ASNT SNT TC 1A : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy
04-12-2019
English
09-11-2012
Gives guidelines for employers to establish in-house certification programs for the qualification and certification of nondestructive testing personnel.
DevelopmentNote |
Bundled with ASNT CP 105 (2016). (05/2016)
|
DocumentType |
Standard
|
ISBN |
978-1-57117-379-9
|
Pages |
0
|
PublisherName |
American Society for Non-Destructive Testing
|
Status |
Superseded
|
SupersededBy |
API 19G1 CHINESE : 2010 | SIDE-POCKET MANDRELS |
API7-1 RUSSIAN-2006+ADD3-2011(R2015) | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
API 6H : 1998 : R2011 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
ASTM E 1219 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
ASTM A 1082/A1082M : 2016 : REDLINE | Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications |
API 5LCP RUSSIAN : 2012 | SPECIFICATION FOR COILED LINE PIPE |
API 687 : 2001 : R2009 | ROTOR REPAIR |
ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
06/30125909 DC : DRAFT OCT 2006 | ISO 13628-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
API 5L8 : 1996 | RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW LINE PIPE |
API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
ASTM E 273 : 2015 : REDLINE | Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
API 7-1 : 2006 : INC : ADD 3 : 2011 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
API 17P : 2013 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS |
API 5LCP :2006 | SPECIFICATION FOR COILED LINE PIPE |
ASTM B 773 : 1996 : R2008 | Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies (Withdrawn 2013) |
API 6DR : 2012 | RECOMMENDED PRACTICE FOR THE REPAIR AND REMANFACTURE OF PIPELINE VALVES |
API 5L REDLINE : 2007 | SPECIFICATION FOR LINE PIPE |
ANSI N14.5 : 2014 | RADIOACTIVE MATERIALS - LEAKAGE TESTS ON PACKAGES FOR SHIPMENT |
API 570 REDLINE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
08/30176215 DC : DRAFT JAN 2008 | BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
API 934-E : 2018 | RECOMMENDED PRACTICE FOR MATERIALS AND FABRICATION OF 1[1/4]CR-[1/2]MO STEEL PRESSURE VESSELS FOR SERVICE ABOVE 825 DEGREES F (440 DEGREES C) |
NACE RP 02 96 : 2004 | GUIDELINES FOR DETECTION, REPAIR, AND MITIGATION OF CRACKING OF EXISTING PETROLEUM REFINERY PRESSURE VESSELS IN WET H[2]S ENVIRONMENTS |
ASTM A 609/A609M : 2012 | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
12/30262118 DC | BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
BS 8562:2011 | Gas cylinders. In situ, non-destructive examination and testing of refillable seamless steel tubes of water capacity between 150 L and 3000 L, used for compressed gases Specification |
API STD 1104 SPANISH : 2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
ASTM E 1030 : 2005 : R2011 | Standard Test Method for Radiographic Examination of Metallic Castings |
BS ISO 11484:2009 | Steel products. Employers qualification system for non-destructive testing (NDT) personnel |
17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
API 6DSS : 2017-08 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
ASTM B 751 : 2008 : R2013 | Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube |
ASTM F 2895 : 2015 : REDLINE | Standard Practice for Digital Radiography of Cast Metallic Implants |
API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
API 1104 RUSSIAN : 2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
ASTM E 2700 : 2014 : REDLINE | Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
ASTM E 3100 : 2017 | Standard Guide for Acoustic Emission Examination of Concrete Structures |
API 6A CHINESE : 2011 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
API 5ST:2010 | SPECIFICATION FOR COILED TUBING |
API 4G : 2012 | OPERATION, INSPECTION, MAINTENANCE, AND REPAIR OF DRILLING AND WELL SERVICING STRUCTURES |
AWS D1.1/D1.1M PORTUGUESE : 2010 | STRUCTURAL WELDING CODE - STEEL |
API 11AX RUSSIAN : 13ED 2015 | SPECIFICATION FOR SUBSURFACE SUCKER ROD PUMP ASSEMBLIES, COMPONENTS, AND FITTINGS, THIRTEENTH EDITION |
API 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
API RP 2200 : 2015 | REPAIRING HAZARDOUS LIQUID PIPELINES |
API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
API 653 CHINESE : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
API 11B : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
DIN EN ISO 3183:2013-03 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
ASTM A 745/A745M : 2015 : REDLINE | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings |
API 20D : 2013 | NONDESTRUCTIVE EXAMINATION SERVICES FOR EQUIPMENT USED IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
AWS D14.1/D14.1M:2005 | SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL HANDLING EQUIPMENT |
AWS D17.1 : 2001 | SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
AWS D1.4/D1.4M : 2011 | STRUCTURAL WELDING CODE - REINFORCING STEEL |
AWS B5.1 : 2013 | SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTORS |
ASTM E 1030 : 2005 | Standard Test Method for Radiographic Examination of Metallic Castings |
AWS D1.5M/D1.5 : 2015 | BRIDGE WELDING CODE |
ASTM E 498 : 1995 : R2000 | Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
ASTM E 1118 : 2005 | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
I.S. EN ISO 17824:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
ASTM E 703 : 2014 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
ASTM E 1161 : 2009 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
SAE AS 6081 : 2012 | FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS |
API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
BS ISO 14104:2017 | Gears. Surface temper etch inspection after grinding, chemical method |
I.S. EN ISO 13628-15:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011) |
ASTM A 758/A758M : 2014 : REDLINE | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
