ASME PV CODE 2A : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END)
Hardcopy
05-12-2018
English
01-07-2017
List of Sections
Foreword
Statement of Policy on the Use of the Certification Mark and Code
Authorization in Advertising
Statement of Policy on the Use of ASME Marking to Identify
Manufactured Items
Submittal of Technical Inquiries to the Boiler and Pressure Vessel
Standards Committees
Personnel
ASTM Personnel
Preface
Specifications Listed by Materials
Specification Removal
Summary of Changes
List of Changes in Record Number Order
Cross-Referencing and Stylistic Changes in the Boiler and Pressure
Vessel Code
Mandatory Appendix I - Standard Units for Use in Equations
Mandatory Appendix II - Basis for Use of Acceptable ASME, ASTM,
and Non-ASTM Editions
Mandatory Appendix III - Guidelines on Multiple Marking of Materials
Mandatory Appendix IV - Guidelines on the Approval of New Materials
Under the ASME Boiler and
Pressure Vessel Code
Nonmandatory Appendix A - Sources of Standards
Provides mandatory requirements, specific prohibitions, and Nonmandatory guidance for construction activities and inservice inspection and testing activities. Major Changes in the 2017 Edition - Over thirty-five ASTM Specifications Adopted into the 2017 Edition - Seven International Material Specifications Adopted into the 2017 Edition - ASTM Specifications Adopted into the 2017 Edition of Section II, Part A.
| DocumentType |
Standard
|
| Pages |
1764
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| MIL-B-16220 Revision F:1988 | BOILER, STEAM, LOW PRESSURE, FIRETUBE |
| API 578 : 2018 | GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS |
| API 526 RUSSIAN : 2009 | FLANGED STEEL PRESSURE RELIEF VALVES |
| API 538 : 2015 | INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE |
| API 7NRV : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
| UNE-EN ISO 21028-1:2017 | Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016) |
| API TR 938-B : 2008 | USE OF 9CR-1MO-V (GRADE 91) STEEL IN THE OIL REFINING INDUSTRY |
| API 579-1 : 2016 | FITNESS-FOR-SERVICE |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| API TR 934-G : 2016 | DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS |
| API 611 : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 934-C : 2008 | MATERIALS AND FABRICATION OF 1 [1/4]CR-[1/2]MO STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICE OPERATING AT OR BELOW 825 DEGREES F (441 DEGREES C) |
| EN ISO 21028-1:2016 | Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016) |
| PIP VESLP001 : 2012 | LOW-PRESSURE, WELDED VESSEL SPECIFICATION |
| PIP VESAC001 : 2016 | AIR-COOLED HEAT EXCHANGER SPECIFICATION (SUPPLEMENT TO API STD 661, 7TH EDITION) |
| PIP VESEH001 : 2016 | ELECTRIC IMMERSION PROCESS HEATER SPECIFICATION |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| API 934-A : 2008 | MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
| API 611 : 2008 : R2014 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 7NRV CHINESE : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| MSS SP 105 : 2016 | INSTRUMENT VALVES FOR CODE APPLICATIONS |
| ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
| PIP VECV1001 : 2017 | DESIGN CRITERIA AND PURCHASING REQUIREMENTS FOR VESSELS ASME CODE SECTION 8, DIVISIONS 1 AND 2 |
| ASME FFS 1 : 2007 | FITNESS-FOR-SERVICE |
| API 7NRV : 2006 : R2012 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| ANS 40.35 : 1991 | VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE |
| API 920 : 1990 | PREVENTION OF BRITTLE FRACTURE OF PRESSURE VESSELS |
| NACE 8X194 : 2006 | MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
| EN ISO 16812:2007 | Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007) |
| API TR 934-B : 2011 | FABRICATION CONSIDERATIONS FOR VANADIUM-MODIFIED CR-MO STEEL HEAVY WALL PRESSURE VESSELS |
| ASME PCC 1 : 2013 | GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| B620-14 (R2019) | Highway tanks and TC portable tanks for the transportation of dangerous goods |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ISO 21028-1:2016 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C |
| ISO 16812:2007 | Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers |
| C22.2 NO. 165-17 | Electric boilers |
| ASTM A 358/A358M : 2015 : REDLINE | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| ASTM C 1062 : 2000 : R2014 | Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities |
| B622-14 (R2019) | Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2 |
| BS EN ISO 21028-1:2016 | Cryogenic vessels. Toughness requirements for materials at cryogenic temperature Temperatures below -80 °C |
| BS 8010-2.8:1992 | Code of practice for pipelines. Pipelines on land: design, construction and installation Steel for oil and gas |
| ASTM C 1062 : 2000 : R2008 | Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities |
| ASTM C 1062 : 2000 | Standard Guide for Design, Fabrication, and Installation of Nuclear Fuel Dissolution Facilities |
| API 578 REDLINE : 2010 | MATERIAL VERIFICATION PROGRAM FOR NEW AND EXISTING ALLOY PIPING SYSTEMS |
| ASME PV CODE 3 NH DIV 1 : 2015 | BOILER AND PRESSURE VESSEL CODE - RULES FOR THE CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - CLASS 1 COMPONENTS IN ELEVATED TEMPERATURE SERVICE |
| API 941 REDLINE : 2008 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| NBR 15209 : 2005 | CARGO TANK TRAILER FOR THE HYDROFLUORIC ACID TRANSPORTATION ANHYDROUS (100%) BULK LIQUID |
| API 526 REDLINE : 2009 | FLANGED STEEL PRESSURE-RELIEF VALVES |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| API 611 REDLINE : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| EN 10028-3:2017 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| NFA 36 215 : 1997 | STEEL PRODUCTS - FINE GRAIN WELDABLE STEELS FOR THE TRANSPORTATION OF DANGEROUS PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| EN 10222-2:2017 | Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
| EN 10025-2:2004/AC:2005 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| EN 10028-4:2017 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
| BIS IS 2062 : 2011(R2016) | HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL - SPECIFICATION |
| AS 1548-2008 | Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018) |
| EN 10217-1:2002/A1:2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.