ASTM B 505/B505M : 2012 : REV A
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Specification for Copper Alloy Continuous Castings
Hardcopy , PDF
11-11-2014
English
01-10-2012
1.1 This specification establishes requirements for continuously cast rod, bar, tube, and shapes produced from copper alloys with nominal compositions as listed in Table 1.2
| Copper Alloy UNS | Designation | Composition, % | ||||||||||
| Copper | Tin | Lead | Zinc | Nickel | Aluminum | Iron | Manganese | Silicon | Phosphorus | Bismuth | ||
| C83600 | leaded red brass | 85 | 5 | 5 | 5 | ... | ... | ... | ... | ... | ... | ... |
| C83800 | leaded red brass | 82.9 | 3.8 | 6 | 6.5 | ... | ... | ... | ... | ... | ... | ... |
| C84200 | leaded semi-red brass | 80 | 5 | 2.5 | 13 | ... | ... | ... | ... | ... | ... | ... |
| C84400 | leaded semi-red brass | 80 | 2.9 | 7 | 8.5 | ... | ... | ... | ... | ... | ... | ... |
| C84800 | leaded semi-red brass | 76 | 2.5 | 6.2 | 15 | ... | ... | ... | ... | ... | ... | ... |
| C85700 | leaded naval brass | 61 | 1 | 1.2 | 36 | ... | ... | ... | ... | ... | ... | ... |
| C86200 | high-strength yellow brass | 63 | ... | ... | 25 | ... | 4 | 3 | 3.8 | ... | ... | ... |
| C86300 | high-strength yellow brass | 63 | ... | ... | 25 | ... | 6.2 | 3 | 3.8 | ... | ... | ... |
| C86500 | high-strength yellow brass | 57.5 | ... | ... | 39 | ... | 1 | 1.2 | 0.8 | ... | ... | ... |
| C87700 | silicon bronze | 88.5 | ... | ... | 8 | ... | ... | ... | ... | 3 | ... | ... |
| C87710 | silicon bronze | 86 | ... | ... | 10 | ... | ... | ... | ... | 4 | ... | ... |
| C87850 | silicon brass | 76 | ... | ... | 20.9 | ... | ... | ... | ... | 3 | 0.12 | ... |
| C89320 | bismuth tin bronze | 89 | 6 | ... | ... | ... | ... | ... | ... | ... | ... | 5.0 |
| C89720A | bismuth brass | 67.4 | 1 | ... | 29 | ... | 0.5 | ... | ... | 0.5 | ... | 1.5 |
| C90300 | tin bronze | 87.5 | 8.2 | ... | 4 | ... | ... | ... | ... | ... | ... | ... |
| C90500 | tin bronze | 87.5 | 10 | ... | 2 | ... | ... | ... | ... | ... | ... | ... |
| C90700 | tin bronze | 89 | 11 | ... | ... | ... | ... | ... | ... | ... | ... | ... |
| C91000 | tin bronze | 85 | 15 | ... | ... | ... | ... | ... | ... | ... | ... | ... |
| C91300 | tin bronze | 80.5 | 19 | ... | ... | ... | ... | ... | ... | ... | ... | ... |
| C92200 | leaded tin bronze | 88 | 6 | 1.5 | 4 | ... | ... | ... | ... | ... | ... | ... |
| C92300 | leaded tin bronze | 87 | 8.2 | 0.6 | 3.8 | ... | ... | ... | ... | ... | ... | ... |
| C92500 | nickel-phosphor bronze | 86.5 | 11 | 1.2 | ... | 1.2 | ... | ... | ... | ... | ... | ... |
| C92700 | leaded tin bronze | 87.5 | 10 | 1.8 | ... | ... | ... | ... | ... | ... | ... | ... |
| C92800 | leaded tin bronze | 80 | 16 | 5 | ... | ... | ... | ... | ... | ... | ... | ... |
| C92900 | leaded nickel-tin bronze | 84 | 10 | 2.6 | ... | 3.4 | ... | ... | ... | ... | ... | ... |
| C93200 | high-leaded tin bronze | 83 | 6.9 | 7 | 3 | ... | ... | ... | ... | ... | ... | ... |
