 incorporated into AS CB1-1952 as Amendment.AS CB1-1952 redated 1954.AS CB1.5-1951 redated 1954.AS CB1-1954 revised and redesignated in part as AS CB1.1-1962 and AS 1228-1972.AS CB1.5-1954 revised and redesignated in part as AS 1228-1972.AS CB1.1-1962 revised and redesignated as AS 1797-1975 and AS 1797-1978.Second edition AS 1228-1980.Third edition AS 1797-1981.Third edition AS 1228-1984.Fourth edition AS 1797-1986.Fourth edition AS 1228-1990.AS 1797-1986 and AS 1228-1990 revised, amagamated and designated AS 1228-1997.Sixth edition 2006. Originated as part of AS CB1-1932. Previous edition AS 1228-1997. Sixth edition 2006.
AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature |
AS 2291-2007 | Metallic materials - Tensile testing at elevated temperatures |
AS 1732-1997 | Fusible plugs for boilers |
AS 1110.1-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Bolts |
AS 1112.3-2000 | ISO metric hexagon nuts - Product grade C |
AS/NZS 4481:1997 | Pressure equipment - Competencies of inspectors (Reconfirmed 2016) |
AS 4458-1997 | Pressure equipment - Manufacture (Reconfirmed 2016) |
AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS 60947.4.2-2004 | Low-voltage switchgear and controlgear Contactors and motor-starters - A.C. semiconductor motor controllers and starters |
AS 4037-1999 | Pressure equipment - Examination and testing (Reconfirmed 2016) |
AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 3998-2006 | Non-destructive testing - Qualification and certification of personnel |
AS 1271-2003 | Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels (Reconfirmed 2016) |
AS 1170.4 SUPP 1-1993 | Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads - Commentary (Supplement to AS 1170.4-1993) |
AS 1112.2-2000 | ISO metric hexagon nuts Style 2 - Product grades A and B |
AS/NZS 1200:2000 | Pressure equipment |
AS 1170.4-2007 | Structural design actions Earthquake actions in Australia (Reconfirmed 2018) |
AS 1210-1997 | Pressure vessels |
AS 3920.1-1993 | Assurance of product quality Pressure equipment manufacture |
AS 1112.4-2000 | ISO metric hexagon nuts Chamfered thin nuts - Product grades A and B |
AS 2528-1982 | Bolts, studbolts and nuts for flanges and other high and low temperature applications |
AS 60947.4.1-2004 | Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters |
AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS 1391-2005 | Metallic materials - Tensile testing at ambient temperature |
AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
AS/NZS 1170.2:2002 | Structural design actions Wind actions |
AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
AS 2074-2003 | Cast steels |
AS 2593-2004 | Boilers - Safety management and supervision systems (Reconfirmed 2016) |
AS/NZS 3992:1998 | Pressure equipment - Welding and brazing qualification |
AS 1210 SUPP 1-1990 | Unfired Pressure Vessels - Advanced design and construction (Supplement to AS 1210-1997) |
AS 3892-2001 | Pressure equipment - Installation (Reconfirmed 2016) |
AS/NZS 3679.2:1996 | Structural steel - Welded I sections |
AS 3990-1993 | Mechanical equipment - Steelwork (Reconfirmed 2016) |
AS 1710-2007 | Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate and universal sections - Test methods and quality classification (Reconfirmed 2017) |
AS/NZS 3679.1:1996 | Structural steel Hot-rolled bars and sections |
AS 1170.4-1993 | Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads |
AS 1112.1-2000 | ISO metric hexagon nuts Style 1 - Product grades A and B |
AS 4942-2001 | Pressure equipment - Glossary of terms (Reconfirmed 2016) |
AS 2291-1979 | Methods for tensile testing of metals at elevated temperatures |
AS/NZS ISO 17020:2000 | General criteria for the operation of various types of bodies performing inspection |
AS ISO 1000-1998 | The international system of units (SI) and its application |
AS 1110.2-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Screws |
AS 3873-2001 | Pressure equipment - Operation and maintenance |
AS 1710-1986 | Non-destructive testing - Ultrasonic testing of carbon and low alloy steel plate - Test methods and quality classification |
AS 1548-1995 | Steel plates for pressure equipment |
AS/NZS ISO 3834.1:1999 | Quality requirements for welding - Fusion welding of metallic materials Guidelines for selection and use |
AS/NZS 1596:2002 | The storage and handling of LP Gas |
AS 1470-1986 | Health and safety at work - Principles and practices |
AS/NZS 3992:1998 | Pressure equipment - Welding and brazing qualification |
AS 2593-2004 | Boilers - Safety management and supervision systems (Reconfirmed 2016) |
AS 3892-2001 | Pressure equipment - Installation (Reconfirmed 2016) |
AS 3961-2005 | The storage and handling of liquefied natural gas |
AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
AS 1210-2010 | Pressure vessels (Reconfirmed 2021) |
AS/NZS 1200:2000 | Pressure equipment |
AS 2865-2009 | Confined spaces |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS 4037-1999 | Pressure equipment - Examination and testing (Reconfirmed 2016) |
AS/NZS 2865:2001 | Safe working in a confined space |
AS 3873-2001 | Pressure equipment - Operation and maintenance |
AS 3533.2-2009 | Amusement rides and devices Operation and maintenance |
AS 3920.1-1993 | Assurance of product quality Pressure equipment manufacture |
AS 3533.1-2009 | Amusement rides and devices Design and construction |
AS/NZS 3788:2006 | Pressure equipment - In-service inspection (Reconfirmed 2017) |
AS/NZS 1596:2008 | The storage and handling of LP Gas |
AS 3857-1999 | Heat exchangers - Tubeplates - Method of design (Reconfirmed 2016) |
AS 1210-1997 | Pressure vessels |
AS 2780-2003 | Refractories and refractory materials - Glossary of terms (Reconfirmed 2013) |
AS/NZS 1596:2014 | The storage and handling of LP Gas |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.