Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

AS/NZS 3000:2007

AvailableSuperseded
AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

Electrical installations (known as the Australian/New Zealand Wiring Rules)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

12-11-2007

Preview

The New Wiring Rules 2018 is here. Available in Hardcopy and PDF formats. Buy now.



The 2007 Wiring Rules is available incorporating Amendments 1 and 2 in a different way – check details.




Paperback – A5 size, incorporates Amendments 1 and 2
PDF – A4 size, incorporates Amendments 1 and 2.



To purchase an Unamended Paperback version in A5 size click here.


The presentation of this edition differs from previous editions of AS/NZS 3000 in that the Standard comprises two parts but with both parts bound as one document. Part 1 provides uniform essential elements that constitute the minimum regulatory requirements for a safe electrical installation. It also provides an alternative regulatory vehicle for Australian and New Zealand regulators seeking to move from the present prescription of AS/NZS 3000 in electrical installation safety and licensing legislation. Part 2 provides installation practices that achieve certainty of compliance with the essential safety requirements of Part 1. It is primarily a revision of the 2000 edition to provide work methods and installation practices that are ‘deemed to comply’ with the associated performance outcomes/safety conditions.

This Standard sets out requirements for the design, construction and verification of electrical installations, including the selection and installation of electrical equipment forming part of such electrical installations.These requirements are intended to protect persons, livestock, and property from electric shock, fire and physical injury hazards that may arise from an electrical installation that is used with reasonable care and with due regard to the intended purpose of the electrical installation.In addition, guidance is provided so that the electrical installation will function correctly for the purpose intended.

Originated as part of AS CC1-1931.Previous edition AS/NZS 3000:2000.Fifth edition 2007. Originated as part of AS CC1 1931. Previous edition AS/NZS 3000:2000. Fifth edition 2007.

