Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 1259.1-1990

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Acoustics - Sound level meters Non-integrating
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

01-01-1990

Preview

1 - AS 1259.1-1990 SOUND LEVEL METERS - NON-INTEGRATING
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE.
6 - 2 REFERENCED DOCUMENTS.
6 - 3 DEFINITIONS.
6 - 3.1 Weighted sound pressure level
6 - 3.2 Crest factor
6 - 3.3 Primary indicator range
6 - 3.4 Level linearity
6 - 3.5 Reference direction
6 - 3.6 Reference frequency
6 - 3.7 Reference sound pressure level
6 - 3.8 Reference range
6 - 3.9 Tone burst
7 - 4 DESIGNATION.
7 - 4.1 Types.
7 - 4.2 Tolerances.
7 - 4.3 Weighting characteristics.
7 - 4.3.1 Frequency weighting.
7 - 4.3.2 Time weighting.
7 - 4.4 Optional features.
7 - 5 GENERAL CHARACTERISTICS OF SOUND LEVEL METERS.
7 - 5.1 General.
7 - 5.2 Accuracy and calibration.
8 - 5.3 Directional characteristics.
8 - 5.4 Frequency weighting.
8 - 5.5 Time weighting.
8 - 5.6 Sensitivity to various environments.
8 - 5.7 Means for substitution of electrical signal.
8 - 5.8 Means for checking battery voltage.
8 - 5.9 Maximum change of reading during operation.
8 - 6 DIRECTIONAL CHARACTERISTICS OF THE MICROPHONE AND INSTRUMENT CASE.
8 - 7 FREQUENCY- WEIGHTING AND AMPLIFIER CHARACTERISTICS.
8 - 7.1 General.
8 - 7.2 Manual level range control.
8 - 7.3 Crest factor capacity.
12 - 7.4 Inherent weighted system noise level.
12 - 7.5 Total harmonic distortion.
12 - 7.6 Adjustable range controls.
12 - 7.7 Non-linear distortion.
12 - 8 DETECTOR AND INDICATOR CHARACTERISTICS.
12 - 8.1 General.
12 - 8.2 F and S Characteristics.
12 - 8.3 I Characteristics.
14 - 8.4 Indication accuracy.
14 - 8.5 P Characteristics.
14 - 8.6 Indicator range.
14 - 8.7 Indicator scale.
14 - 8.8 Digital indicator display.
14 - 8.9 Detector-indicator linearity.
14 - 8.10 Differential level linearity.
14 - 9 SENSITIVITY TO VARIOUS ENVIRONMENTS.
14 - 9.1 General.
14 - 9.2 Static pressure.
14 - 9.3 Sound fields (microphone removed).
14 - 9.4 Mechanical vibrations.
16 - 9.5 Magnetic and electric fields.
16 - 9.6 Temperature.
16 - 9.7 Humidity.
16 - 10 CALIBRATION AND CHECKS OF THE BASIC CHARACTERISTICS OF SOUND LEVEL METERS.
16 - 10.1 General.
16 - 10.2 Complete meter.
16 - 10.2.1 General.
17 - 10.2.2 Absolute sensitivity.
17 - 10.2.3 Frequency weighting.
17 - 10.2.4 Directivity.
17 - 10.3 Amplifier characteristics.
17 - 10.3.1 General.
17 - 10.3.2 Overload indications.
17 - 10.3.3 Accuracy of level range control.
17 - 10.3.4 Inherent weighted system noise level.
17 - 10.4 Detector and indicator characteristics.
17 - 10.4.1 General.
17 - 10.4.2 Time-weighting characteristics F and S.
18 - 10.4.3 Time-weighting characteristic I.
18 - 10.4.4 Time-weighting characteristic P.
18 - 10.4.5 R.M.S. performance.
19 - 11 PROVISION FOR USE WITH AUXILIARY EQUIPMENT.
19 - 12 RATING INFORMATION AND INSTRUCTION MANUAL.
19 - 12.1 Marking.
19 - 12.2 Instruction Manual.
21 - APPENDIX A - SPECIFICATIONS OF THE A, B, C AND D FREQUENCY WEIGHTING FUNCTIONS
21 - A1 POLE-ZERO SPECIFICATIONS.
21 - A2 EXPLICIT EQUATIONS FOR THE WEIGHTING FUNCTIONS FOR COMPUTATION.
26 - APPENDIX B - TESTS OF THE OVERLOAD AND DETECTION CHARACTERISTICS
26 - B1 GENERAL.
26 - B2 RECTANGULAR PULSE TEST.
26 - B3 TONE BURST TEST.
27 - APPENDIX C - DIFFUSE FIELD SENSITIVITY
27 - APPENDIX D - THEORETICAL RESPONSE TO TONE BURSTS
28 - ANNEX - DEVIATIONS FROM IEC 651–1979, SOUND LEVEL METERS

Provides for four types of meter, viz. Types 0 and 1 for laboratory and precision use, Type 2 for general field applications, and Type 3 for field noise survey applications, with one or more frequency-weighting characteristics A, B and C and one or more time-weighting characteristics S, F, I and P. Specifies the directional frequency-weighting and amplifier, time-weighting, detector and indicator characteristics, and sensitivity to various environments, and includes electrical and acoustical tests. Is technically equivalent to IEC 651 and includes an annex showing deviations from IEC 651.

This Standard specifies requirements for sound level meters for the measurement of certain frequency-weighted and time-weighted sound pressure levels. This Standard specifies the following characteristics of sound level meters: (a) Directional characteristics.(b) Frequency-weighting characteristics.(c) Time-weighting, detector and indicator characteristics. (d) Sensitivity to various environments.It also sets out electrical and acoustical procedures to verify compliance with the characteristics specified and describes the method for absolute sensitivity calibration.

