Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM A 240/A240M : 2011

NA
NA

Status of Standard is Unknown

Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

28-03-2011

1.1 This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 This specification is expressed in both inch-pound and SI units. However, unless the order specifies the applicable M specification designation (SI units), the material shall be furnished in inch-pound units.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
A 01
DocumentType
Standard
Pages
13
PublisherName
American Society for Testing and Materials
Status
NA
SupersededBy
Supersedes

ASTM A 928/A928M : 2014 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
ASTM C 1277 : 2020 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
ASTM F 2645 : 2016 Standard Specification for Bun Slicing Machines
ASTM F 821/F821M : 2001 : R2018 Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine
ASTM F 1047 : 2017 Standard Specification for Frying and Braising Pans, Tilting Type
ASTM C 1861 : 2020 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
ASTM A 666 : 2015 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
ASTM D 3603 : 2020 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
ASTM F 825 : 1993 : R2017 Standard Specification for Drawers, Furniture, Marine, Steel
ASTM F 1267 : 2018 Standard Specification for Metal, Expanded, Steel
ASTM B 506 : 2016 Standard Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
ASTM D 665 : 2019 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
ASTM F 1602 : 2012 : R2017 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
ASTM D 5977 : 2015 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
ASTM A 358/A358M : 2019 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASTM C 692 : 2013 : R2018 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
ASTM F 1150 : 2016 Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
ASTM D 3966/D3966M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Lateral Load
ASTM F 824 : 1993 : R2017 Standard Specification for Tables, Mess, Marine, Steel
ASTM F 3110 : 2014 : R2018 Standard Practice for Proper Use of Mechanical Trenchless Point Repair Sleeve with Locking Gear Mechanism for Pipes of Varying Inner Diameter and Offset Joints
ASTM F 2332 : 2006 : R2013 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
ASTM F 1237 : 2015 Standard Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing (Withdrawn 2021)
ASTM C 1423 : 2016 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
ASTM F 2643 : 2020 Standard Specification for Powered Pot, Pan and Utensil Washing Sinks
ASTM F 859 : 2015 Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type
ASTM B 625 : 2017 Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip
ASTM A 264 : 2012 : R2019 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
ASTM F 857 : 2017 Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
ASTM D 5534 : 1994 : R2018 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
ASTM F 1202 : 2016 Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
ASTM C 1644 : 2006 : R2017 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
ASTM C 1696 : 2020 Standard Guide for Industrial Thermal Insulation Systems
ASTM A 774/A774M : 2014 : R2019 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
ASTM F 2098 : 2018 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings
ASTM C 1802 : 2020 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
ASTM F 1203 : 2016 Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
ASTM D 972 : 2016 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
ASTM D 2878 : 2010 : R2016 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
ASTM A 947M : 2016 Standard Specification for Textured Stainless Steel Sheet [Metric]
ASTM C 921 : 2010 : R2015 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021)
ASTM F 1217 : 2017 Standard Specification for Cooker, Steam
ASTM C 852/C852M : 2017 Standard Guide for Design Criteria for Plutonium Gloveboxes
ASTM A 1069/A1069M : 2019 Standard Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes
ASTM F 1966 : 2012 : R2017 : EDT 1 Standard Specification for Dough Divider and Rounding Machines
ASTM D 942 : 2019 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
ASTM F 1114 : 2016 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Stationary Rack Type Water-Driven Rotary Spray
ASTM F 2646 : 2016 Standard Specification for Bread Slicing Machines
ASTM C 1540 : 2020 Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
ASTM F 1073 : 2019 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM C 1767 : 2019 Standard Specification for Stainless Steel Jacketing for Insulation
ASTM A 778/A778M : 2016 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
ASTM D 2595 : 2017 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
ASTM F 2891 : 2015 : R2020 : EDT 1 Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated
ASTM F 1604 : 2015 : R2020 : EDT 1 Standard Specification for Freezers, Ice Cream, Soft Serve, Shake
ASTM F 1360 : 2017 Standard Specification for Ovens, Microwave, Electric
ASTM C 1173 : 2018 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
ASTM C 1572/C1572M : 2018 Standard Guide for Dry Lead Glass and Oil-Filled Lead Glass Radiation Shielding Window Components for Remotely Operated Facilities
ASTM F 1603 : 2017 Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
ASTM A 263 : 2012 : R2019 Standard Specification for Stainless Chromium Steel-Clad Plate
ASTM C 1533 : 2015 Standard Guide for General Design Considerations for Hot Cell Equipment
ASTM C 1767M : 2019 Standard Specification for Stainless Steel Jacketing for Insulation
ASTM D 4054 : 2020 : REV C Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
ASTM C 425 : 2004 : R2018 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
ASTM F 1387 : 2019 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
ASTM F 1910 : 1998 : R2018 Standard Specification for Long Barbed Tape Obstacles
ASTM A 480/A480M : 2020 : REV A Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM F 1511 : 2018 Standard Specification for Mechanical Seals for Shipboard Pump Applications

View more information
$135.86
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more