|
AWS D1.4 : 1998
|
STRUCTURAL WELDING CODE - REINFORCING STEEL |
|
ANSI/AWWA D103 : 2009
|
FACTORY-COATED BOLTED CARBON STEEL TANKS FOR WATER STORAGE |
|
ASME PV CODE 8 DIV 2 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
|
AWWA C905 : 2010
|
POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 14 IN. THROUGH 48 IN. (350 MM THROUGH 1,200 MM), FOR WATER TRANSMISSION AND DISTRIBUTION |
|
ISO 15649:2001
|
Petroleum and natural gas industries Piping |
|
API STD 1104:2013
|
WELDING OF PIPELINES AND RELATED FACILITIES |
|
ASNT SNT TC 1A : 2016
|
TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
|
AWWA C400 : 2003
|
ASBESTOS-CEMENT PRESSURE PIPE, 4 IN. THROUGH 16 IN. (100 MM THROUGH 400 MM), FOR WATER DISTRIBUTION SYSTEMS |
|
ASME B31.1 : 2016
|
POWER PIPING |
|
BS 7910:1999
|
GUIDE ON METHODS FOR ASSESSING THE ACCEPTABILITY OF FLAWS IN METALLIC STRUCTURES |
|
ASME PV CODE 3 ND DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR THE CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - CLASS 3 COMPONENTS |
|
AWWA C402 : 2005
|
ASBESTOS-CEMENT TRANSMISSION PIPE, 18 IN. THROUGH 42 IN. (450 MM THROUGH 1,050 MM), FOR WATER SUPPLY SERVICE |
|
ASME PV CODE 9 : 2017
|
BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
|
ASTM G 8 : 1996
|
Standard Test Methods for Cathodic Disbonding of Pipeline Coatings |
|
ACI 318 : 2014
|
BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
|
BS EN 1465:2009
|
ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
|
AWS D10.8 : 1996
|
RECOMMENDED PRACTICES FOR WELDING OF CHROMIUM-MOLYBDENUM STEEL PIPING AND TUBING |
|
ISO 75:1987
|
Plastics and ebonite Determination of temperature of deflection under load |
|
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
|
ANSI/AWWA C200 : 2017
|
STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER |
|
ASTM D 543 : 2014 : REDLINE
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
|
ASTM E 384 : 2017 : REDLINE
|
Standard Test Method for Microindentation Hardness of Materials |
|
ASME B31.8 : 2016
|
Gas Transmission and Distribution Piping Systems |
|
ISO 15310:1999
|
Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method |
|
ANSI/AWWA C950:2013
|
FIBERGLASS PRESSURE PIPE |
|
ASME PCC 1 : 2013
|
GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY |
|
SSPC-SP 10 : 2015
|
NEAR-WHITE BLAST CLEANING |
|
API 620 : 2013
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
|
AWWA C906:2015
|
POLYETHYLENE (PE) PRESSURE PIPE AND FITTINGS, 4 IN. THROUGH 65 IN. (100 MM THROUGH 1,650 MM), FOR WATERWORKS |
|
BS EN 13121-2:2003
|
GRP tanks and vessels for use above ground Composite materials. Chemical resistance |
|
BS 2782-10 Method 1001:1977
|
METHODS OF TESTING PLASTICS - GLASS REINFORCED PLASTICS - MEASUREMENT OF HARDNESS BY MEANS OF A BARCOL IMPRESSOR |
|
AWWA C151/A21.51 : 2017
|
DUCTILE-IRON PIPE, CENTRIFUGALLY CAST |
|
ASME B31.3:2016
|
PROCESS PIPING |
|
CAN/CSA-Z662-15
|
Oil and gas pipeline systems |
|
ASME PV CODE 8 DIV 3 : 2017
|
BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
|
ASME B31.4 : 2016
|
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
|
ASME PV CODE 4 : 2017
|
BPVC Section IV-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF HEATING BOILERS |
|
API 510 : 2014
|
PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
|
ISO 11359-2:1999
|
Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
|
AWWA C150/A21.50 : 2014
|
THICKNESS DESIGN OF DUCTILE-IRON PIPE |
|
ASTM A 380 : 2006
|
Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
|
AWWA M11 : 2004
|
STEEL PIPE: A GUIDE FOR DESIGN AND INSTALLATION |
|
ANSI/AWWA C300 : 2016
|
REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
|
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
|
API 580 : 2016
|
RISK-BASED INSPECTION |
|
ISO 11357-2:2013
|
Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height |
|
ISO 8573-1:2010
|
Compressed air Part 1: Contaminants and purity classes |
|
AISC 316 : 9ED 89 ERRATA
|
ASD MANUAL OF STEEL CONSTRUCTION |
