Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 2311:2009

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Guide to the painting of buildings
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

22-02-2023

Language(s)

English

Published date

23-03-2009

Preview

This Standard provides a guide to products and procedures for the painting of buildings for general domestic, commercial and industrial use.

This Standard provides a guide to products and procedures for the painting of buildings for general domestic, commercial and industrial use.The Standard does not include a specific recommendation for the long-term protection of iron or steel exposed directly to the atmosphere or to internal climates likely to have aggressive environments which are dealt with in AS/NZS 2312.

Committee
CH-003
DocumentType
Standard
ISBN
0 7337 9054 2
Pages
108
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published in Australia as AS 2311-1979.Second edition 1983.Third edition 1992.NZS 7703 first published in New Zealand in 1985.AS 2311-1992 and NZS 7703:1985 jointly revised, amalgamated and redesignated as AS/NZS 2311:2000.Fifth edition 2009. Originated in Australia as AS 2311 1979. Originated in New Zealand as NZS 7703 1985. Previous edition AS/NZS 2311:2000. Fifth edition 2009.

AS 3730.22-2006 Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS 3730.5-2006 Guide to the properties of paints forbuildings Solvent-borne - Interior - Semi-gloss (Reconfirmed 2016)
AS 3730.28-2006 Guide to the properties of paints for buildings Wood stain - Solvent-borne - Exterior
AS 3715-2002 Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys
AS 3730.27-2006 Guide to the properties of paints for buildings Clear coatings for interior timber floors
AS/NZS 3750.5:2008 Paints for steel structures Acrylic full gloss (two-pack) (Reconfirmed 2020)
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS 3730.29-2006 Guide to the properties of paints for buildings Solvent-borne - Exterior/interior - Paving paint (Reconfirmed 2016)
AS/NZS 3750.6:1995 Paints for steel structures - Full gloss polyurethane (two-pack)
AS/NZS 3750.17:1998 Paints for steel structures Etch primers (single pack and two-pack) (Reconfirmed 2013)
AS/NZS 2430.3.1:2004 Classification of hazardous areas Examples of area classification - General
AS/NZS 2865:2001 Safe working in a confined space
AS/NZS 2430.3.9:2004 Classification of hazardous areas Examples of area classification - Miscellaneous
AS/NZS 2430.3.3:2004 Classification of hazardous areas Examples of area classification - Flammable liquids
AS 3730.7-2006 Guide to the properties of paints for buildings Latex - Exterior - Flat
AS 3730.14-2006 Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior
AS 3730.1-2006 Guide to the properties of paints for buildings Latex - Interior - Flat (Reconfirmed 2016)
AS/NZS 1680.1:2006 Interior and workplace lighting General principles and recommendations
AS 1940-2004 The storage and handling of flammable and combustible liquids
AS 3750.10-2008 Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019)
AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS/NZS 1716:2003 Respiratory protective devices
AS 1604.1-2005 Specification for preservative treatment - Sawn and round timber
AS/NZS 4548.3:1999 Guide to long-life coatings for concrete and masonry Latex - Textured coatings - Non-aggregate (Reconfirmed 2013)
AS 3730.8-2006 Guide to the properties of paints for buildings Latex - Exterior - Low-gloss (Reconfirmed 2016)
AS 3730.6-2006 Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016)
AS 3730.25-2006 Guide to the properties of paints for buildings Clear finish - Solvent-borne - Interior (Reconfirmed 2016)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 3730.18-2006 Guide to the properties of paints for buildings Undercoat/sealer - Latex - Interior/exterior
AS 3730.12-2006 Guide to the properties of paints for buildings Latex - Interior - Gloss
AS 3730.0-2006 Guide to the properties of paints for buildings General information on the specification, purchasing and testing of paints
AS/NZS 4548.2:1999 Guide to long-life coatings for concrete and masonry Latex finish coatings - High-build, low profile (Reconfirmed 2013)
AS 1897-1976 Electroplated coatings on threaded components (metric coarse series)
AS 3730.16-2006 Guide to the properties of paints for buildings Latex - Self-priming timber finish - Exterior
AS 3730.15-2006 Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces
AS 4506-2005 Metal finishing - Thermoset powder coatings
AS/NZS 2430.3.6:2004 Classification of hazardous areas Examples of area classification - Laboratories, including fume cupboards and flammable medical agents
AS/NZS 2430.3.2:2004 Classification of hazardous areas - Examples of area classification - Vehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars
AS 3730.21-2006 Guide to the properties of paints for buildings Primer - Solvent-borne - For ferrous metallic surfaces
AS 1580.408.5-2006 Paints and related materials - Methods of test Adhesion - Pull-off test
AS 1345-1995 Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018)
AS 4361.2-1998 Guide to lead paint management Residential and commercial buildings
AS 3730.2-2006 Guide to the properties of paints for buildings Latex - Interior - Semi-gloss (Reconfirmed 2016)
AS/NZS 2430.3.7:2004 Classification of hazardous areas Examples of area classification - Landfill gas, sewage treatment and sewage pumping plants
AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release (Reconfirmed 2016)
AS 1580.401.5-2002 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.408.2-2004 Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019)
AS/NZS 4548.4:1999 Guide to long-life coatings for concrete and masonry Latex - Textured coatings - Aggregate-filled
HB 84-2006 Guide to Concrete Repair and Protection
AS 1580.408.4-2004 Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019)
AS 1318-1985 Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code)
AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
AS/NZS 4548.1:1999 Guide to long-life coatings for concrete and masonry Wall coatings - Latex extensible (Reconfirmed 2013)
AS/NZS 2430.3.5:2004 Classification of hazardous areas Examples of area classification - Refineries and major processing plants
AS/NZS 2430.3.8:2004 Classification of hazardous areas Examples of area classification - Surface coatings and adhesives
AS 3730.13-2006 Guide to the properties of paints for buildings Primer - Wood - Solvent-borne - Interior/exterior (Reconfirmed 2016)
AS/NZS 2589.1:1997 Gypsum linings in residential and light commercial construction - Application and finishing Gypsum plasterboard
AS 1789-2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS 3730.9-2006 Guide to the properties of paints for buildings Latex - Exterior - Semi-gloss
AS 2700-1996 Colour Standards for general purposes - Swatches
AS/NZS 2633:1996 Guide to the specification of colours (Reconfirmed 2013)
AS 3730.10-2006 Guide to the properties of paints for buildings Latex - Exterior - Gloss (Reconfirmed 2016)
AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017)
AS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017)
AS/NZS 2430.3.4:2004 Classification of hazardous areas - Examples of area classification - Flammable gases
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings

AS 4773.2-2010 Masonry in small buildings - Construction
AS 3700-2011 Masonry structures
AS 4773.1-2010 Masonry in small buildings - Design
WS14-2012 Timber in Internal Design
WS13-2012 Finishing Timber Externally

View more information
$249.99
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more