AS/NZS 3750.4:1994

Current

Current The latest, up-to-date edition.

Preview

Paints for steel structures Bitumen paint (Reconfirmed 2013)

Publisher: Standards Australia

Published: 08-15-1994

Available Formats: PDF 9 Users - English, PDF 5 Users - English, PDF 3 Users - English, PDF 1 User - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

Provides requirements for single component bitumen paints intended for the short-term protection of iron and steel against atmospheric corrosion.

Scope - (Show below) - (Hide below)

This Standard sets out requirements for single-component paints incorporating bitumen, which is derived from petroleum crudes and intended for the short-term protection of iron and steel against atmospheric corrosion. The paints should be applied by brush, roller or spray. The Standard deals with coatings that are surface-dry within 10 h, and may be overcoated after 24 h. Paint described in this Standard is listed as Paint Type 22 in AS 2312 and may be used in systems SP2-A and SP2-B.The paint is intended as a single or two-coat system on steel.NOTES:1 Appendix A provides recommendations on information which should be provided by the purchaser at the time of enquiry or order.2 Additional information on the use and application of bitumen paints is given in Appendix B.3 Alternative means for determining compliance with this Standard are given in Appendix C.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	Standards Australia
ProductNote	Reconfirmation Notice 16-09-2013
Pages
ISBN
Committee	CH/3
Supersedes	DR 93015

History - (Show below) - (Hide below)

First published as Joint Standard AS/NZS 3750.4:1994
Reconfirmed 2013.

Standards Referenced By This Book - (Show below) - (Hide below)

AS 1580.457.1-1988	Paints and related materials - Methods of test - Resistance to natural weathering
AS 1399-1990	Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 2854-1986	Tinplate cans for general use
AS 1580.408.4-1993	Paints and related materials - Methods of test - Adhesion (cross-cut)
AS 1199-1988	Sampling procedures and tables for inspection by attributes
AS/NZS 1580.481.1.8:1998	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013)
AS/NZS 1580.211.1:1995 (R2013)	Paints and related materials - Methods of test - Degree of settling
AS 1580.401.5-2002	Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.205.3-1981	Paints and related materials - Methods of test - Application properties - Roller coating
AS/NZS 1580.205.4:1998	Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
AS/NZS 1580.481.1.10:1998	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013)
AS 3904.1-1987	Quality management and quality system elements Guidelines
AS 1580.108.2-2004	Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019)
AS 1580.481.1.10-1991	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling
AS 1580.301.2-1990	Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013)
AS/NZS 1580.108.1:1994 (R2013)	Paints and related materials - Methods of test - Determination of dry film thickness on metallic substrates - Non-destructive methods
AS/NZS 1580.101.5:1999	Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS 1580.101.5-1986	Paints and related materials - Methods of test - Conditions of test, temperature and humidity controlled
AS/NZS 1580.101.1:1999 (R2013)	Paints and related materials - Methods of test - Conditions of test - Temperature, humidity and airflow control
AS 1580.401.5-1993	Paints and related materials - Methods of test - Hard dry condition - Sanding test
AS 2310-1980	Glossary of paint and painting terms
AS/NZS 1580.481.1.9:1998	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013)
AS 1580.401.1-1981	Paints and related materials - Methods of test - Surface dry condition
AS/NZS 2310:2002 (R2016)	Glossary of paint and painting terms
AS 1627.7-1988	Metal finishing - Preparation and pretreatment of surfaces Hand tool cleaning of metal surfaces
AS 2854-2004	Tinplate cans for general use
AS 1580.104.1-1992	Paints and related materials - Methods of test - Recommended materials for test panels
AS/NZS 1580.457.1:1996 (R2013)	Paints and related materials - Methods of test - Resistance to natural weathering
AS 1580.211.2-1980	Paints and related materials - Methods of test - Ease of manual re-incorporation
AS 1580.481.1.8-1991	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking
AS 1580.481.1.6-1991	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion
AS 1580.404.1-1981	Paints and related materials - Methods of test - Recoating properties
AS/NZS 1580.211.2:1995	Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
HB 18.44-1991	Guidelines for third-party certification and accreditation Guide 44 - General rules for ISO or IEC international third-party certification schemes for products
AS 1580.481.1-1975	Paints and related materials - Methods of test - Assessment of individual defects of exposed films
AS/NZS 1580.104.1:2000	Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS 1580.103.1-1980	Paints and related materials - Methods of test - Preliminary examination and preparation for testing
AS 1580.105.2-2002	Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS 2905-1986	Steel drums
AS 1627.2-1989	Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning
AS 3900.1-1987	Quality management and quality assurance Standards Guidelines for selection and use
AS 1580.481.1.7-1991	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking
AS 1580.408.4-2004	Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019)
AS 2312-1984	Guide to the protection of iron and steel against exterior atmospheric corrosion
AS/NZS 1580.481.1.7:1998	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013)
AS/NZS 1580.205.1:1997	Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013)
AS 1580.481.3-2002	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS 1580.205.1-1981	Paints and related materials - Methods of test - Application properties - Brushing
AS 1580.105.2-1993	Paints and related materials - Methods of test - Pretreatment of metal test panels - Sanding
AS 1627.4-1989	Metal finishing - Preparation and pretreatment of sufaces Abrasive blast cleaning
AS 1580.452.2-1992	Paints and related materials - Methods of test - Resistance to corrosion - Salt droplet test
AS 1627.4-2005 (R2017)	Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel
AS/NZS 1580.404.1:1997	Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013)
AS 1580.108.1-1980	Paints and related materials - Methods of test - Determination of dry film thickness on iron and steel substrates (permanent magnet instruments)
AS 2905-2005	Steel drums
AS 1580.108.2-1993	Paints and related materials - Methods of test - Dry film thickness - Paint inspection gauge
AS 1627.2-2002	Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017)
AS 1580.481.1.9-1991	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering
AS 1580.211.1-1980	Paints and related materials - Methods of test - Degree of settling
AS 1580.481.3-1992	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS 1580.101.1-1986	Paints and related materials - Methods of test - Air drying conditions
AS/NZS 1580.205.3:1997	Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013)
AS/NZS 1580.401.1:1999	Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013)
AS/NZS 1580.103.1:1995	Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS/NZS 1580.481.1.6:1998	Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013)
AS/NZS 2312:2002	Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 1580.452.2-2002	Paints and related materials - Methods of test Resistance to corrosion - Salt droplet test
AS 1580.205.2-1981	Paints and related materials - Methods of test - Application properties - Conventional air spraying
AS/NZS 1580.205.2:1997	Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS 1580.205.4-1981	Paints and related materials - Methods of test - Application properties - Airless spraying

Standards Referencing This Book - (Show below) - (Hide below)

AS/NZS 2544:1995	Grey iron pressure fittings
AS/NZS 2280:2004	Ductile iron pipes and fittings
AS/NZS 2280:1995	Ductile iron pressure pipes and fittings
AS 3996:2019	Access covers and grates
AS/NZS 5131:2016	Structural steelwork - Fabrication and erection
AS/NZS 2280:1999	Ductile iron pressure pipes and fittings
AS/NZS 2280:2012	Ductile iron pipes and fittings

Add To Cart

Product Format

Quantity

add to cart

AS/NZS 3750.4:1994

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

Scope - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

History - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?