Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS 1910-2004

Current
Current

The latest, up-to-date edition.

Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

07-07-2004

Preview

This Standard specifies requirements for active float control valves for use in water supply systems where the normal working temperature does not exceed 95°C and the continuous working pressure extends up to a maximum of 1.4 MPa for a range of nominal sizes from DN 6 to DN 80.

This Standard specifies requirements for active float control valves for use in water supply systems where the normal working temperature does not exceed 95°C and the continuous working pressure extends up to a maximum of 1.4 MPa for a range of nominal sizes from DN 6 to DN 80.This Standard does not cover WC cistern flushing valves.NOTE: WC cistern flushing valves are covered in all parts of AS 1172. Means of demonstrating compliance with this Standard are set out in Appendix A.

Committee
WS-001
DocumentType
Standard
ISBN
0 7337 6073 2
Pages
17
ProductNote
Reconfirmed 03/06/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 03/06/2016
PublisherName
Standards Australia
Status
Current
Supersedes
UnderRevision

First published as AS 1910-1976.Second edition 1994.Third edition 2004.Reconfirmed 2016. Originated as AS 1910-1976. Previous edition AS 1910-1994. Third edition 2004. Reissued incorporating Amendment No. 1 (July 2006).

AS 3558.17-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of shower bases and shower modules
AS 3558.7-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of laundry troughs (Reconfirmed 2016)
AS 3558.5-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of degradation by ultraviolet light (Reconfirmed 2016)
AS 3558.13-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal distortion of baths for ablutionary purposes
AS 2136-1977 Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018)
AS 1881-1986 ZINC ALLOYS - CASTING INGOTS AND CASTINGS - QUALITY REQUIREMENTS (Reconfirmed 2018)
AS 1167.1-1993 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 3558.22-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal distortion of sinks (Reconfirmed 2016)
AS 3558.4-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to surface scratching (Reconfirmed 2016)
AS/NZS 1568:1998 Copper and copper alloys - Forging stock and forgings
AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
AS 3558.24-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to hot liquids of the surface of sinks
AS 2738-2000 Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018)
AS 3558.10-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal expansion under load of laundry troughs
AS 3688-1994 Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
AS 3558.6-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Visual examination of surface finish for defects (Reconfirmed 2016)
AS 2345-2006 Dezincification resistance of copper alloys
AS 3558.9-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal distortion of laundry troughs (Reconfirmed 2016)
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS 3558.3-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of colour fastness
AS/NZS 4020:2002 Testing of products for use in contact with drinking water
AS 3558.23-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to heat of the surface of sinks
AS 1572-1998 Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018)
AS 3558.20-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of sinks
AS 3558.2-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of chemical and stain resistance
AS 1172.2-1999 Water closet (WC) pans of 6/3 L capacity or proven equivalent - Cisterns
AS 1722.2-1992 Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017)
AS 1565-1996 Copper and copper alloys - Ingots and castings (Reconfirmed 2020)
AS 3558.1-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of water absorption characteristics
AS 2345-1992 Dezincification resistance of copper alloys
AS 2074-2003 Cast steels
AS 1567-1985 Copper and copper alloys - Wrought rods, bars and sections
AS 3688-2005 Water supply - Metallic fittings and end connectors
AS 1172.1-1993 Water closets of 6/3 L capacity - Pans
AS 3558.12-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of baths for ablutionary purposes (Reconfirmed 2016)
AS 1172-1989 Water closet pans
AS 3558.18-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of shower bases and shower modules
AS 3558.15-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of washbasins
AS 3558.19-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of sinks (Reconfirmed 2016)
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS 3558.16-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of washbasins
AS 1722.1-1975 Pipe threads of Whitworth form Sealing pipe threads (metric units)
AS 1568-1985 Copper and copper alloys - Forging stock and forgings
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS/NZS 1167.1:2005 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS 3558.21-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal expansion under load of sinks (Reconfirmed 2016)
AS 3558.14-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal expansion under load of baths for ablutionary purposes
AS/NZS 1567:1997 Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021)
AS 3558.8-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of laundry troughs
AS 3558.0-1989 Methods of testing plastics and composite materials sanitary plumbing fixtures Introduction and list of methods
AS 3558.11-1999 Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of baths for ablutionary purposes
AS 1834.1-1991 Material for soldering Solder alloys (Reconfirmed 2018)

AS/NZS 3500.4:2015 Plumbing and drainage Heated water services
AS 5200.000-2006 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018)
AS/NZS 3500.4:2003 Plumbing and drainage Heated water services
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS 1361-1995 Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016)
AS 5200.000-2005 Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products
AS/NZS 3500.4:2018 Plumbing and drainage Heated water services

View more information
$113.50
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more