AS/NZS 3750.9:1994
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
01-01-1994
Provides requirements for organic zinc-rich priming paint intended for use on iron and steel to provide protection against atmospheric corrosion.
This Standard specifies requirements for an organic zinc-rich primer intended to protect iron and steel against atmospheric corrosion. It is suitable for application by brush, roller or spray. Type 2 paint specified in the Standard is referred to in AS 2312 as Paint Reference No. 2.NOTES:1 This paint may be used as detailed for systems MP1-B, MP2-C, MP2-D, MP5-E, MP5-F, MP5-G, MP5-H, MP9-B, MP10-B, LP1-E, LP1-F, LP1-G, LP1-H, LP2-D, LP2-E and LP2-F in AS 2312.Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order. Additional information on the use and application of organic zinc-rich primer is provided in Appendix B. Alternative methods for determining compliance with this Standard are contained in Appendix C.
Committee |
CH-003
|
DocumentType |
Standard
|
ISBN |
0 7262 9357 1
|
Pages |
16
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
First published as AS 2204-1978.Jointly revised and redesignated as Joint Standard AS/NZS 3750.9:1994. First published as AS 2204-1978. Jointly revised and redesignated as Joint Standard AS/NZS 3750.9:1994.
AS 1580.205.1-1981 | Paints and related materials - Methods of test Application properties - Brushing |
AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
AS 3904.1-1987 | Quality management and quality system elements Guidelines |
AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
AS 1580.103.1-1980 | Paints and related materials - Methods of test Preliminary examination and preparation for testing |
AS 1152-1993 | Specification for test sieves |
AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
AS 3900.1-1987 | Quality management and quality assurance Standards Guidelines for selection and use |
AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
AS 2310-1980 | Glossary of paint and painting terms |
AS 1580.481.1.10-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling |
AS 1580.101.1-1986 | Paints and related materials - Methods of test Air drying conditions |
AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
AS 2105-1992 | Inorganic zinc silicate paint |
AS 2854-2004 | Tinplate cans for general use |
AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
AS 1580.205.4-1981 | Paints and related materials - Methods of test Application properties - Airless spraying |
AS 1580.404.1-1981 | Paints and related materials - Methods of test Recoating properties |
HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
AS 1580.481.3-1992 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates |
AS 1580.205.3-1981 | Paints and related materials - Methods of test Application properties - Roller coating |
AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
AS 1580.481.1.8-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking |
AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS 2854-1986 | Tinplate cans for general use |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
AS/NZS 1580.401.1:1999 | Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013) |
AS 1580.205.2-1981 | Paints and related materials - Methods of test Application properties - Conventional air spraying |
AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
AS 1580.401.1-1981 | Paints and related materials - Methods of test Surface dry condition |
AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
AS 2905-2005 | Steel drums |
AS 1580.211.1-1980 | Paints and related materials - Methods of test Degree of settling |
AS 1580.481.1.9-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering |
AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
AS 1580.481.1.7-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking |
AS 1580.401.5-1993 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
AS 1580.457.1-1988 | Paints and related materials - Methods of test Resistance to natural weathering |
AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
AS 2905-1986 | Steel drums |
AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
AS 1580.601.1-1975 | Paints and related materials - Methods of test Colour - Visual comparison |
AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
AS 2312-1984 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
AS 1580.211.2-1980 | Paints and related materials - Methods of test Ease of manual re-incorporation |
AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS 4145.2-2008 | Locksets and hardware for doors and windows Mechanical locksets for doors and windows in buildings |
AS 2470-2005 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016) |
AS 2470-1995 | Steel cylinders for compressed gases - Welded - 11 kg to 150 kg |
AS 4751(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous open sections |
AS 5039-2008 | Security screen doors and security window grilles |
AS 2469-1998 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg |
AS/NZS 4604:1999 | Security window grilles |
AS 4750(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous hollow sections |
AS/NZS 4792:1999 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process |
AS/NZS 4791:2006 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017) |
AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
AS/NZS 4791:1999 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process |
AS 5039-2003 | Security screen doors and security window grilles |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS/NZS 3750.14:1997 | Paints for steel structures High-build epoxy (two-pack) |
AS/NZS 3845:1999 | Road safety barrier systems |
AS/NZS 3750.12:1996 | Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013) |
AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
AS/NZS 3750.16:1998 | Paints for steel structures Waterborne primer and paint for galvanized, zinc/aluminium alloy-coated and zinc-primed steel (Reconfirmed 2013) |
AS 4750-2003 | Electrogalvanized (zinc) coatings on ferrous hollow and open sections (Reconfirmed 2017) |
AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
AS/NZS 2785:2000 | Suspended ceilings - Design and installation |
AS 4145.3-2001 | Locksets Mechanical locksets for windows in buildings (Reconfirmed 2018) |
AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
AS/NZS 2041:1998 | Buried corrugated metal structures |
AS 2470-1998 | Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.