|
API 571 : 2011
|
DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
|
ASTM C 581 : 2015 : REDLINE
|
Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
|
ASME PV CODE 2D METRIC : 2017
|
BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC) |
|
ASNT CP 189 : 2016
|
QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
|
ASTM D 696 : 2016 : REDLINE
|
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
|
AWWA C302 : 2016
|
REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
|
API 660 : 2015
|
SHELL-AND-TUBE HEAT EXCHANGERS |
|
ANSI B74.13 : 2016
|
MARKINGS FOR IDENTIFYING GRINDING WHEELS AND OTHER BONDED ABRASIVES |
|
BS EN 59:2016
|
Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester |
|
ANSI B74.2 : 2003
|
SPECIFICATIONS FOR SHAPES AND SIZES OF GRINDING WHEELS, AND FOR SHAPES, SIZES AND IDENTIFICATION OF MOUNTED WHEELS |
|
ASTM D 790 : 2017 : REDLINE
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
|
ASME PV CODE 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
|
AWS B4.0M : 2000
|
STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
|
ISO 604:2002
|
Plastics — Determination of compressive properties |
|
SSPC-SP 6 : 2015
|
COMMERCIAL BLAST CLEANING |
|
AWWA C301 : 2014
|
PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
|
API 582 : 2016
|
WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES |
|
ASTM G 42 : 2011 : REDLINE
|
TEST METHOD FOR CATHODIC DISBONDING OF PIPELINE COATINGS SUBJECTED TO ELEVATED TEMPERATURES |
|
ASTM D 6641 : 2001
|
TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE |
|
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
|
ASTM D 648 : 2016
|
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
|
ASME PV CODE 5 : 2017
|
BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
|
AWWA D100 : 2011
|
WELDED CARBON STEEL TANKS FOR WATER STORAGE |
|
TEMA STANDARDS : 9ED 2007
|
STANDARDS OF THE TUBULAR EXCHANGER MANUFACTURERS ASSOCIATION |
|
API 570 : 2016
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
|
ASME PV CODE 2D CUSTOMARY : 2017
|
BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY) |
|
ISO 10952:2014
|
Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes and fittings Determination of the resistance to chemical attack for the inside of a section in a deflected condition |
|
AWS D1.1/D1.1M : 2015
|
STRUCTURAL WELDING CODE-STEEL |
|
API 650 : 2013
|
WELDED TANKS FOR OIL STORAGE |
|
API 579-1 : 2016
|
FITNESS-FOR-SERVICE |
|
SSPC-SP 5 : 2015
|
WHITE METAL BLAST CLEANING |
|
ASTM D 695 : 2015 : REDLINE
|
Standard Test Method for Compressive Properties of Rigid Plastics |
|
ISO 14126:1999
|
Fibre-reinforced plastic composites Determination of compressive properties in the in-plane direction |
|
ISO 24817:2017
|
Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
|
AWWA C303 : 2017
|
CONCRETE PRESSURE PIPE, BAR-WRAPPED, STEEL-CYLINDER TYPE |
|
ASTM D 2992 : 2012
|
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
|
NACE RP 01 88 : 0
|
DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES |
|
ASME PV CODE 2C : 2017
|
BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
|
ISO 178:2010
|
Plastics Determination of flexural properties |
|
ASME PV CODE 11 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR INSERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS |
|
AWS A4.2M/A4.2 : 1997
|
STANDARD PROCEDURE FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS WELD METAL |
|
AWWA C900 : 2016
|
POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM) |
|
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics |
|
AWS A3.0M/A3.0 : 2010
|
STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
|
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
|
ISO 13623:2017
|
Petroleum and natural gas industries — Pipeline transportation systems |
|
SSPC-SP 7 : 2015
|
BRUSH-OFF BLAST CLEANING |
|
ISO 868:2003
|
Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness) |
|
ISO 14129:1997
|
Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |