AS 1449-1994

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip

Publisher: Standards Australia

Published:

Available Formats: PDF 9 Users - English, PDF 5 Users - English, PDF 3 Users - English, PDF 1 User - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

1 - AS 1449-1994 WROUGHT ALLOY STEELS - STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET AND STRIP
4 - PREFACE
5 - CONTENTS
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
7 - 3 DEFINITIONS
7 - 3.1 Camber
7 - 3.2 Parcel
7 - 3.3 Plate
7 - 3.4 Sheet
7 - 3.5 Strip
7 - 3.6 Test batch
7 - 3.7 Test piece
7 - 3.8 Test sample
7 - 3.9 Test specimen
7 - 4 DESIGNATION OF GRADE
7 - 4.1 General
8 - 4.2 Series designation
8 - 4.3 Modification symbols
8 - 4.4 Example of grade designation
8 - 4.5 Surface finish designation
8 - 5 CONDITION OF STEEL ON DELIVERY
8 - 5.1 General
8 - 5.2 Surface finish
9 - 5.3 Edges
9 - 6 CHEMICAL COMPOSITION
9 - 6.1 General
9 - 6.2 Cast analysis
9 - 6.3 Residual elements
9 - 6.4 Product analysis
9 - 7 FREEDOM FROM DEFECTS
9 - 8 MECHANICAL PROPERTIES
9 - 9 MECHANICAL TESTS
9 - 9.1 Selection and preparation of test samples
10 - 9.2 Tensile test
10 - 9.3 Single bend test
10 - 9.4 Hardness test
10 - 10 INTERGRANULAR CORROSION TEST FOR AUSTENITIC STAINLESS STEELS
10 - 10.1 General
10 - 10.2 Condition of test pieces
10 - 11 MANUFACTURING TOLERANCES
11 - 12 ROUNDING OF TEST RESULT VALUES
11 - 12.1 General
11 - 12.2 Tensile test results
11 - 13 MARKING
23 - APPENDIX A - PURCHASING GUIDELINES
23 - A1 GENERAL
23 - A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
24 - APPENDIX B - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
24 - B1 SCOPE
24 - B2 STATISTICAL SAMPLING
24 - B3 PRODUCT CERTIFICATION
24 - B4 SUPPLIER’S QUALITY SYSTEM
25 - B5 OTHER MEANS OF ASSESSMENT
25 - B5.1 General
25 - B5.2 Retesting
26 - APPENDIX C - SURFACE FINISHES AVAILABLE FOR ROLLED STAINLESS AND HEAT-RESISTING STEELS
26 - C1 SCOPE
26 - C2 SURFACE FINISHES
28 - APPENDIX D - TYPICAL MECHANICAL PROPERTIES OF STEEL IN THE SOFTENED CONDITION FOR GRADES LISTED IN TABLE 7

Abstract - (Show below) - (Hide below)

Specifies requirements for stainless and heat-resisting steel grades for general engineering purposes which, with the exception of grade 301, are supplied in the softened condition as plates or as cold-rolled and annealed sheet and strip, in coils or cut lengths. The Standard specifies and gives information on seven standard surface finishes available for rolled products.

Scope - (Show below) - (Hide below)

This Standard specifies requirements for stainless and heat-resisting steels for general engineering purposes which, with the exception of grade 301, are supplied in the softened condition as plates or as cold-rolled and annealed sheet and strip, in coils or cut lengths.NOTES:1 Advice and recommendations on information to be supplied by the purchaser at the time of inquiry and order are contained in the purchasing guidelines set out in Appendix A.2 Alternative means for determining compliance with this Standard are given in Appendix B.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Withdrawn
Publisher	Standards Australia
Pages
ISBN
Committee	MT-001
Supersedes	AS 1449-1980 DR 92181

History - (Show below) - (Hide below)

First published as AS G31-1971.
Revised and redesignated AS 1449-1978.
Second edition 1980.
Third edition 1994.

Standards Referenced By This Book - (Show below) - (Hide below)

AS 2505.1-1981	Methods for bend and related testing of metals Sheet, strip and plate
AS 1399-1990	Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 2338-1980	Preferred dimensions of wrought metal products
AS 1815-1991	Metallic materials - Rockwell hardness test
AS 1050.12-1983 (R2016)	Methods for the analysis of iron and steel Determination of nitrogen in steel (steam distillation titrimetric method)
AS 1399-1990	Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 1391-1991	Methods for tensile testing of metals
AS 2706-1984	Numerical values - Rounding and interpretation of limiting values
AS 1213-1982	Iron and steel - Methods of sampling
AS 1817-1991	Metallic materials - Vickers hardness test
AS 2038-1977	Methods for detecting the susceptibility of austenitic stainless steels to intergranular corrosion
AS 1627.5-1994	Metal finishing - Preparation and pretreatment of surfaces Pickling, descaling and oxide removal
AS 1816-1990	Metallic materials - Brinell hardness test
AS 3900.1-1987	Quality management and quality assurance Standards Guidelines for selection and use
AS 3904.1-1987	Quality management and quality system elements Guidelines
AS K1.16-1961	Methods for the sampling and analysis of iron and steel Determination of sulphur in steel (gravimetric method)
AS 1199-1988	Sampling procedures and tables for inspection by attributes

Standards Referencing This Book - (Show below) - (Hide below)