ASTM E 1571 : 2011 : R2016 : EDT 1 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
ASTM F 846 : 1992 : R1998 | Standard Guide for Testing Performance of Amusement Rides and Devices |
ASTM E 498 : 1995 : R2006 | Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
ASTM E 543 : 2015 : REDLINE | Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 3045 : 2016 | Standard Practice for Crack Detection Using Vibroacoustic Thermography |
ASTM D 5339 : 1994 : R1998 | Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures (Withdrawn 2005) |
ASTM E 2984/E2984M : 2014 | Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
ASTM F 1512 : 1994 : R1999 | Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies |
ASTM B 773 : 1996 : R2002 : EDT 1 | Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies |
ASTM E 2983 : 2014 | Standard Guide for Application of Acoustic Emission for Structural Health Monitoring |
ASTM E 1955 : 2004 : R2009 | Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs |
ASTM E 1066 : 1995 : R2000 | Standard Test Method for Ammonia Colorimetric Leak Testing |
ASTM F 1512 : 1994 : R2003 | Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies |
ASTM E 2907/E2907M : 2013 | Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
UNI EN ISO 11960 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
ASTM E 494 : 2015 : REDLINE | Standard Practice for Measuring Ultrasonic Velocity in Materials |
ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
API 575 : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
ASTM E 1495/E1495M : 2017 : REDLINE | Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
ASTM E 1817 : 2008 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 1603/E1603M : 2011 : R2017 | Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
ASTM E 2581 : 2014 : REDLINE | Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
ASTM G 158 :1998 | Standard Guide for Three Methods of Assessing Buried Steel Tanks |
ASTM E 1312 : 2009 : R2013 : EDT 1 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
BS EN ISO 14310:2008 | Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
UNE-EN ISO 16148:2016 | Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016) |
BS EN ISO 11960:2014 | Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells |
ISO 20312:2011 | Petroleum and natural gas industries — Design and operating limits of drill strings with aluminium alloy components |
I.S. EN ISO 15463:2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
I.S. EN 14870-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
MIL-STD-410 Revision E:1991 | NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION AND CERTIFICATION (EDDY CURRENT, LIQUID PENETRANT, MAGNETIC PARTICLE, RADIOGRAPHIC AND ULTRASONIC) |
ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
API 5L8 : 1996 : R2015 | RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW LINE PIPE |
API 650 CHINESE : 2013 | WELDED TANKS FOR OIL STORAGE |
API TR 938-B : 2008 | USE OF 9CR-1MO-V (GRADE 91) STEEL IN THE OIL REFINING INDUSTRY |
API 5L RUSSIAN : 2012 | SPECIFICATION FOR LINE PIPE |
API 92U : 2008 | UNDERBALANCED DRILLING OPERATIONS |
API 92U : 2008 : R2013 | UNDERBALANCED DRILLING OPERATIONS |
03/301625 DC : DRAFT JAN 2003 | BS EN ISO 10424-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 1: SPECIFICATION FOR ROTARY DRILLING EQUIPMENT |
10/30238376 DC : 0 | BS 8562 - GAS CYLINDERS IN-SITU EXAMINATION AND TESTING OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3 000 L, USED FOR COMPRESSED GASES SPECIFICATION |
08/30166039 DC : DRAFT JUNE 2008 | BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS |
API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
ASTM A 376/A376M : 2017 : REDLINE | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service |
ASTM E 309 : 2016 : REDLINE | Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
ASTM B 548 : 2003 : R2009 | Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
AWS WHC4.09 : 0 | MATERIALS AND APPLICATION - PART 1 - WELDING HANDBOOK, 9TH EDITION, VOLUME 4 - CHAPTER 9: MAINTENANCE AND REPAIR WELDING |
BIS IS/ISO 3183 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
API 6A REDLINE : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
API 16C CHINESE : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
ASTM E 1209 : 2010 | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
NACE SP 01 99 : 2009 | INSTALLATION OF STAINLESS CHROMIUM-NICKEL STEEL AND NICKEL-ALLOY ROLL-BONDED AND EXPLOSION-BONDED CLAD PLATE IN AIR POLLUTION CONTROL EQUIPMENT |
BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
AISC 360 : 2016 | SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS |
API 16C RUSSIAN : 1993 | SPECIFICATION FOR CHOKE AND KILL SYSTEMS |
API 5A5 : 2005 : INC : ERR 1 : 2009 : R2010 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
ASTM C 1331 : 2018 : REDLINE | Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
AWS B1.10M/B1.10:2016 | GUIDE FOR THE NONDESTRUCTIVE EXAMINATION OF WELDS |
NACE 8X194 : 2006 | MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
ASTM F 1430/F1430M : 2018 : REDLINE | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
UNI EN ISO 13628-15 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
API 5A5 CHINESE : 2005 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
ASTM A 609/A609M : 2012 : R2018 | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
DI-NDTI-81936 Base Document:2013 | NON-DESTRUCTIVE TESTING TRAINING PROGRAM |
ANSI/AWWA D107-16 ERR 1(CSV) | COMPOSITE ELEVATED TANKS FOR WATER STORAGE |
11/30253360 DC : 0 | BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
API 6DSS REDLINE : 2009 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
ASTM E 2928/E2928M : 2017 : REDLINE | Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique |
BS EN ISO 13628-15:2011 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds |
API 577 : 2013 | WELDING PROCESSES, INSPECTION, AND METALLURGY |
