Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 1477:2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PVC pipes and fittings for pressure applications
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

30-06-2017

Published date

13-09-2006

Preview

Specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct sunlight.

This Standard specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct sunlight.NOTES:Pipes and fittings manufactured to this Standard should be used and installed only in accordance with AS/NZS 2032 and AS/NZS 2566.1, as applicable.

Committee
PL-021
DocumentType
Standard
ISBN
0 7337 7702 3
Pages
29
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published in Australia in part as AS K138-1963.Second edition 1967.Third edition 1969.AS A159 first published 1969.AS A160 first published 1969.Second edition AS A159-1971.AS A159-1971 and part of AS A160-1969 revised, amalgamated and redesignated AS 1477.2-1973.AS K138-1969 revised and redesignated as AS 1477.1-1973.AS 1477.4 first published 1973.AS 1477.6 first published 1973.Second edition AS 1477.1-1988.Second edition AS 1477.4-1988.AS 2977.1 first published 1988.AS 2977.2 first published 1988.AS 2977.3 first published 1988.Second edition AS 1477.6-1989.Second edition AS 1477.2-1990.First published in New Zealand as NZS 7648:1987.AS 1477.1-1988, AS 1477.2-1990, AS 1477.4-1988, AS 1477.6-1989, AS 2977.1-1988, AS 2977.2-1988, AS 2977.3-1989 and NZS 7648:1987 jointly revised and redesignated AS/NZS 1477:1996.Second edition 1999.Third edition 2006. Originated in Australia in part as AS K138-1963. Previous editions AS 1477.1-1988, AS 1477.2-1990, AS 1477.4-1988, AS 1477.6-1989, AS 2977.1-1988, AS 2977.2-1988 and AS 2977.3-1989. Originated in New Zealand as NZS 7648:1987. AS 1477.1-1988, AS 1477.2-1990, AS 1477.4-1988, AS 1477.6-1989, AS 2977.1-1988, AS 2977.2-1988, AS 2977.3-1989 and NZS 7648:1987 jointly revised and redesignated AS/NZS 1477:1996. Third edition 2006.

AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
AS/NZS 2566.1:1998 Buried flexible pipelines Structural design
AS/NZS 2032:2006 Installation of PVC pipe systems
AS/NZS 1462.3:1998 Methods of test for plastics pipes and fittings Method for determining the impact characteristics of pipes (Reconfirmed 2017)
AS/NZS 1462.11:1996 Methods of test for PVC pipes and fittings Method for high temperature stress-relief testing of fittings (Reconfirmed 2017)
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS/NZS 1462.8:1998 Methods of test for plastics pipes and fittings Method of test for infiltration
AS 1722.2-1992 Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017)
AS/NZS 2280:2004 Ductile iron pipes and fittings
AS 1462.9-1984 Methods of test for unplasticized PVC (UPVC) pipes and fittings Method of hydrostatic pressure testing of UPVC pressure fittings
AS/NZS 1462.1:2006 Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings
AS/NZS 3879:1995 Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings
AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
AS 2888.1-2002 Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form
AS/NZS 1462.20:1996 Methods of test for PVC pipes and fittings Method for the determination of long-term failure stress of PVC moulding compounds (Reconfirmed 2017)
AS/NZS 4020:2005 Testing of products for use in contact with drinking water
AS/NZS 2544:1995 Grey iron pressure fittings
AS 1722.1-1975 Pipe threads of Whitworth form Sealing pipe threads (metric units)
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS 1462.17-1988 Methods of test for unplasticized PVC (UPVC) pipes and fittings Method for testing pressure pipe joints with elastomeric seals
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS/NZS 1462.16:2006 Methods of test for plastics pipes and fittings Method for high temperature testing of pipe (Reconfirmed 2017)
AS/NZS 1462.6:1998 Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of pipes
AS/NZS 1462.19:2006 Methods of test for plastics pipes and fittings C-ring test for fracture toughness of PVC pipes (Reconfirmed 2017)
AS/NZS 1462.15:1996 Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content (Reconfirmed 2017)
AS/NZS 1462.4:2002 Methods of test for plastics pipes and fittings Method for determining reversion of plastics pipes (Reconfirmed 2017)

AS/NZS 3835.2:2006 Earth potential rise - Protection of telecommunications network users, personnel and plant Application guide
AS/NZS 1547:2012 On-site domestic wastewater management
AS 3571.2-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD)
AS 1735.17-1995 Lifts, escalators and moving walks Lifts for people with limited mobility - Restricted use - Water-drive
AS 2610.1-2007 Spa pools Public spas (Reconfirmed 2016)
AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications
AS 1926.3-2003 Swimming pool safety - Water recirculation systems
AS/NZS 3518:2013 Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications
AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
AS/NZS 4026:2001 Electric cables - For underground residential distribution systems
ATS 5200.055-2008 Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications
AS/NZS 1547:2000 On-site domestic wastewater management
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS/NZS 1260:2009 PVC-U pipes and fittings for drain, waste and vent application
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
MP 52-2005 Manual of authorization procedures for plumbing and drainage products
AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS/NZS 4793:2009 Mechanical tapping bands for waterworks purposes
AS 3634-1989 Solar heating systems for swimming pools (Reconfirmed 2013)
AS 2610.2-2007 Spa pools Private spas (Reconfirmed 2016)
AS 3861-1991 Spa baths (Reconfirmed 2016)
AS/NZS 2053.2:2001 Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016)
AS/NZS 1254:2002 PVC pipes and fittings for storm and surface water applications
AS 2698.3-1990 Plastics pipes and fittings for irrigation and rural applications Mechanical joint fittings for use with polyethylene micro-irrigation pipes (Reconfirmed 2017)
AS/NZS 5601.1:2013 Gas installations General installations
AS/NZS 3084:2017 Telecommunications installations - Telecommunications pathways and spaces for commercial buildings
AS 3571.1-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD)
AS/NZS 3707:2001 Method for testing pressure cycling resistance of pipes and fittings
AS/NZS 5601.1:2010 Gas installations General installations
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS 1589-2001 Copper and copper alloy waste fittings (Reconfirmed 2018)
AS 5830.2-2012 In-line ball valves for use in plumbing water supply systems Plastics-bodied
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
AS/NZS 3835.1:2006 Earth potential rise - Protection of telecommunications network users, personnel and plant Code of practice
AS 2419.1-2005 Fire hydrant installations System design, installation and commissioning

View more information
$135.16
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more