ASTM A 915/A915M : 2008 : R2013

Name: ASTM A 915/A915M : 2008 : R2013
Brand: ASTM
Price: 108.03 AUD

Superseded

View Superseded by

Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

Available format(s)

Hardcopy , PDF

Superseded date

05-09-2020

Language(s)

English

Published date

01-04-2013

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 01.02, 2017 Defines carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades.

1.1This specification covers carbon and low alloy steel castings having chemical analyses similar to that of the standard wrought grades.

1.2Several grades are covered and are designated by chemical composition shown in Table 1.

TABLE 1 Chemical Composition (weight, percent)

Grade	C	Mn	P, max	S, max	Si	Ni	Cr	Mo

SC 1020 (J02003)	0.18/0.23	0.40/0.80	0.040	0.040	0.30/0.60	. . .	. . .	. . .
SC 1025 (J02508)	0.22/0.28	0.40/0.80	0.040	0.040	0.30/0.60	. . .	. . .	. . .
SC 1030 (J03012)	0.28/0.34	0.50/0.90	0.040	0.040	0.30/0.60	. . .	. . .	. . .
SC 1040 (J04003)	0.37/0.44	0.50/0.90	0.040	0.040	0.30/0.60	. . .	. . .	. . .
SC 1045 (J04502)	0.43/0.50	0.50/0.90	0.040	0.040	0.30/0.60	. . .	. . .	. . .
SC 4130 (J13502)	0.28/0.33	0.40/0.80	0.035	0.040	0.30/0.60	. . .	0.80/1.10	0.15/0.25
SC 4140 (J14045)	0.38/0.43	0.70/1.10	0.035	0.040	0.30/0.60	. . .	0.80/1.10	0.15/0.25
SC 4330 (J23259)	0.28/0.33	0.60/0.90	0.035	0.040	0.30/0.60	1.65/2.00	0.70/0.90	0.20/0.30
SC 4340 (J24053)	0.38/0.43	0.60/0.90	0.035	0.040	0.30/0.60	1.65/2.00	0.70/0.90	0.20/0.30
SC 8620 (J12095)	0.18/0.23	0.60/1.00	0.035	0.040	0.30/0.60	0.40/0.70	0.40/0.60	0.15/0.25
SC 8625 (J12595)	0.23/0.28	0.60/1.00	0.035	0.040	0.30/0.60	0.40/0.70	0.40/0.60	0.15/0.25
SC 8630 (J13095)	0.28/0.33	0.60/1.00	0.035	0.040	0.30/0.60	0.40/0.70	0.40/0.60	0.15/0.25

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3.1Within the text, the SI units are shown in brackets.

1.3.2Inch-pound units are applicable for material ordered to Specification A915 and SI units for material ordered to Specification A915M.

Committee	A 01
DocumentType	Standard
Pages	3
ProductNote	Reconfirmed 2018
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM A 915/A915M : 2008 : R2018
Supersedes	ASTM A 915/A915M : 2008 ASTM A 915/A915M : 2008