AS/NZS 61558.2.8:2001 Safety of power transformers, power supply units and similar Particular requirements for bell and chime transformers (IEC 61558-2-8:1998, IDT)
AS/NZS 60479.1:2002 Effects of current on human beings and livestock General aspects
AS/NZS 2648.1:1995 Underground marking tape Non-detectable tape (Reconfirmed 2020)
AS 1418.17-1996 Cranes (including hoists and winches) Design and construction of workboxes (Reconfirmed 2016)
AS/NZS 61241.10:2005 Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present
AS 1359.106-1996 Rotating electrical machines - General requirements - Methods of cooling (IC Code)
AS/NZS 61058.1:2002 Switches for appliances General requirements (IEC 61058.1:2000 MOD)
AS 1359.30-1997 Rotating electrical machines - General requirements - Preferred outputs and frame sizes
AS 62040.3-2002 Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
AS/NZS 1026:2004 Electric cables - Impregnated paper insulated - For working voltages up to and including 19/33 (36) kV
AS 1418.13-1996 Cranes (including hoists and winches) Building maintenance units
AS 1670.4-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning Sound systems and intercom systems for emergency purposes
AS/NZS 3190:2002 Approval and test specification - Residual current devices (current-operated earth-leakage devices)
AS/NZS 61558.2.17:2001 Safety of power transformers, power supply units and similar Particular requirements for transformers for switch mode power supplies (IEC 61558-2-17:1997, MOD)
AS/NZS 2430.3.4:2004 Classification of hazardous areas - Examples of area classification - Flammable gases
AS 1359.114-1997 Rotating electrical machines - General requirements - Vibration measurements and limits
AS/NZS 3017:2001 Electrical installations - Testing and inspection guidelines
AS 3600-2001 Concrete structures
AS/NZS 3018:2001 Electrical installations - Domestic installations
AS 60947.4.1-2004 Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters
AS/NZS 2430.3.9:2004 Classification of hazardous areas Examples of area classification - Miscellaneous
ISO 22967:2010 Forced draught gas burners
AS/NZS 3500.4:2003 Plumbing and drainage Heated water services
AS 60146.1.2-2002 Semiconductor converters General requirements and line commutated converters - Application guide
AS/NZS 3015:2004 Electrical installations - Extra-low voltage d.c. power supplies and service earthing within public telecommunications networks
AS/NZS 4296:1995 Cable trunking systems (Reconfirmed 2016)
AS/NZS 3500.2:2003 Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 60598.1:2003 Luminaires General requirements and tests (IEC 60598-1:2003, MOD)
AS 1359.31-1997 Rotating electrical machines - General requirements Three-phase induction motors - Operation on unbalanced voltages
AS/NZS 1735.18:2002 Lifts, escalators, and moving walks Passenger lifts for private residence - Automatically controlled
AS/NZS 3133:2003 Approval and test specification - Air break switches
AS 1418.6-2004 Cranes, hoists and winches Guided storing and retrieving appliances (Reconfirmed 2018)
AS 1418.14-1996 Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
AS 1418.7-1999 Cranes (including hoists and winches) Builders hoists and associated equipment
AS 1359.101-1997 Rotating electrical machines - General requirements - Rating and performance
AS 62040.2-2001 Uninterruptible power systems (UPS) - Electromagnetic compatibility (EMC) requirements
AS 2209-1994 Timber - Poles for overhead lines
AS/NZS 60479.2:2002 Effects of current on human beings and livestock Special aspects
AS/NZS 3008.1.1:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS 10745-1998 Information technology - Open Systems Interconnection - Upper layers security model
AS 2067-1984 Switchgear assemblies and ancillary equipment for alternating voltages above 1 kV
AS 1418.10(INT)-2004 Cranes, hoists and winches Elevating work platforms
AS/NZS 61008.1:2004 Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 2.1 (2002) MOD)
HB 301-2001 Electrical installations - Designing to the Wiring rules
AS/NZS 3102:2002 Approval and test specification - Electric duct heaters (Reconfirmed 2016)
AS/NZS 61535.1:2003 Installation couplers General requirements
AS/NZS 3100:2002 Approval and test specification - General requirements for electrical equipment
AS/NZS 3123:2005 Approval and test specification - Plugs, socket-outlets and couplers for general industrial application (Reconfirmed 2016)
AS/NZS 3012:2003 Electrical installations - Construction and demolition sites
AS/NZS 2430.3.1:2004 Classification of hazardous areas Examples of area classification - General
AS/NZS 5000.2:2006 Electric cables - Polymeric insulated For working voltages up to and including 450/750 V (Reconfirmed 2017)