| C93400 | high-leaded tin bronze | 83.5 | 8 | 8 | ... | ... | ... | ... | ... | ... | ... | ... |
| C93500 | high-leaded tin bronze | 84.5 | 5.2 | 9 | 1 | ... | ... | ... | ... | ... | ... | ... |
| C93600 | high-leaded tin bronze | 81 | 7 | 12 | ... | ... | ... | ... | ... | ... | ... | ... |
| C93700 | high-leaded tin bronze | 80 | 10 | 9.5 | ... | ... | ... | ... | ... | ... | ... | ... |
| C93800 | high-leaded tin bronze | 77 | 6.9 | 14.5 | ... | ... | ... | ... | ... | ... | ... | ... |
| C93900 | high-leaded tin bronze | 78 | 6 | 16 | ... | ... | ... | ... | ... | ... | ... | ... |
| C94000 | high-leaded tin bronze | 70.5 | 13 | 15 | ... | ... | ... | ... | ... | ... | ... | ... |
| C94100 | high-leaded tin bronze | 75.5 | 5.5 | 20 | ... | ... | ... | ... | ... | ... | ... | ... |
| C94300 | high-leaded tin bronze | 69.5 | 5.2 | 25 | ... | ... | ... | ... | ... | ... | ... | ... |
| C94700 | nickel-tin bronze | 87.5 | 5.2 | 0 | 1.8 | 5.2 | ... | ... | ... | ... | ... | ... |
| C94800 | leaded nickel-tin bronze | 86.5 | 5.2 | 0.6 | 1.8 | 5.2 | ... | ... | ... | ... | ... | ... |
| C95200 | aluminum bronze | 87.8 | ... | ... | ... | ... | 9 | 3.2 | ... | ... | ... | ... |
| C95300 | aluminum bronze | 88.8 | ... | ... | ... | ... | 10 | 1.2 | ... | ... | ... | ... |
| C95400 | aluminum bronze | 85.2 | ... | ... | ... | ... | 10.8 | 4 | ... | ... | ... | ... |
| C95410 | aluminum bronze | 83.2 | ... | ... | ... | 2 | 10.8 | 4 | ... | ... | ... | ... |
| C95500 | nickel-aluminum bronze | 81 | ... | ... | ... | 4.2 | 10.8 | 4 | ... | ... | ... | ... |
| C95520 | nickel-aluminum bronze | 79.1 | ... | ... | ... | 5.1 | 11 | 4.8 | ... | ... | ... | ... |
| C95700 | manganese nickel aluminum | 74.8 | ... | ... | ... | 2.2 | 7.5 | 3 | 12.5 | ... | ... | ... |
|
| bronze | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... |
| C95800 | nickel-aluminum bronze | 81.3 | ... | ... | ... | 4.5 | 9 | 4 | 1.2 | ... | ... | ... |
| C95900 | aluminum bronze | 83.2 | ... | ... | ... | ... | 12.8 | 4.0 | ... | ... | ... | ... |
| C96400 | copper-nickel | 67 | ... | ... | ... | 30 | ... | 0.90 | ... | ... | ... | ... |
| C96900 | copper-nickel | 76.8 | 8 | ... | ... | 15 | ... | ... | 0.20 | ... | ... | ... |
| C96970 | copper-nickel-tin | 85 | 6 | ... | ... | 9.0 | ... | ... | ... | ... | ... | ... |
| C97300 | leaded nickel bronze | 55.5 | 2.2 | 9.5 | 21 | 12.5 | ... | ... | ... | ... | ... | ... |
| C97600 | leaded nickel bronze | 65 | 4 | 4 | 6 | 20.2 | ... | ... | ... | ... | ... | ... |
| C97800 | leaded nickel bronze | 65.5 | 4.8 | 1.8 | 2.5 | 25.5 | ... | ... | ... | ... | ... | ... |
| C99500 | special alloy | 89.1 | ... | ... | 1.2 | 4.5 | 1.2 | 4.0 | ... | 1.3 | ... | ... |
1.2 Castings produced to this specification may be manufactured for and supplied from stock. In such cases the manufacturer shall maintain heat traceability to specific manufacturing date and chemical analysis.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.