ASTM E 2024 : 2005 | Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
MIL-STD-2032 Base Document:1990 | EDDY CURRENT INSPECTION OF HEAT EXCHANGER TUBING ON SHIPS OF THE UNITED STATES NAVY |
08/30190263 DC : DRAFT SEP 2008 | BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
BS ISO 17824 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
BS 7730:1994 | Method for liquid penetrant inspection of metallic surgical implants |
ASTM F 914 : 2003 | Standard Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments |
ASTM E 1955 : 2004 : R2014 | Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM <astmref rid="a00002"/> Reference Radiographs |
ASTM E 569/E569M : 2013 : REDLINE | Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
SAE AMS 2631 : 2017 | ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE |
ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
ISO 10433:1994 | Petroleum and natural gas industries — Drilling and production equipment — Specification for wellhead surface safety valves and underwater safety valves for offshore service |
ASTM E 751/E751M : 2017 : REDLINE | Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
ASTM E 1931 : 2016 : REDLINE | Standard Guide for Non-computed X-Ray Compton Scatter Tomography |
ASTM A 880 : 1995 | Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004) |
AWS B5.17:2014 | SPECIFICATION FOR THE QUALIFICATION OF WELDING FABRICATORS |
ASTM E 1000 : 2016 : REDLINE | Standard Guide for Radioscopy |
API 2C RUSSIAN : 2004 | SPECIFICATION FOR OFFSHORE PEDESTAL MOUNTED CRANES |
AWS WI : 2015 | WELDING INSPECTION HANDBOOK, FOURTH EDITION |
ASTM A 858/A858M : 2014 : REDLINE | Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service |
ASTM E 588 : 2003 : R2014 | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
I.S. EN ISO 20312:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATING LIMITS OF DRILL STRINGS WITH ALUMINIUM ALLOY COMPONENTS (ISO 20312:2011) |
AWS D14.5 : 1997 | SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS |
AWS D1.2/D1.2M : 2014 | STRUCTURAL WELDING CODE - ALUMINUM |
API 934-A : 2008 | MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
ASTM E 1255 : 2016 : REDLINE | Standard Practice for Radioscopy |
API SPEC 4F : 2013 | SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURES |
EN ISO 11961:2008/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
ASTM E 1496 : 2005 : R2010 | Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012) |
ISO 15590-1:2009 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends |
ASTM B 751 : 2008 | Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube |
EN ISO 3183:2012/A1:2018 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
ASTM E 1418 : 2016 : REDLINE | Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
API 19G1 : 2010 | SIDE-POCKET MANDRELS |
ASTM B 548 : 2003 : R2017 | Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
ASTM E 1359 : 2017 : REDLINE | Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies |
ASTM A 435/A435M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
ASTM E 2598 : 2007 | Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
ASTM F 1430 : 2003 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
ASTM E 749/E749M : 2017 : REDLINE | Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
ASTM E 2479 : 2016 : REDLINE | Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<inf>CR</inf>) Waves |
ASTM E 1496 : 2005 | Standard Test Method for Neutron Radiographic Dimensional Measurements |
ASTM E 1210 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
ASTM E 498/E498M : 2011 : R2017 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
ASTM E 3024/E3024M : 2016 | Standard Practice for Magnetic Particle Testing for General Industry |
ASTM G 158 : 1998 : R2004 | Standard Guide for Three Methods of Assessing Buried Steel Tanks |
ASTM E 1888/E1888M : 2017 : REDLINE | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
ASTM F 1797 : 2018 : REDLINE | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks |
ASTM A 420/A420M : 2016 : REDLINE | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
BS EN ISO 13535:2001 | Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment Hoisting equipment |
ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
I.S. EN ISO 10423:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
I.S. EN ISO 19902:2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
I.S. EN 13942:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
I.S. EN ISO 14723:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
I.S. EN ISO 14310:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
ABMA B3.1 : 1992 | AMERICAN NATIONAL STANDARD FOR ROLLING ELEMENT BEARINGS - AIRCRAFT ENGINE, ENGINE GEARBOX, AND ACCESSORY APPLICATIONS - EDDY CURRENT INSPECTION |
I.S. EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
EN ISO 19902:2007/A1:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES (ISO 19902:2007/AMD 1:2013) |
I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
UNI EN 14870-1 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS |
UNI EN ISO 14998 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
ASME PCC 2 : 2015 | REPAIR OF PRESSURE EQUIPMENT AND PIPING |
ASTM E 588 : 2003 : R2009 | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
AWS C3.8 : 90(R1998) | RECOMMENDED PRACTICES FOR ULTRASONIC INSPECTION OF BRAZED JOINTS |
API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
API 7G-2 SPANISH : 2009 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
API 5LCP CHINESE : 2007 | SPECIFICATION FOR COILED LINE PIPE |
MIL-HDBK-1823 Revision A:2009 | NONDESTRUCTIVE EVALUATION SYSTEM, RELIABILITY ASSESSMENT |
API 5CRA CHINESE : 2011 | SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
MSS SP 94 : 2015 | QUALITY STANDARD FOR FERRITIC AND MARTENSITIC STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - ULTRASONIC EXAMINATION METHOD |