AS 4509.1-1999 Stand-alone power systems - Safety requirements
AS/NZS 2430.3.6:2004 Classification of hazardous areas Examples of area classification - Laboratories, including fume cupboards and flammable medical agents
AS 1074-1989 Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
AS 2220.1-1989 Emergency warning and intercommunication systems in buildings - Equipment design and manufacture
AS 1670.3-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning - Fire alarm monitoring
AS/NZS 3008.1.2:1998 Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions
AS/NZS 4836:2001 Safe working on low-voltage electrical installations
AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance - General requirements
AS/NZS 3010:2005 Electrical installations - Generating sets
AS 1735.2-2001 Lifts, escalators and moving walks Passenger and goods lifts - Electric
AS/NZS 4396:1999 Connectors - Insulation piercing - For 0.6/1 kV aerial bundled cables
AS/NZS 2430.3.7:2004 Classification of hazardous areas Examples of area classification - Landfill gas, sewage treatment and sewage pumping plants
AS 4777.2-2005 Grid connection of energy systems via inverters Inverter requirements
AS/NZS 3019:2007 Electrical installations - Periodic verification
AS/NZS 3760:2003 In-service safety inspection and testing of electrical equipment
AS 4070-1992 Recommended practices for protection of low-voltage electrical installations and equipment in MEN systems from transient overvoltages (Reconfirmed 2015)
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS 1418.2-1997 Cranes (including hoists and winches) Serial hoists and winches
AS 3600 SUPP 1-1994 Concrete structures - Commentary (Supplement to AS 3600-1994)
AS 3011.1-1992 Electrical installations - Secondary batteries installed in buildings - Vented cells Vented cells
AS/NZS 3947.3:2001 Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units
AS 4388-1996 A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear
AS/NZS 60598.2.22:2005 Luminaires Particular requirements - Luminaires for emergency lighting (IEC 60598-2 22, Ed. 3.1(2002) MOD)
AS 1418.18-2001 Cranes, hoists and winches Crane runways and monorails
AS 60269.3.1-2005 Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses
AS 1418.15-1994 Cranes (including hoists and winches) - Concrete placing equipment
AS/NZS 3002:2002 Electrical installations - Shows and carnivals
AS/NZS 60335.2.80:2004 Household and similar electrical appliances - Safety Particular requirements for fans (IEC 60335-2-80 Ed 2.2, MOD)
UNI EN ISO 9170-1 : 2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
AS/NZS 2430.3.3:2004 Classification of hazardous areas Examples of area classification - Flammable liquids
AS/NZS 61558.2.7:2001 Safety of power transformers, power supply units and similar Particular requirements for transformers for toys (IEC 61558-2-7:1997, MOD)
AS/NZS 3014:2003 Electrical installations - Electric fences
16/30314880 DC : 0 BS EN ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
AS 1418.5-2002 Cranes, hoists and winches - Mobile cranes
BS ISO 22968:2010 Forced draught oil burners
AS/NZS 60079.10:2004 Electrical apparatus for explosive gas atmospheres Classification of hazardous areas (IEC 60079-10:2002 MOD)
AS 1359.0-1998 Rotating electrical machines - General requirements Introduction and list of Parts
AS/NZS 60898.2:2004 Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. and d.c. operation (IEC 60898-2, Ed. 1.1 (2003) MOD) (Reconfirmed 2016)
AS 3011.2-1992 Electrical installations - Secondary batteries installed in buildings Sealed cells
AS/NZS 60598.2.23:2002 Luminaires Particular requirements - Extra low voltage lighting systems for filament lamps (IEC 60598.2.23:1996, MOD) (Reconfirmed 2016)
AS 4702-2000 Polymeric cable protection covers (Reconfirmed 2013) (Reconfirmed 2020)
AS/NZS 3194:1993 Approval and test specification - Electric shaver supply units
AS/NZS 3009:1998 Electrical installations - Emergency power supplies in hospitals
AS/NZS 3131:2001 Approval and test specification - Plugs and socket-outlets for stationary appliances
AS 2941-2002 Fixed fire protection installations - Pumpset systems
AS/NZS 61558.2.3:2001 Safety of power transformers, power supply units and similar devices Particular requirements for ignition transformers for gas and oil burners (IEC 61558-2-3:1999, IDT)
AS/NZS 60598.2.2:2001 Luminaires Particular requirements - Recessed luminaires (IEC 60598-2-2:1996, MOD)
AS/NZS 5033:2005 Installation of photovoltaic (PV) arrays
AS 3439.4-1995 Low-voltage switchgear and controlgear assemblies - Particular requirements for assemblies for construction sites (ACS)
AS/NZS 60898.1:2004 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD)