AS/NZS 3813:1998	Plastic monobloc chairs
AS 1019-2000	Internal combustion engines - Spark emission control devices
AS 4260-1997 (R2018)	High efficiency particulate air (HEPA) filters - Classification, construction and performance
AS/NZS 3982:1996	Urinals
AS/NZS 2485:1995	Medical equipment - Single-use winged intravenous devices (sterile) for general medical use
AS 4087-1993	Metallic flanges for waterworks purposes
AS 2336-1992	Meat industry - Hand-held knives
AS 4254-2002	Ductwork for air-handling systems in buildings
HB 39-1997	Installation code for metal roof and wall cladding
DR 01195 CP	Laundry troughs and tubs
AS 3982-1991	Urinals
AS 2809.2-1999	Road tank vehicles for dangerous goods Tankers for flammable liquids
AS 1741-1991 (R2018)	Vitrified clay pipes and fittings with flexible joints - Sewer quality
AS 4554-2002 (AG 104-2002)	Gas laundry dryers
AS 2774-1985	Drying cabinets for respiratory apparatus
AS 1803-1998	General purpose detergents for use in the dairying industry
AS/NZS 1906.1:1993	Retroreflective materials and devices for road traffic control purposes Retroreflective materials
AS/NZS 1546.1:1998	On-site domestic wastewater treatment units Septic tanks
AS 2192-2002	Sterilizers - Steam - Downward-displacement
AS 1172.1-1993	Water closets of 6/3 L capacity Pans
AS 2809.5-2001	Road tank vehicles for dangerous goods Tankers for bitumen-based products
AS 1628-1994	Water supply - Copper alloy gate, globe and non-return valves
AS 2396-1980	Performance of household food waste disposal units
AS 2192-1991	Sterilizers - Steam - Downward displacement
AS 3700-2001	Masonry structures
AS/NZS 2023:1995	Baths for ablutionary purposes
AS 2182-1998	Sterilizers - Steam - Benchtop
AS/NZS 1229:1997	Laundry troughs and tubs
AS 4773.1-2010	Masonry in small buildings Design
AS 3660-1993	Protection of buildings from subterranean termites - Prevention, detection and treatment of infestation
AS/NZS 4327:1995	Metal-banded flexible couplings for low-pressure applications
AS 4260.1(Int)-1994	High efficiency particulate air (HEPA) filters Performance and construction
AS 2773.1-1998	Ultrasonic cleaners for health care facilities Non-portable
AS 3494-1997	Bidettes and bidets
AS 3495-1997 (R2018)	Authorization requirements for plumbing products - Stainless steel non-pressure pipes and fittings
AS 3500.4-1994	National Plumbing and Drainage Code Hot water supply systems
AS 1398-1998	Iodophors for use in the dairying industry
AS 1549-1983	Performance of household electrical appliances - Ranges, built-in cooking tops and wall-mounted ovens
AS 2945-1987	Washer/disinfectors for hospital utensils
AS 1682.1-1990	Fire dampers Specification
AS 3718-1992	Water supply - Metal-bodied taps - Specified by performance
AS 4326-1995	The storage and handling of oxidizing agents
AS 1562.1-1992 (R2016)	Design and installation of sheet roof and wall cladding Metal
AS/NZS 4496:1997 (R2016)	Recommended practice for the colour coding of steel products
AS 3836-1998	Rack conveyor washers for health care facilities
AS 2182-1994	Sterilizers - Steam - Portable
AS 1768-1991	Lightning protection
AS/NZS 3500.5:2000	National Plumbing and Drainage Domestic installations
AS 2047.1-1996	Windows in buildings Specification for materials and performance
AS 2487-2002	Dry heat sterilizers
AS 3993.1-1992	Equipment for the pasteurization of milk and other liquid dairy products Continuous-flow systems
AS 2047-1999	Windows in buildings - Selection and installation
AS 4254-1995	Ductwork for air-handling systems in buildings
AS 3700-1998	Masonry structures
AS/NZS 1400:1997	Heavy-duty alkaline detergents for 'in-place' cleaning in dairy factories
AS 2712-1993	Solar water heaters - Design and construction
AS 2469-1998	Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg
AS 2339-1997	Traffic signal posts and attachments
AS/NZS 1553.3:1996	Covered electrodes for welding Corrosion-resisting chromium and chromium-nickel steel electrodes
AS 1056.3-1991	Storage water heaters Specific requirements for water heaters with composite shells
AS 1056.2-1985	Storage water heaters Specific requirements for water heaters with single shells
AS 3583.4-1991 (R2016)	Methods of test for supplementary cementitious materials for use with portland cement Determination of autoclave expansion
AS 1553.3-1992	Covered electrodes for welding Corrosion-resisting chromium and chromium-nickel steel electrodes
AS 4285-1995	Skylights
AS 2470-1998	Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg
AS 3952-1991	Water supply - DN 80 spring hydrant valve for general purposes
AS/NZS 3500.2.2:1996	National Plumbing and Drainage - Sanitary plumbing and drainage - Acceptable solutions
AS 3660.1-1995	Protection of buildings from subterranean termites New buildings
AS 1187-1996	Farm milk cooling and storage systems
AS 2243.8-1992	Safety in laboratories Fume cupboards
AS/NZS 2785:2000	Suspended ceilings - Design and installation
AS 2514-1999	Drying cabinets for medical equipment
AS 4181-1994	Stainless steel clamps for waterworks purposes
AS/NZS 1389:1997	Acidic detergents for use in the dairying industry
AS 3588-1996 (R2016)	Shower bases and shower modules
AS 3500.1-1992	National Plumbing and Drainage Code Water supply
AS 2809.4-2001	Road tank vehicles for dangerous goods Tankers for toxic and corrosive cargoes
AS 3660.1-2000	Termite management New building work
AS 3695-1992	Wheelchairs - Product requirements
AS/NZS 3500.1.2:1998	National plumbing and drainage Water supply - Acceptable solutions
AS 2945(Int)-2002	Batch-type washer/disinfectors for health care facilities
AS 2089-1993	Sheave blocks for lifting purposes
AS/NZS 4673:2001	Cold-formed stainless steel structures
AS/NZS 1229:2002 (R2017)	Laundry troughs and tubs
AS 2437-1987	Flusher/sanitizers for bed pans and urine bottles
AS 4087-1996	Metallic flanges for waterworks purposes
AS/NZS 3500.4.2:1997	National Plumbing and Drainage Hot water supply systems - Acceptable solutions
AS/NZS 2699.2:2000	Built-in components for masonry construction, Connectors and accessories
AS/NZS 2179.1:1994	Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners
AS 2711-1993	Washer/disinfectors for respiratory apparatus
AS/NZS 2312:1994	Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 2062-1997	Non-destructive testing - Penetrant testing of products and components
AS 1229-1991	Laundry troughs
AS 1138-1992	Thimbles for wire rope
AS/NZS 1730:1996	Washbasins
AS/NZS 2699.3:2000	Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 3864-1997	Medical refrigeration equipment - For the storage of blood and blood products
AS 1410-2003	Sterilizers - Steam - Pre-vacuum
AS/NZS 3718:1997	Water supply - Metal-bodied taps - Specified by performance
AS 4032.1-2005	Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
AS/NZS 3509:1996	LP gas fuel vessels for automotive use
AS/NZS 2699.1:2000	Built-in components for masonry construction Wall ties
AS 2050:2018	Installation of roof tiles
AS 4563-2003 (AG 300-2003)	Commercial catering gas equipment

Add To Cart

Product Format

Quantity

add to cart

AS 1449-1994

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

Scope - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

History - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?