11/30235499 DC : 0 | BS EN ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
API 11BR : 2008 : R2015 | RECOMMENDED PRACTICE FOR THE CARE AND HANDLING OF SUCKER RODS |
ASTM E 214 : 2005 | Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves (Withdrawn 2007) |
ASTM E 588 : 2003 | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
API 7-1 SPANISH : 2006 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
IEEE 1630-2012 | IEEE Standard for Supporting Structures for Overhead Contact Systems for Transit Systems |
API 16RCD RUSSIAN : 2005 | SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES |
ASTM E 690 : 2015 : REDLINE | Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
API 7-1 : 2006 : ADD 3:2011(R2015) | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
ASTM E 1220 : 2016 : REDLINE | Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
ASTM E 499/E499M : 2011 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode <a href="#fn00002"></a> |
09/30172965 DC : 0 | BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS |
SAE J 420 : 2018 | MAGNETIC PARTICLE INSPECTION |
NACE RP 01 99 : 2004 | INSTALLATION OF STAINLESS CHROMIUM-NICKEL STEEL AND NICKEL-ALLOY ROLL-BONDED AND EXPLOSION-BONDED CLAD PLATE IN AIR POLLUTION CONTROL EQUIPMENT |
13/30269192 DC : 0 | BS ISO 14104 - GEARS - SURFACE TEMPER ETCH INSPECTION AFTER GRINDING |
ASTM A 790/A790M : 2018 : REDLINE | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
BS EN ISO 10407-2:2008 | Petroleum and natural gas industries. Rotary drilling equipment Inspection and classification of used drill stem elements |
API 653 REDLINE : 2009 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
ASTM E 1118/E1118M : 2016 : REDLINE | Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
API 5L CHINESE : 2012 | SPECIFICATION FOR LINE PIPE |
BS EN ISO 17824:2014 | Petroleum and natural gas industries. Downhole equipment. Sand screens |
BS 7731:1994 | Method for radiographic examination of cast metallic surgical implants |
10/30216306 DC : 0 | BS ISO 12490 - PETROLEUM AND NATURAL GAS INDUSTRIES - ACTUATION MECHANICAL INTEGRITY AND SIZING FOR PIPELINE VALVES |
API 11BR:2008 | RECOMMENDED PRACTICE FOR THE CARE AND HANDLING OF SUCKER RODS |
API 7G-2 : 2009 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
MIL-HDBK-349 Base Document:1994 | MANUFACTURE AND INSPECTION OF ADHESIVE BONDED, ALUMINUM HONEYCOMB SANDWICH ASSEMBLIES FOR AIRCRAFT |
API 5ST : 2010 : R2015 | SPECIFICATION FOR COILED TUBING |
AWS B5.4 : 2005 | SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES |
04/19985213 DC : DRAFT NOV 2004 | ISO 19902 - PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
ASTM E 1817 : 2008 : R2014 | Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
MIL STD 1693 : A NOTICE 2 | FABRICATION WELDING AND INSPECTION OF HYPERBARIC CHAMBERS AND OTHER CRITICAL LAND BASED STRUCTURES |
SAE J 1267 : 2018 | LEAKAGE TESTING |
API 5UE :2005 | RECOMMENDED PRACTICE FOR ULTRASONIC EVALUATION OF PIPE IMPERFECTIONS |
ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
ASTM E 2930 : 2013 | Standard Practice for Pressure Decay Leak Test Method |
API 2A LRFD : 1993 | RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN |
API 7-1 : 2006 : INC : ADD 3 : 2011 : R2015 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
SAE ARP 4402 : 2013 | EDDY CURRENT INSPECTION OF OPEN FASTENER HOLES IN ALUMINUM AIRCRAFT STRUCTURE |
API 570 CHINESE : 2009 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
API 5C8 : 2017 | CARE, MAINTENANCE, AND INSPECTION OF COILED TUBING |
API 7 : 2001 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
API 11D1 CHINESE : 2009 | PACKERS AND BRIDGE PLUGS |
ASTM E 797/E797M : 2015 : REDLINE | Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
ASTM E 1962 : 2014 : REDLINE | Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
API SPEC 11AX : 2015 | SPECIFICATION FOR SUBSURFACE SUCKER ROD PUMP ASSEMBLIES, COMPONENTS, AND FITTINGS |
ASTM E 1030/E1030M : 2015 : REDLINE | Standard Practice for Radiographic Examination of Metallic Castings |
ASTM E 2985/E2985M : 2014 | Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy |
ASTM A 999/A999M : 2018 : REDLINE | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
API 6AR : 1994 | RECOMMENDED PRACTICE FOR REPAIR AND REMANUFACTURE OF WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
ASTM B 773 : 1996 | Standard Guide for Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies |
ASTM E 2981 : 2015 | Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
N285.0-17/N285.6 SERIES-17 | General requirements for pressure-retaining systems and components in CANDU nuclear power plants / Material Standards for reactor components for CANDU nuclear power plants |
ASTM E 1067/E1067M : 2018 : REDLINE | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
ASTM E 493/E493M : 2011 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
SAE AMS 2633 : 2017 | ULTRASONIC INSPECTION, CENTRIFUGALLY-CAST, CORROSION-RESISTANT STEEL TUBULAR CYLINDERS |
API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
ASTM F 1430 : 2003 : EDT 1 | Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments |
ASTM E 2580 : 2017 : REDLINE | Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM E 2191/E2191M : 2016 : REDLINE | Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
ASTM E 1742/E1742M : 2018 : REDLINE | Standard Practice for Radiographic Examination |
ASTM E 498/E498M : 2011 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode <a href="#fn00002"></a> |
ASTM E 2884 : 2017 : REDLINE | Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays |
ASTM E 1961 : 2016 : REDLINE | Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
ASTM F 846 : 1992 : R2009 | Standard Guide for Testing Performance of Amusement Rides and Devices (Withdrawn 2013) |
ASTM E 1211/E1211M : 2017 : REDLINE | Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
ASTM E 1161 : 2009 : R2014 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
ASTM A 966/A966M : 2015 : REDLINE | Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current |
UNI EN ISO 11961 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
EN 13942:2009/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
EN 13942:2009 | Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified) |
EN ISO 15463:2003/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
DIN EN ISO 11960:2014-05 | Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
BS EN ISO 14693:2003 | Petroleum and natural gas industries. Drilling and well-servicing equipment |
BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
NASA SPEC 5004A : 2003 | WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES |
NASA PRC 0001 : 2012 | PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF ALUMINUM ALLOY HARDWARE |
NASA PRC 6510 : 2011 | PROCESS SPECIFICATION FOR ULTRASONIC INSPECTION OF WELDS |
NASA STD 8719.9 : 2015 | LIFTING STANDARD |
NASA PRC 6506 : 2011 | PROCESS SPECIFICATION FOR LIQUID PENETRANT INSPECTION |
NASA PRC 6505 : 2011 | PROCESS SPECIFICATION FOR MAGNETIC PARTICLE INSPECTION |
NASA PRC 0015 : 2016 | PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF TITANIUM AND TITANIUM ALLOY HARDWARE |
NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
EN ISO 16148:2016 | Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016) |
UNI EN ISO 13680 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS |
NASA SSTD 8070 0069 : 2008 | LOW PRESSURE VACUUM JACKETED PIPE |
NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
NASA PRC 0010 : 2012 | PROCESS SPECIFICATION FOR AUTOMATIC AND MACHINE ARC WELDING OF STEEL AND NICKEL ALLOY HARDWARE |
NASA PRC 0005 : 2012 | PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF CARBON STEEL AND NICKEL ALLOY HARDWARE |
EN ISO 13680:2010 | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010) |
NASA PRC 6503 : 2011 | PROCESS SPECIFICATION FOR RADIOGRAPHIC INSPECTION |
NASA PRC 0002 : 2012 | PROCESS SPECIFICATION FOR THE MANUAL ARC WELDING OF TITANIUM ALLOY HARDWARE |
API 7K : 2015+ERR 2:2016 | DRILLING AND WELL SERVICING EQUIPMENT |
NASA PRC 0014 : 2012 | PROCESS SPECIFICATION FOR FRICTION STIR WELDING |
I.S. EN ISO 16148:2016 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBE - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING (ISO 16148:2016) |
UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
UNI EN ISO 17078-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
UNI EN 13942 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
UNI EN ISO 15463 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIELD INSPECTION OF NEW CASING, TUBING AND PLAIN-END DRILL PIPE |
UNI EN ISO 20312 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATING LIMITS OF DRILL STRINGS WITH ALUMINIUM ALLOY COMPONENTS |
API 6RS : 1ED 90 SUPP 1 | BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT |
EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
UNI EN ISO 14310 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
EN 14870-1:2011 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) |
ASTM E 215 : 2016 : REDLINE | Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
API 2CCU : 2017 | OFFSHORE CARGO CARRYING UNITS |
AWS D14.4/D14.4M : 2012 | SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT |
API 2SC : 2010 | MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
MSS SP 147 : 2014 | QUALITY STANDARD FOR STEEL CASTINGS USED IN STANDARD CLASS STEEL VALVES - SAMPLING METHOD FOR EVALUATING CASTING QUALITY |
ASTM E 114 : 2015 : REDLINE | Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
ISO 9584:1993 | Implants for surgery — Non-destructive testing — Radiographic examination of cast metallic surgical implants |
ASTM E 1312 : 2009 | Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
ASTM F 1512 : 1994 : R2011 | Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies (Withdrawn 2020) |
00/716712 DC : DRAFT NOV 2000 | BS EN ISO 13626 - DRILLING AND PRODUCTION EQUIPMENT - SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURE |
API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
API RP 11BR CHINESE : 2008 | RECOMMENDED PRACTICE FOR THE CARE AND HANDLING OF SUCKER RODS |
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
API 1169 : 2013 | RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
ASTM A 275/A275M : 2015-05 | PRACTICE FOR MAGNETIC PARTICLE EXAMINATION OF STEEL FORGINGS |
API SPEC 11B CHINESE : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
API 5LCP : 2006 : INC : ERR 1 : 2007 : R2012 | SPECIFICATION FOR COILED LINE PIPE |
API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
ASTM E 587 : 2015 : REDLINE | Standard Practice for Ultrasonic Angle-Beam Contact Testing |
ASTM A 418/A418M : 2015 : REDLINE | Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
API 5L8 RUSSIAN : 1996 | RECOMMENDED PRACTICE FOR FIELD INSPECTION OF NEW LINE PIPE |
API RP 2611 : 2011 | TERMINAL PIPING INSPECTION - INSPECTION OF IN-SERVICE TERMINAL PIPING SYSTEMS |
ASTM E 1603/E1603M : 2011 | Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
SAE AMS 2634 : 2013 | ULTRASONIC INSPECTION, THIN WALL METAL TUBING |
ASTM E 3052 : 2016 | Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array |
API 7-1:2006 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
API SPEC 19TT : 2016 | SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT |
API 5CT METRIC : 1995 | SPECIFICATION FOR CASING AND TUBING (METRIC UNITS) |
ASTM G 158 : 1998 : R2010 | Standard Guide for Three Methods of Assessing Buried Steel Tanks |
SAE AMS I 83387 : 2016 | INSPECTION PROCESS, MAGNETIC RUBBER |
00/707848 DC : DRAFT APR 2000 | EN ISO 14723 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - SUBSEA PIPELINE VALVES |
AWS D14.5/D14.5M:2009 | SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS |
13/30217541 DC : 0 | BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT |
09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
MIL-STD-1699 Revision B:1992 | NONDESTRUCTIVE EVALUATION OF BUTT WELDS IN CRANE AND RAILROAD RAILS |
AWS C7.3 : 2016 | PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING |
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
API 11D1 REDLINE : 2009 | PACKERS AND BRIDGE PLUGS |
API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
ASTM E 1066 : 1995 : R2006 | Standard Test Method for Ammonia Colorimetric Leak Testing |
ASTM E 427 : 1995 : R2006 | Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode) (Withdrawn 2013) |
ASTM B 548 : 2003 | Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels |
ASTM E 2929 : 2013 | Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction |
ASTM E 1571 : 2011 | Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
ASTM E 493 : 2006 | Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
API 2X : 2004 : R2015 | RECOMMENDED PRACTICE FOR ULTRASONIC AND MAGNETIC EXAMINATION OF OFFSHORE STRUCTURAL FABRICATION AND GUIDELINES FOR QUALIFICATION OF TECHNICIANS |
NF EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
MSS SP 141 : 2012 | MULTI-TURN AND CHECK VALVE MODIFICATIONS |
ASTM E 1417/E1417M : 2016 : REDLINE | Standard Practice for Liquid Penetrant Testing |
07/30173429 DC : 0 | BS EN ISO 13628-1 AMD2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
ASTM E 2076/E2076M : 2015 : REDLINE | Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
API 11AX CHINESE : 2012 | SPECIFICATION FOR SUBSURFACE SUCKER ROD PUMPS AND FITTINGS |
API 92M : 2017 | MANAGED PRESSURE DRILLING OPERATIONS WITH SURFACE BACK-PRESSURE |
SAE J 427 : 2018 | PENETRATING RADIATION INSPECTION |
API 6DSS CHINESE : 2009 | SPECIFICATION FOR SUBSEA PIPELINE VALVES |
API 573 : 2013 | INSPECTION OF FIRED BOILERS AND HEATERS |
API 11V1 : 1995 : R2008 | SPECIFICATION FOR GAS LIFT EQUIPMENT |
API 620 CHINESE : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
API 687 : 2001 | ROTOR REPAIR |
API SPEC 5CRA : 2010 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
SAE AS 4787 : 2013 | EDDY CURRENT INSPECTION OF CIRCULAR HOLES IN NONFERROUS METALLIC AIRCRAFT ENGINE HARDWARE |
API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
API 510 CHINESE : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
SAE J 426 : 2018 | LIQUID PENETRANT TEST METHODS |
API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
AWS D1.6 : 1999 ERRATA 1999 | STRUCTURAL WELDING CODE - STAINLESS STEEL |
UNI EN ISO 17824 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS |
ASTM E 664/E664M : 2015 : REDLINE | Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
ASTM E 1033 : 2013 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
NFPA 1904 : 1991 | AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS |
ASTM E 426 : 2016 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
API 620 REDLINE : 2008 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
ASTM E 2033 : 2017 : REDLINE | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
ASTM E 1774 : 2017 : REDLINE | Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
API 6D :2015 | SPECIFICATION FOR PIPELINE AND PIPING VALVES |
ASTM E 2076 : 2005 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
ASTM E 1212 : 2017 : REDLINE | Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies |
ASTM E 1814 : 2014 : REDLINE | Standard Practice for Computed Tomographic (CT) Examination of Castings |
ISA 67.01.01 : 2002 | TRANSDUCER AND TRANSMITTER INSTALLATION FOR NUCLEAR SAFETY APPLICATIONS |
ASTM F 846 : 1992 : R2003 | Standard Guide for Testing Performance of Amusement Rides and Devices |
ASTM E 1930/E1930M : 2017 : REDLINE | Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
ASTM E 2338 : 2017 : REDLINE | Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards |
ASTM G 158 : 1998 : R2016 | Standard Guide for Three Methods of Assessing Buried Steel Tanks |
ASTM B 361 : 2016 : REDLINE | Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings |
ASTM E 2375 : 2016 : REDLINE | Standard Practice for Ultrasonic Testing of Wrought Products |
ASTM E 1736 : 2015 : REDLINE | Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
ASTM F 914/F914M : 2018 : REDLINE | Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments |
ASTM E 493/E493M : 2011 : R2017 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
ISO 12490:2011 | Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves |
API 7K CHINESE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
API 7-1 : 2006/ADD 4 : 2019 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
API 650 : 2013+ADD 3 : 2018 | WELDED TANKS FOR OIL STORAGE |
EN ISO 13628-4:2010/AC:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
DIN EN ISO 16148:2016-09 | GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBES - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING (ISO 16148:2016) |
BS EN ISO 13680:2010 | Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
ISO 13680:2010 | Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions |
10/30148779 DC : DRAFT NOV 2010 | BS EN ISO 13628-8 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 8: REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
ISO 15463:2003 | Petroleum and natural gas industries Field inspection of new casing, tubing and plain-end drill pipe |
ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
ISO 17824:2009 | Petroleum and natural gas industries Downhole equipment Sand screens |
BS EN ISO 10424-1:2004 | Petroleum and natural gas industries. Rotary drilling equipment Rotary drill stem elements |
BS EN ISO 10417:2004 | Petroleum and natural gas industries. Subsurface safety valve systems. Design, installation, operation and redress |
BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
BS EN ISO 10423:2009 | Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
BS EN ISO 14723:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves |
ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
ISO 13535:2000 | Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
ISO 10417:2004 | Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress |
ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
ISO 14693:2003 | Petroleum and natural gas industries — Drilling and well-servicing equipment |
BS EN ISO 17078-1 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
ISO 16148:2016 | Gas cylinders Refillable seamless steel gas cylinders and tubes Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing |
ISO 13628-15:2011 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds |
ISO 17078-3:2009 | Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
BS EN ISO 15463:2003 | Petroleum and natural gas industries. Field inspection of new casing, tubing and plain-end drill pipe |
BS EN 13942:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves |
BS EN 14870-1:2011 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends |
ISO 17078-1:2004 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
EN ISO 10424-1:2004 | Petroleum and natural gas industries - Rotary drilling equipment - Part 1: Rotary drill stem elements (ISO 10424-1:2004) |
EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
EN ISO 14693:2003 | Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003) |
EN ISO 17824 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND SCREENS (ISO 17824:2009) |
EN ISO 14723:2009 | Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009) |
EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
EN ISO 10407-2:2008/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
EN ISO 13535:2000 | Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
EN ISO 13628-15:2011 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011) |
EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
EN ISO 10417:2004 | Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004) |
EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
EN ISO 20312:2011 | Petroleum and natural gas industries - Design and operating limits of drill strings with aluminium alloy components (ISO 20312:2011) |
API 92U : 2008 : INC : ADD 1 : 2015 : R201300 | UNDERBALANCED DRILLING OPERATIONS |
API STD 1104:2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
API RP 14B : 2015 | DESIGN, INSTALLATION, OPERATION, TEST, AND REDRESS OF SUBSURFACE SAFETY VALVE SYSTEMS |
API 5ST CHINESE : 2010 | SPECIFICATION FOR COILED TUBING |
API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
ASTM E 571 : 2012 : REDLINE | Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
AWWA D100 : 2011 | WELDED CARBON STEEL TANKS FOR WATER STORAGE |
API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
ASTM E 2863 : 2017 : REDLINE | Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization |
EN ISO 11960:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014) |
API RP 1177 : 2017 | RECOMMENDED PRACTICE FOR STEEL PIPELINE CONSTRUCTION QUALITY MANAGEMENT SYSTEMS |
API 2X : 2004 | RECOMMENDED PRACTICE FOR ULTRASONIC AND MAGNETIC EXAMINATION OF OFFSHORE STRUCTURAL FABRICATION AND GUIDELINES FOR QUALIFICATION OF TECHNICIANS |
API 570 : 2016 | PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
API 1104 PORTUGUESE : 2013 | WELDING OF PIPELINES AND RELATED FACILITIES |
API 4G CHINESE : 2012 | OPERATION, INSPECTION, MAINTENANCE, AND REPAIR OF DRILLING AND WELL SERVICING STRUCTURES |
AWS G1.6 : 2006 | SPECIFICATION FOR THE QUALIFICATION OF PLASTICS WELDING INSPECTORS FOR HOT GAS, HOT GAS EXTRUSION, AND HEATED TOOL BUTT THERMOPLASTIC WELDS |
05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
SAE AMS 2632 : 2008 | INSPECTION, ULTRASONIC, OF THIN MATERIALS 0.5 INCH (12.77 MM) AND UNDER IN CROSS-SECTIONAL THICKNESS |
BS ISO 12490:2011 | Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves |
ASTM E 2096/E2096M : 2016 : REDLINE | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
SAE AMS 2647F : 2017 | FLUORESCENT PENETRANT INSPECTION, AIRCRAFT AND ENGINE COMPONENT MAINTENANCE |
08/30180264 DC : DRAFT JUNE 2008 | BS EN 13942 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES |
ASTM E 499/E499M : 2011 : R2017 | Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode<rangeref></rangeref > |
ISO 14104:2017 | Gears — Surface temper etch inspection after grinding, chemical method |
13/30247752 DC : 0 | BS EN ISO 16148 - GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS AND TUBES - ACOUSTIC EMISSION EXAMINATION (AT) AND FOLLOW-UP ULTRASONIC EXAMINATION (UT) FOR PERIODIC INSPECTION AND TESTING |
ASTM A 898/A898M : 2017 : REDLINE | Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes |
API 510 : 2014 | PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
API 5CRA : 2010 : INC : ERR 1 : 2011 | SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK |
ASTM E 2906/E2906M : 2013 | Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles |
ASTM E 1955 : 2004 | Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs |
API SPEC 16RCD : 2015 | SPECIFICATION FOR ROTATING CONTROL DEVICES |
ASTM F 629 : 2015 : REDLINE | Standard Practice for Radiography of Cast Metallic Surgical Implants |
I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
ASTM E 1001 : 2016 : REDLINE | Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
ASTM E 499 : 1995 : R2006 | Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
ASTM A 831/A831M : 1995 : R2000 | Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components (Withdrawn 2005) |
I.S. EN ISO 3183:2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012) |
API 7-1 CHINESE : 2006 | SPECIFICATION FOR ROTARY DRILL STEM ELEMENTS |
07/30150187 DC : DRAFT AUG 2007 | BS ISO 17078-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING, PULLING, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
API 5UE : 2005 : INC : ADD 1 : 2009 : R2015 | RECOMMENDED PRACTICE FOR ULTRASONIC EVALUATION OF PIPE IMPERFECTIONS |