AS/NZS 61558.2.15:2001 Safety of power transformers, power supply units and similar Particular requirements for isolating transformers for the supply of medical locations (IEC 61558-2-15:1999, MOD)
AS 4777.3-2005 Grid connection of energy systems via inverters Grid protection requirements
AS 4777.1-2005 Grid connection of energy systems via inverters Installation requirements
AS 1418.12-1991 Cranes (including hoists and winches) Crane collector systems (Reconfirmed 2016)
AS/NZS 60479.3:2002 Effects of current on human beings and livestock Effects of currents passing through the body of livestock (Reconfirmed 2016)
AS/NZS 2785:2000 Suspended ceilings - Design and installation
AS/NZS 3439.5:2001 Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks
AS 2441-2005 Installation of fire hose reels (Reconfirmed 2018)
AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
AS 60269.1-2005 Low-voltage fuses - General requirements
UNI EN ISO 9170-2 : 2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS
AS 60038-2000 Standard voltages
AS/NZS 2053.2:2001 Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016)
AS/NZS 4249:1994 Electrical safety practices - Film, video and television sites
AS/NZS 4763(INT):2006 Safety of Portable Inverters
AS 1319-1994 Safety signs for the occupational environment (Reconfirmed 2018)
AS/NZS 60702.1:2005 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Cables
AS 60146.2-2001 Semiconductor converters - Self-commutated semiconductor converters including direct d.c. converters
AS/NZS 3003:2003 Electrical installations - Patient treatment areas of hospitals and medical, dental practices and dialyzing locations
BS EN ISO 9170-2:2008 Terminal units for medical gas pipeline systems Terminal units for anaesthetic gas scavenging systems
AS 2419.1-2005 Fire hydrant installations System design, installation and commissioning
AS 2293.1-2005 Emergency escape lighting and exit signs for buildings - System design, installation and operation
AS/NZS 2430.3.2:2004 Classification of hazardous areas - Examples of area classification - Vehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars
AS 60146.1.3-2002 Semiconductor converters General requirements and line commutated converters - Transformers and reactors
AS/NZS 3439.1:2002 Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD)
AS/NZS 3004:2002 Electrical installations - Marinas and pleasure craft at low-voltage
AS 1359.102.2-1997 Rotating electrical machinery - General requirements Methods for determining losses and efficiency - Calorimetric method
ISO 22968:2010 Forced draught oil burners
AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
AS/NZS 3016:2002 Electrical installations - Electric security fences
I.S. EN ISO 9170-2:2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS
AS/NZS 60598.2.20:2002 Luminaires Particular requirements - Lighting chains (IEC 60598-2-20:1996, MOD)
AS 2118.1-2006 Automatic fire sprinkler systems General systems
AS/NZS 61241.14:2005 Electrical apparatus for use in the presence of combustible dust Selection and installation (IEC 61241-14, Ed.1.0(2004) MOD)
AS 1418.1-2002 Cranes, hoists and winches General requirements
EN ISO 9170-1:2008 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008)
AS/NZS 61558.2.4:2001 Safety of power transformers, power supply units and similar Particular requirements for isolating transformers for general use (IEC 61558-2-4:1997, MOD)
AS 1418.11-2004 Cranes, hoists and winches - Vehicle-loading cranes
AS 1883-1992 Guide to maintenance and supervision of insulating oils in service
AS/NZS 3820:1998 Essential safety requirements for low voltage electrical equipment
AS 1418.8-2002 Cranes, hoists and winches - Special purpose appliances
I.S. EN ISO 9170-1:2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
AS/NZS 3832:1998 Electrical installations - Cold-cathode illumination systems
AS/NZS 3013:2005 Electrical installations - Classification of the fire and mechanical performance of wiring system elements (Reconfirmed 2020)
AS/NZS 61558.2.5:2003 Safety of power transformers, power supply units and similar Particular requirements for shaver transformers (IEC 61558-2-5:1997, MOD)
AS/NZS 61009.1:2004 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 2.1 (2003) MOD)
DIN EN ISO 9170-2 E : 2009 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS
AS 1359.107-1996 Rotating electrical machines - General requirements - Classification of types of construction and mounting arrangements (IM Code)
AS 1359.102.1-1997 Rotating electrical machines - General requirements Methods for determining losses and efficiency - General
AS 4154-1993 General access floors (elevated floors)
AS 5601-2004 Gas installations