Committee
AV-002
DocumentType
Standard
ISBN
0 7262 6151 3
Pages
23
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

Standards Relationship
IEC 60651:1979 Identical
IEC 60537:1976 Identical

AS 1633-1985 Acoustics - Glossary of terms and related symbols
AS 2659.1-1988 Guide to the use of sound measuring equipment - Portable sound level meters
AS 2533-2002 Acoustics - Preferred frequencies and band centre frequencies

AS/NZS 4476:1997 Acoustics - Octave-band and fractional-octave-band-filters
AS/NZS 1269.1:2005 Occupational noise management Measurement and assessment of noise immission and exposure (Reconfirmed 2016)
AS/NZS 1269.1:1998 Occupational noise management - Measurement and assessment of noise immission and exposure
AS 3200.2.20-1992 Approval and test specification - Medical electrical equipment Particular requirements for safety - Baby incubators (transport)
AS 2938-1993 Gears - Spur and helical - Guide to specification and rating
AS/NZS 3200.2.200:2005 Medical electrical equipment Particular requirements for safety - Oxygen concentrators for individual patient use
AS 1259.2-1990 Acoustics - Sound level meters Integrating - Averaging
AS 2243.5-1993 Safety in laboratories - Non-ionizing radiations
AS 1191-2002 Acoustics - Method for laboratory measurement of airborne sound transmission insulation of building elements (Reconfirmed 2016)
AS 2991.2-1991 Acoustics - Method for the determination of airborne noise emitted by household and similar electrical appliances Particular requirements for dishwashers
AS/NZS 3200.2.16:1999 Medical electrical equipment Particular requirements for safety - Haemodialysis, haemodiafiltration and haemofiltration equipment
AS 3871.5-1994 Magnetic tape sound recording and reproducing systems - Electrical magnetic tape properties
AS 2021-2000 Acoustics - Aircraft noise intrusion - Building siting and construction
AS 61010.1-2003 Safety requirements for electrical equipment for measurement, control and laboratory use General requirements (IEC 61010-1:2001, MOD) (Reconfirmed 2016)
AS/NZS 1716:1994 Respiratory protective devices
AS 2374.6-1994 Power transformers - Determination of transformer and reactor sound levels
AS/NZS 1716:2003 Respiratory protective devices
AS 2120.1-1992 Medical suction equipment Electrically-powered suction equipment Safety requirements
AS 2362.22-2002 Fire detection, warning, control and intercom systems Methods of test - Sound pressure level test (Reconfirmed 2016)
AS 2263-1995 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
AS/NZS 3200.2.24:1999 Medical electrical equipment Particular requirements for safety - Infusion pumps and controllers
AS/NZS 3749.1:1997 Intruder alarm systems - Road vehicles - Performance requirements
AS/NZS 1269.4:2005 Occupational noise management Auditory assessment
AS 2353-1999 Pedestrian push-button assemblies
AS 1284.1-1991 Electricity metering General purpose induction watthour meters
AS 2913-2000 Evaporative airconditioning equipment (Reconfirmed 2016)
AS 1807.0-2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test List of methods and apparatus
AS 1735.12-1999 Lifts, escalators and moving walks Facilities for persons with disabilities
AS/NZS 3200.2.33:1996 Approval and test specification - Medical electrical equipment Particular requirements for safety - Magnetic resonance equipment for medical diagnosis
AS 3871.3-1994 Magnetic tape sound recording and reproducing systems Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
AS 2436-1981 Guide to noise control on construction, maintenance and demolition sites
AS/NZS 2243.5:2004 Safety in laboratories Non-ionizing radiations - Electromagnetic, sound and ultrasound
AS 1647.2-1992 Children’s toys (Safety requirements) Constructional requirements
AS 1284.1-2004 Electricity metering General purpose induction watthour meters (Reconfirmed 2019)
AS 2363-1999 Acoustics - Measurement of noise from helicopter operations
AS 1055.1-1997 Acoustics - Description and measurement of environmental noise General procedures
AS 2021-1994 Acoustics - Aircraft noise intrusion - Building siting and construction
AS/NZS 3749.1:2003 Intruder alarm systems - Road vehicles Performance requirements
AS/NZS 2460:2002 Acoustics - Measurement of the reverberation time in rooms (Reconfirmed 2016)
AS 1670.4-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning Sound systems and intercom systems for emergency purposes
AS/NZS 1269.4:2014 Occupational noise management Auditory assessment
AS 3200.2.19-1992 Approval and test specification - Medical electrical equipment Particular requirements for safety - Baby incubators (nursing)
AS 2012.2-1990 Acoustics - Measurement of airborne noise emitted by earth-moving machinery and agricultural tractors - Stationary test condition Operator’s position
AS 3782.1-1990 Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment General considerations and definitions
AS/NZS 2399:1998 Acoustics - Specifications for personal sound exposure meters
AS/NZS 2107:2000 Acoustics - Recommended design sound levels and reverberation times for building interiors
AS/NZS 1269.4:1998 Occupational noise management - Auditory assessment
AS 2012.1-1990 Acoustics - Measurement of airborne noise emitted by earth-moving machinery and agricultural tractors - Stationary test condition Determination of compliance with limits for exterior noise
AS 4241-1994 Acoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones
AS 2377-2002 Acoustics - Methods for the measurement of railbound vehicle noise
AS 1670.1-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning Fire
AS/NZS 3200.2.21:1994 Approval and test specification - Medical electrical equipment - Particular requirements for safety - Infant radiant warmers

View more information
$113.50
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more