API 2200 REDLINE : 2010 | REPAIRING CRUDE OIL, LIQUEFIED PETROLEUM GAS, AND PRODUCT PIPELINES |
BS EN ISO 20312:2011 | Petroleum and natural gas industries. Design and operating limits of drill strings with aluminium alloy components |
CSA Z245.1 : 2014 | STEEL PIPE |
03/313799 DC : DRAFT AUG 2003 | ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS |
API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
API 574 : 2016 | INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS |
MSS SP 54 : 2013 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - RADIOGRAPHIC EXAMINATION METHOD |
API 11V1 :1995 | SPECIFICATION FOR GAS LIFT EQUIPMENT |
API 7NRV CHINESE : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
API 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
API 6H : 1998 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
API 5A5 : 2005 : INC : ERR 1 : 2009 : R2015 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
ASTM E 2261/E2261M : 2017 : REDLINE | Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
API 6DX : 2012 | ACTUATOR SIZING AND MOUNTING KITS FOR PIPELINE VALVES |
ASTM E 2373/E2373M : 2014 : REDLINE | Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
API 7G-2 : 2009 : INC : ERR 1 : 2009 : R2015 | RECOMMENDED PRACTICE FOR INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
API 687 : 2001 : R2015 | ROTOR REPAIR |
API 14B RUSSIAN : 2005 | DESIGN, INSTALLATION, REPAIR AND OPERATION OF SUBSURFACE SAFETY VALVE SYSTEMS |
API 5A5 : 2005 | FIELD INSPECTION OF NEW CASING, TUBING, AND PLAIN-END DRILL PIPE |
API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
ASTM E 1208 : 2016 : REDLINE | Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
API 577 CHINESE : 2013 | WELDING PROCESSES, INSPECTION AND METALLURGY |
API 7NRV : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
API 7NRV : 2006 : R2012 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
API 4F CHINESE : 2013 | SPECIFICATION FOR DRILLING AND WELL SERVICING STRUCTURES |
API 6H CHINESE : 1998 | SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS |
API TR 934-G : 2016 | DESIGN, FABRICATION, OPERATIONAL EFFECTS, INSPECTION, ASSESSMENT, AND REPAIR OF COKE DRUMS AND PERIPHERAL COMPONENTS IN DELAYED COKING UNITS |
API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
ASTM E 1004 : 2017 : REDLINE | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
UNI EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
ISA 67.01 : 1994 | TRANSDUCER AND TRANSMITTER INSTALLATION FOR NUCLEAR SAFETY APPLICATIONS |
API 934-C : 2008 | MATERIALS AND FABRICATION OF 1 [1/4]CR-[1/2]MO STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICE OPERATING AT OR BELOW 825 DEGREES F (441 DEGREES C) |
I.S. EN ISO 10407-2:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
SAE AS 6171/5 : 2016 | TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY RADIOLOGICAL TEST METHODS |
API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
MSS SP 93 : 2014 | QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - LIQUID PENETRANT EXAMINATION METHOD |
ASTM E 1570 : 2011 : REDLINE | PRACTICE FOR COMPUTED TOMOGRAPHIC (CT) EXAMINATION |
ASTM E 2698 : 2010 | Standard Practice for Radiological Examination Using Digital Detector Arrays |
ASTM E 2478 : 2011 : R2016 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
ASTM E 2905/E2905M : 2013 : REDLINE | PRACTICE FOR EXAMINATION OF MILL AND KILN GIRTH GEAR TEETH - ELECTROMAGNETIC METHODS |
ASTM E 2982 : 2014 | Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 499 : 1995 : R2000 | Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
ASTM E 1603 : 1999 | Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
ASTM E 2096 : 2005 | Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
ASTM A 939/A939M : 2015 : REDLINE | Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings |
ASTM E 427 : 1995 : R2000 | Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) |
UNI EN ISO 10407-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - ROTARY DRILLING EQUIPMENT - PART 2: INSPECTION AND CLASSIFICATION OF USED DRILL STEM ELEMENTS |
ASTM A 578/A578M : 2017 : REDLINE | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
ASTM A 577/A577M : 2017 : REDLINE | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
ASTM B 751 : 2008 : R2018 | Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube |
API 575 CHINESE : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
API 7K : 2015 | DRILLING AND WELL SERVICING EQUIPMENT |
API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
ASTM C 1332 : 2018 : REDLINE | Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
ASTM E 1139/E1139M : 2017 : REDLINE | Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
ASTM E 1606 : 2015 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
ASTM E 2478 : 2011 | Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
API 7K REDLINE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
EN ISO 17078-2:2007/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
EN ISO 17078-1:2004/A1:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
EN ISO 13533:2001/AC:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
ISO 14723:2009 | Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves |
BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
ISO 10424-1:2004 | Petroleum and natural gas industries Rotary drilling equipment Part 1: Rotary drill stem elements |
ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
BS EN ISO 16148:2016 | Gas cylinders. Refillable seamless steel gas cylinders and tubes. Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing |
UNI EN ISO 19902 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - FIXED STEEL OFFSHORE STRUCTURES |
I.S. EN ISO 17078-1:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
ASME NQA 2 : 89 SPECIAL NOTICE | QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR FACILITY APPLICATIONS |
ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.