AS 1418.19-2007 Cranes, hoists and winches Telescopic handlers
ISO 9170-1:2017 Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum
AS 62040.1.2-2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations
AS/NZS 60335.2.76:2003 Household and similar electrical appliances - Safety Particular requirements for electric fence energizers (IEC 60335-2-76 Ed 2.2, MOD) (Reconfirmed 2016)
BS ISO 22967:2010 Forced draught gas burners
AS/NZS 60598.2.25:2001 Luminaires Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings (IEC 60598.2.25:1994, MOD) (Reconfirmed 2013)
AS 3007.2-2004 Electrical installations - Surface mines and associated processing plant - General protection requirements
CSA Z9170.1 : 2011 : R2015 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS
AS 60146.1.1-2002 Semiconductor converters General requirements and line commutated converters - Specifications of basic requirements
CSA Z9170.1 : 2011 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES, VACUUM, AND ANAESTHETIC GAS SCAVENGING SYSTEMS
AS/NZS 3500.5:2000 National Plumbing and Drainage - Domestic installations
AS 60947.8-2005 Low-voltage switchgear and controlgear - Control units for built-in thermal protection (PTC) for rotating electrical machines
AS/NZS 3439.2:2002 Low-voltage switchgear and controlgear assemblies Particular requirements for busbar trunking systems (busways)
AS/NZS 1668.1:1998 The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings
AS/NZS 2430.3.5:2004 Classification of hazardous areas Examples of area classification - Refineries and major processing plants
AS/RISSB 7722 : 2016 EMC Management
AS/NZS 3191:2003 Electric flexible cords
AS 1670.1-2004 Fire detection, warning, control and intercom systems - System design, installation and commissioning Fire
DIN EN ISO 9170-1 E : 2008 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
DIN EN ISO 9170-1:2016-09 (Draft) TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM
IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
ISO 9170-2:2008 Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems
EN ISO 9170-2:2008 Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008)
AS 1418.3-1997 Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
AS 2118.1-1999 Automatic fire sprinkler systems - General requirements
AS/NZS 2430.3.8:2004 Classification of hazardous areas Examples of area classification - Surface coatings and adhesives
AS 62040.1.1-2003 Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas
AS/NZS 61558.2.23:2001 Safety of power transformers, power supply units and similar devices Particular requirements for transformers for construction sites (IEC 61558-2-23:2000, MOD)
AS/NZS 61558.1:2000 Safety of power transformers, power supply units and similar General requirements and tests (IEC 61558-1 Ed 1.1, MOD)
AS 1359.109-1998 Rotating electrical machines - General requirements - Noise limits
AS 1418.16-1997 Cranes (including hoists and winches) Mast climbing work platforms
AS/NZS 3001:2001 Electrical installations - Relocatable premises (including caravans and tents) and their site installations
AS/NZS 2589.1:1997 Gypsum linings in residential and light commercial construction - Application and finishing Gypsum plasterboard
AS/NZS 61558.2.6:2001 Safety of power transformers, power supply units and similar Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997, MOD)
DIN EN ISO 9170-2:2009-09 TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS
BS EN ISO 9170-1:2008 Terminal units for medical gas pipeline systems Terminal units for use with compressed medical gases and vacuum
AS 1418.4-2004 Cranes, hoists and winches Tower cranes
AS 1670.6-1997 Fire detection, warning, control and intercom systems - System design, installation and commissioning Smoke alarms
AS/NZS 1768:2007 Lightning protection
AS 60947.2-2005 Low-voltage switchgear and controlgear - Circuit-breakers
AS/NZS 3808:2000 Insulating and sheathing materials for electric cables
AS/NZS 1125:2001 Conductors in insulated electric cables and flexible cords (Reconfirmed 2017)
AS 2118.10-1995 Automatic fire sprinkler systems Approval documentation (Reconfirmed 2013)
AS/NZS 3112:2004 Approval and test specification - Plugs and socket-outlets
AS/NZS 61558.2.9:2003 Safety of power transformers, power supply units and similar products Particular requirements for transformers for class III handlamps for tungsten filament lamps (IEC 61558-2-9:2002, MOD)
AS 60529-2004 Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018)
AS/NZS 3439.3:2002 Low-voltage switchgear and controlgear assemblies Particular requirements for low voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards (IEC 60439-3:1990 MOD)
AS/NZS 5000.1:2005 Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017)

