AS/NZS 5000.1:2005
Current
The latest, up-to-date edition.
Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
17-11-2005
Specifies the construction, dimensions and test requirements for single- and multicore cables insulated with polymeric materials intended for use at working voltages up to and including 0.6/1 (1.2) kV. It does not apply to polymeric insulated cables for special installations and service conditions or for which there are separate Australian/New Zealand Standards.
This Standard specifies construction, dimensions and tests for single- and multicore cables insulated with polymeric materials intended for use in electrical installations at working voltages up to and including 0.6/1 (1.2)kV.It does not apply to polymeric insulated cables for special installations and service conditions or for which there are separate Australian/New Zealand Standards, e.g. neutral screened cables, welding cables, flexible cords and aerial bundled cables.NOTES: 1 Purchasing guidelines are contained in AppendixA.2 AS/NZS3008.1 should be referenced to assist correct cable size selection for the intended application and installation.
Committee |
EL-003
|
DocumentType |
Standard
|
ISBN |
0 7337 7004 5
|
Pages |
25
|
ProductNote |
Reconfirmed 20/01/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 20/01/2017
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes | |
UnderRevision |
First published in Australia as part of AS C50-1928.Second edition 1939 (being endorsement of BS 7-1939 with amendments).AS C116 first published 1941.AS C130 first published 1941.AS (E)C502 first published 1943.AS C50-1939, AS C116-1941, AS C130-1941 and AS (E)C502-1943 revised, amalgamated and designated AS C116-1950.AS C147 first published 1950.Third edition AS C116-1955.Second edition AS C147-1955.AS C178 first published 1966.Fourth edition AS C116-1967.Third edition AS C147-1967.Fourth edition 1969.Fourth edition AS C116-1970.AS C189 first published 1971.Fifth edition AS C147-1972.Sixth edition AS C116-1972.Revised and redesignated in part as AS 3116-1974.AS C189-1971 and part of AS C147-1972 revised, amalgamated and redesignated AS 3147-1974.AS C178-1966 revised and redesignated in part as AS 3178-1975.AS C189-1971 withdrawn 1976.AS C147-1972 withdrawn 1976.Second edition AS 3147-1976.Second edition AS 3116-1976.AS 3198 first published 1977.Second edition AS 3178-1978.Third edition AS 3116-1981.Third edition AS 3147-1981.Fourth edition 1988.Fourth edition AS 3116-1990.Second edition AS 3198-1990.Third edition AS 3178-1991.Fifth edition AS 3147-1992.First published in New Zealand as NZS/AS 3198-1990.NZS/AS 3116 first published 1990. NZS/AS 3198-1990 jointly revised and designated as AS/NZS 3198:1996.NZS/AS 3116-1990 jointly revised and designated as AS/NZS 3116:1996.AS 3147-1992, AS/NZS 3116:1996 and AS/NZS 3198:1996 jointly revised, amalgamated and redesignated AS/NZS 5000.1:1999.AS 3178-1991 and AS/NZS 5000.1:1999 jointly revised, amalgamated and redesignated AS/NZS 5000.1:2003.Third edition 2005.Reconfirmed 2017. Originated as AS/NZS 5000.1:1999. Second edition 2003, incorporating AS 3178-1991. Third edition 2005. Reissued incorporating Amendment No. 1 (December 2006).
AS/NZS 4507:1998 | Cables - Fire performance |
AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 3560.2:2003 | Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1 (1.2) kV Copper conductors |
AS/NZS 1660.1:1998 | Test methods for electric cables, cords and conductors Conductors and metallic components (Reconfirmed 2017) |
AS/NZS 3008.1.2:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions |
AS/NZS 1660.2.3:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials (Reconfirmed 2017) |
AS/NZS 1125:2001 | Conductors in insulated electric cables and flexible cords (Reconfirmed 2017) |
AS/NZS 3808:2000 | Insulating and sheathing materials for electric cables |
AS/NZS 4961:2003 | Electric cables - Polymeric insulated - For distribution and service applications (Reconfirmed 2017) |
AS/NZS 1660.5.6:2005 | Test methods for electric cables, cords and conductors Fire tests - Test for vertical flame propagation for a single insulated wire or cable |
AS/NZS 1660.3:1998 | Test methods for electric cables, cords and conductors Electrical tests (Reconfirmed 2017) |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
AS/NZS 1660.2.2:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials (Reconfirmed 2017) |
AS 3008.1-1989 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV |
AS/NZS 3008.1.1:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
AS/NZS 2893:2002 | Electric cables - Lead and lead alloy sheaths - Composition |
AS/NZS 3863:2002 | Galvanized mild steel wire for armouring of cables |
AS/NZS 1660.2.1:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application (Reconfirmed 2017) |
AS/NZS 3560.1:2000 | Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV Aluminium conductors (Reconfirmed 2021) |
AS/ACIF S008-2006 | Requirements for customer cabling products |
AS/NZS 3001:2001 | Electrical installations - Relocatable premises (including caravans and tents) and their site installations |
AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
AS/NZS 2243.6:2010 | Safety in laboratories Plant and equipment aspects |
AS/NZS 3015:2004 | Electrical installations - Extra-low voltage d.c. power supplies and service earthing within public telecommunications networks |
AS/NZS 3003:2018 | Electrical installations - Patient areas |
AS/NZS 1768:2007 | Lightning protection |
AS 2832.1-2004 | Cathodic protection of metals Pipes and cables |
AS/NZS 5000.2:2006 | Electric cables - Polymeric insulated For working voltages up to and including 450/750 V (Reconfirmed 2017) |
AS 1530.4-2005 | Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction |
AS/NZS 4026:2001 | Electric cables - For underground residential distribution systems |
AS/NZS 2802:2000 | Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020) |
AS/NZS 3004.2:2008 | Electrical installations - Marinas and recreational boats Recreational boats installations |
AS/NZS 1972:2006 | Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020) |
AS/NZS 3008.1.1:2017 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
AS/NZS 3003:2003 | Electrical installations - Patient treatment areas of hospitals and medical, dental practices and dialyzing locations |
AS/NZS 3003:2011 | Electrical installations - Patient areas |
AS 2353:2018 | Pedestrian push-button assemblies |
AS 2144:2014 | Traffic signal lanterns |
AS/NZS 1802:2003 | Electric cables - Reeling and trailing - For underground coal mining purposes |
AS/NZS 4026:2008 | Electric cables - For underground residential distribution systems |
AS/NZS 3008.1.2:2010 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions |
AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 3123:2005 | Approval and test specification - Plugs, socket-outlets and couplers for general industrial application (Reconfirmed 2016) |
AS/NZS 3004.1:2008 | Electrical installations - Marinas and recreational boats Marinas |
AS/NZS 1802:2018 | Electric cables - Reeling and trailing - For underground coal mining |
AS/NZS 4703:2007 | Electrical wiring in furniture (Reconfirmed 2018) |
AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance - General requirements |
AS/NZS 3013:2005 | Electrical installations - Classification of the fire and mechanical performance of wiring system elements (Reconfirmed 2020) |
AS/NZS 5139:2019 | Electrical installations - Safety of battery systems for use with power conversion equipment |
AS/NZS 3001:2008 | Electrical installations - Transportable structures and vehicles including their site supplies |
AS/NZS 3004:2002 | Electrical installations - Marinas and pleasure craft at low-voltage |
AS/NZS 2201.1:2007 | Intruder alarm systems Client’s premises - Design, installation, commissioning and maintenance |
AS 2832.2-2003 | Cathodic protection of metals Compact buried structures |
AS/NZS 3008.1.1:2009 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
AS 2832.3-2005 | Cathodic protection of metals Fixed immersed structures |
AS 2832.5-2008 | Cathodic protection of metals Steel in concrete structures |
AS/NZS 3008.1.2:2017 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions |
AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
AS/NZS 1299:2009 | Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020) |
AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS 2832.4-2006 | Cathodic protection of metals Internal surfaces (Reconfirmed 2016) |
AS/NZS 2144:2002 | Traffic signal lanterns |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.