AS/NZS 61008.1:2011 Residual current operated circuit breakers without integral overcurrent protection for household and similar uses (RCCBs) General rules (IEC 61008-1, Ed. 3.0 (2010) MOD)
AS/NZS 60079.17:2009 Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD)
AS/NZS 3012:2010 Electrical installations - Construction and demolition sites
AS 2550.1-2011 Cranes, hoists and winches - Safe use General requirements
AS/NZS 3800:2012 Electrical equipment for explosive atmospheres - Repair and overhaul
AS 1851-2012 Routine service of fire protection systems and equipment
AS 4553-2008 Gas space heating appliances
AS 5262-2011 LP Gas mobile industrial direct fired air heaters
AS/NZS 4755.3.5:2016 Demand response capabilities and supporting technologies for electrical products Interaction of demand response enabling devices and electrical products - Operational instructions and connections for grid-connected electrical energy storage (EES) systems
AS 2118.1:2017 Automatic fire sprinkler systems General systems
AS 1940:2017 The storage and handling of flammable and combustible liquids
AS/NZS 5761:2011 In-service safety inspection and testing - Second-hand equipment prior to sale
AS/NZS 2982:2010 Laboratory design and construction
AS 5062:2016 Fire protection for mobile and transportable equipment
AS/NZS 2243.6:2010 Safety in laboratories Plant and equipment aspects
AS 2476-2008 General fumigation procedures
AS/NZS 1546.3:2008 On-site domestic wastewater treatment units Aerated wastewater treatment systems
AS/NZS 4871.2:2010 Electrical equipment for mines and quarries Distribution, control and auxiliary equipment
AS/NZS 61058.1:2008 Switches for appliances General requirements (IEC 61058-1, Ed. 3.1 (2000), MOD)
AS/NZS 60335.2.79:2017 Household and similar electrical appliances - Safety Particular requirements for high pressure cleaners and steam cleaners
AS/NZS 3003:2018 Electrical installations - Patient areas
AS/NZS 3010:2017 Electrical installations - Generating sets
AS/NZS 61534.1:2008 Powertrack systems General requirements (IEC 61534-1, Ed. 1 (2003) MOD)
AS/NZS 4777.1:2016 Grid connection of energy systems via inverters Installation requirements
AS 2703-2008 Vehicle loop detector sensors
AS/NZS 3100:2017 Approval and test specification - General requirements for electrical equipment
AS/NZS 4836:2011 Safe working on or near low-voltage electrical installations and equipment
AS 1546.3:2017 On-site domestic wastewater treatment units Secondary treatment systems
AS/NZS 2243.8:2014 Safety in laboratories Fume cupboards
AS/NZS 3002:2008 Electrical installations - Shows and carnivals
AS/NZS 5070.1:2008 Siting and operation of radiocommunications facilities General guidelines for fixed, mobile and broadcasting facilities including fixed location satellite earth stations independent of the operating frequency (Reconfirmed 2019)
AS/NZS 4871.1:2010 Electrical equipment for mines and quarries General requirements
AS 4200.2:2017 Pliable building membranes and underlays Installation
AS 4722-2009 Passenger ropeways and passenger conveyors
AS/NZS 4871.6:2013 Electrical equipment for mines and quarries Diesel powered machinery and ancillary equipment
AS/NZS 60950.1:2011 Information technology equipment - Safety General requirements (IEC 60950-1, Ed. 2.0 (2005), MOD)
AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
AS 2865-2009 Confined spaces
AS/NZS 4755.3.3:2014 Demand response capabilities and supporting technologies for electrical products Interaction of demand response enabling devices and electrical products - Operational instructions and connections for electric storage and electric-boosted storage water heaters
AS/NZS 4761.2:2008 Competencies for working with electrical equipment for hazardous areas (EEHA) Guide to assessing competency
AS 4024.3002-2009 Safety of machinery Materials forming and shearing - Hydraulic power presses
AS/NZS 2081:2011 Electrical protection devices for mines and quarries (Reconfirmed 2022)
AS 4741-2010 Testing of connections to low voltage electricity networks (Reconfirmed 2021)
AS 2252.6-2011 Controlled environments Clean workstations - Design, installation and use
AS/NZS 3004.2:2008 Electrical installations - Marinas and recreational boats Recreational boats installations
AS/NZS 3019:2007 Electrical installations - Periodic verification
AS/NZS 4853:2012 Electrical hazards on metallic pipelines
AS 2419.1:2017 Fire hydrant installations System design, installation and commissioning
AS/NZS 5762:2011 In-service safety inspection and testing - Repaired electrical equipment
AS/NZS 3017:2007 Electrical installations - Verification guidelines
AS/NZS 3008.1.1:2017 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS 2252.2-2009 Controlled environments Biological safety cabinets Class II - Design
AS 3533.4.2-2013 Amusement rides and devices Specific requirements - Contained play facilities
AS/NZS 3003:2011 Electrical installations - Patient areas
AS 1603.17-2011 Automatic fire detection and alarm systems Warning equipment for people with hearing impairment
AS 2144:2014 Traffic signal lanterns
AS 2941-2008 Fixed fire protection installations - Pumpset systems
AS 2118.4-2012 Automatic fire sprinkler systems Sprinkler protection for accommodation buildings not exceeding four storeys in height
AS/NZS 2290.1:2014 Electrical equipment for coal mines - Introduction, inspection and maintenance For hazardous areas
AS/NZS 4755.3.2:2012 Demand response capabilities and supporting technologies for electrical products Interaction of demand response enabling devices and electrical products - Operational instructions and connections for devices controlling swimming pool pump-units
AS 2714-2008 The storage and handling of organic peroxides (Reconfirmed 2021)
AS/NZS 5110:2011 Recessed luminaire barriers (Reconfirmed 2020)
AS/NZS 3008.1.2:2010 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS 60038-2012 Standard voltages
AS/NZS 4755.1:2017 Demand response capabilities and supporting technologies for electrical products Demand Response Framework and requirements for Demand Response Enabling Devices (DREDs)
AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
AS 1546.4:2016 On-site domestic wastewater treatment units Domestic greywater treatment systems
AS/NZS 5033:2012 Installation and safety requirements for photovoltaic (PV) arrays
AS/NZS 4761.1:2008 Competencies for working with electrical equipment for hazardous areas (EEHA) Competency Standards
AS/NZS 1158.1.2:2010 Lighting for roads and public spaces Vehicular traffic (Category V) lighting - Guide to design, installation, operation and maintenance
AS 2941-2013 Fixed fire protection installations - Pumpset systems
AS/NZS 4509.1:2009 Stand-alone power systems Safety and installation (Reconfirmed 2017)
AS/NZS 3004.1:2008 Electrical installations - Marinas and recreational boats Marinas
AS 5711-2013 Smart grid vocabulary
AS/NZS 4703:2007 Electrical wiring in furniture (Reconfirmed 2018)
AS/NZS 4240.1:2009 Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021)
HB 242-2007 High voltage mining equipment for use underground (Reconfirmed 2019)
AS 3533.2-2009 Amusement rides and devices Operation and maintenance
AS 4852.2-2009 Variable message signs Portable signs
AS/NZS 3080:2013 Information technology - Generic cabling for customer premises (ISO/IEC 11801:2011, MOD)
AS 5092-2009 CNG refuelling stations
AS 4852.1-2009 Variable message signs - Fixed signs
AS/NZS 3500.3:2018 Plumbing and drainage Stormwater drainage
AS/NZS 5601.1:2013 Gas installations General installations
AS/NZS 3084:2017 Telecommunications installations - Telecommunications pathways and spaces for commercial buildings
AS 3533.1-2009 Amusement rides and devices Design and construction
SA/SNZ HB 252:2014 Communications cabling manual - Module 3: Residential communications cabling handbook
AS/NZS 1546.2:2008 On-site domestic wastewater treatment units Waterless composting toilets
AS/NZS 5026:2012 The storage and handling of Class 4 dangerous goods
AS/NZS 3001:2008 Electrical installations - Transportable structures and vehicles including their site supplies
AS 5100.5:2017 Bridge design Concrete
AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures
AS 2578-2009 Traffic signal controllers
AS 4995-2009 Greywater treatment systems for vessels operated on inland waters
AS/NZS 61009.1:2011 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBOs) General rules (IEC 61009-1, Ed. 3.0 (2010) MOD)
AS/NZS 1596:2008 The storage and handling of LP Gas
AS 2067:2016 Substations and high voltage installations exceeding 1 kV a.c.
AS/NZS 3100:2009 Approval and test specification - General requirements for electrical equipment
AS 4551-2008 Domestic gas cooking appliances
AS/NZS 5601.2:2013 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
AS 2252.5:2017 Controlled environments Cytotoxic drug safety cabinets (CDSC) - Design, construction, installation, testing and use
AS 2896-2011 Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
AS 1228:2016 Pressure equipment - Boilers
HB 13-2007 Electrical equipment for hazardous areas
AS/NZS 2243.9:2009 Safety in laboratories Recirculating fume cabinets
AS/NZS 1367:2016 Coaxial cable and optical fibre systems for the RF distribution of digital television, radio and in-house analog television signals in single and multiple dwelling installations
AS/NZS 3008.1.1:2009 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
AS/NZS 5601.1:2010 Gas installations General installations
AS 4825-2011 Tunnel fire safety
AS 2832.5-2008 Cathodic protection of metals Steel in concrete structures
AS/NZS 3008.1.2:2017 Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
AS 2339:2017 Traffic signal posts, mast arms and attachments
AS 2550.5:2016 Cranes, hoists and winches - Safe use Mobile cranes
AS/NZS 4871.1:2012 Electrical equipment for mines and quarries General requirements
AS/NZS 3112:2017 Approval and test specification - Plugs and socket-outlets
AS 1375-2013 Industrial fuel-fired appliances
AS/NZS 1299:2009 Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020)
AS 4755.3.1-2008 Demand response capabilities and supporting technologies for electrical products Interaction of demand response enabling devices and electrical products - Operational instructions and connections for airconditioners
AS/NZS 60079.14:2009 Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD)
AS 4897-2008 The design, installation and operation of underground petroleum storage systems
HB 252-2007 Communications Cabling Manual - Module 3: Residential communications cabling handbook
AS 2885.1-2012 Pipelines - Gas and liquid petroleum Design and construction
AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
AS/NZS 3007:2013 Electrical equipment in mines and quarries - Surface installations and associated processing plant
AS/NZS 4509.2:2010 Stand-alone power systems System design (Reconfirmed 2017)
AS 4233.2:2013 High pressure water jetting systems Construction and performance
AS 2118.5-2008 Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020)
AS/NZS 1596:2014 The storage and handling of LP Gas
AS/NZS 3760:2010 In-service safety inspection and testing of electrical equipment
AS/NZS 4755.3.1:2012 Demand response capabilities and supporting technologies for electrical products Interaction of demand response enabling devices and electrical products - Operational instructions and connections for air conditioners
AS/NZS 3112:2011 Approval and test specification - Plugs and socket-outlets
AS 5414-2012 Bushfire water spray systems
AS 3814-2009 Industrial and commercial gas-fired appliances

View more information
$208.85
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more