Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 1021 : 2008 : R2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Laboratories Engaged in Testing of Building Sealants
Available format(s)

Hardcopy , PDF

Superseded date

25-05-2023

Language(s)

English

Published date

21-06-2019

This practice describes the qualifications, including minimum requirements for personnel and equipment, duties, responsibilities, and services of independent commercial materials testing laboratories engaged in the testing of caulking and sealants used in building construction.

1.1This practice describes the qualifications, including minimum requirements for personnel and equipment, duties, responsibilities, and services of independent commercial materials testing laboratories engaged in the testing of caulking and sealants used in building construction.

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.3The subcommittee with jurisdiction of this standard is not aware of any similar or equivalent ISO standard.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 24
DocumentType
Standard Practice
Pages
3
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM C 717 : 2019 Standard Terminology of Building Seals and Sealants

ASTM C 1257 : 1994 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 711 : 2022 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C 1382 : 2002 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM E 1323 : 2015 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM C 792 : 2023 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C 1367 : 2006 : R2012 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM C 712 : 2014 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C 1519 : 2010 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 1184 : 2000 : REV A Standard Specification for Structural Silicone Sealants
ASTM D 2452 : 2003 : R2009 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
ASTM C 794 : 2018 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM C 719 : 2022 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
ASTM C 1442 : 2011 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C 1248 : 2004 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1241 : 2000 : R2009 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM D 2203 : 2001 : R2023 Standard Test Method for Staining from Sealants
ASTM C 1246 : 2000 : R2012 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C 1519 : 2004 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 661 : 2015 : R2022 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C 1184 : 2018 : EDT 1 Standard Specification for Structural Silicone Sealants
ASTM C 1241 : 2014 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 1087 : 2023 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM E 1323 : 1989 : R1994 : EDT 1 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM E 1323 : 1989 : R2002 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM C 1635 : 2022 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM C 1265 : 1994 : R2011 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C 1294 : 2015 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C 712 : 2022 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C 1183 : 1991 : R1997 Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM C 1367 : 2001 Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear
ASTM C 1135 : 2000 : R2011 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C 1382 : 2011 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 731 : 2015 : R2022 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
ASTM C 1367 : 2019 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM C 1311 : 2002 Standard Specification for Solvent Release Sealants
ASTM D 2202 : 2000 : R2010 Standard Test Method for Slump of Sealants
ASTM C 1216 : 1992 : R1997 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM C 1184 : 2018 Standard Specification for Structural Silicone Sealants
ASTM C 1087 : 2000 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM D 2453 : 2003 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM D 2203 : 2001 : R2007 Standard Test Method for Staining from Sealants
ASTM C 1294 : 2007 : EDT 1 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C 731 : 2015 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
ASTM C 661 : 2015 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C 910 : 2016 : R2021 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C 1265 : 1994 : R2005 : EDT 1 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C 834 : 2017 : R2023 Standard Specification for Latex Sealants
ASTM C 1311 : 1995 Standard Specification for Solvent Release Sealants
ASTM C 1501 : 2009 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C 1635 : 2014 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM C 1294 : 2007 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C 1241 : 2000 : R2005 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 1248 : 2008 : R2012 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM D 2377 : 2000 : R2008 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM C 1257 : 2006 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 1501 : 2019 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C 1367 : 1997 Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear
ASTM D 2202 : 2000 : R2006 Standard Test Method for Slump of Sealants
ASTM C 1135 : 2019 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM D 2377 : 2000 : R2006 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM C 1265 : 2017 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C 1248 : 2006 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM D 2202 : 2000 Standard Test Method for Slump of Sealants
ASTM C 1501 : 2004 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C 1311 : 2010 Standard Specification for Solvent Release Sealants
ASTM C 1248 : 2022 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM D 2452 : 1994 : R1999 : EDT 1 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
ASTM C 1311 : 2014 Standard Specification for Solvent Release Sealants
ASTM C 1216 : 2003 : R2008 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM C 1442 : 2014 : R2021 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C 1501 : 2014 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C 1257 : 2006 : REV A Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM D 2377 : 2014 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM C 1247 : 2014 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C 1247 : 2009 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C 1519 : 2002 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 1589 : 2005 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
ASTM D 2203 : 2001 : R2018 Standard Test Method for Staining from Sealants
ASTM C 1184 : 2000 : REV A : EDT 1 Standard Specification for Structural Silicone Sealants
ASTM C 1135 : 2000 : R2005 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C 834 : 2017 Standard Specification for Latex Sealants
ASTM C 732 : 2017 : R2022 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM D 2203 : 1993 Standard Test Method for Staining from Sealants
ASTM C 1635 : 2016 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM C 1442 : 2014 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM E 1323 : 2009 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM C 1246 : 2017 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C 1247 : 1998 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C 1246 : 2017 : R2022 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C 1367 : 2006 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM C 736 : 2012 : R2022 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
ASTM C 1294 : 1995 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C 1442 : 2006 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM D 2453 : 2015 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C 1135 : 2000 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM C 794 : 2018 : R2022 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM C 1382 : 2005 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 1135 : 2015 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM E 1580 : 1993 : R2002 Standard Guide for Surveillance of Accredited Laboratories (Withdrawn 2008)
ASTM C 711 : 2014 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C 910 : 2016 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM D 2203 : 2001 : R2011 Standard Test Method for Staining from Sealants
ASTM C 1183 : 2004 Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM D 2202 : 2000 : R2014 Standard Test Method for Slump of Sealants
ASTM C 1183 : 2004 : R2008 Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM E 1301 : 1995 : EDT 1 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM D 2453 : 1999 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C 719 : 2014 : R2019 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
ASTM C 1087 : 2016 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1519 : 2002 : REV A Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 732 : 2017 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM C 1265 : 1994 : R1999 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM D 2453 : 2015 : R2020 : EDT 1 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C 1257 : 2004 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 1087 : 2000 : R2011 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 679 : 2015 : R2022 Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM C 1442 : 2003 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C 792 : 2015 : R2020 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM D 2377 : 2000 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM C 793 : 2023 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM C 1519 : 2010 : R2017 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D 2452 : 2003 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
ASTM C 1311 : 2022 Standard Specification for Solvent Release Sealants
ASTM E 1580 : 1993 Standard Guide for Surveillance of Accredited Laboratories
ASTM C 1257 : 2015 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 1294 : 2001 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C 1247 : 2020 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C 1635 : 2006 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM C 1241 : 2014 : R2022 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 1248 : 2018 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1382 : 1997 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 1382 : 2004 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 1294 : 2007 : R2011 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C 510 : 2016 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
ASTM C 1257 : 2006 : REV A : R2012 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 1216 : 2003 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM C 1382 : 2016 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 679 : 2015 Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM C 1589 : 2004 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
ASTM D 2452 : 2015(R2019) Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
ASTM C 1265 : 2022 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C 1184 : 2005 Standard Specification for Structural Silicone Sealants
ASTM C 510 : 2016 : R2022 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
ASTM C 1241 : 2000 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 793 : 2005 : R2017 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM C 1442 : 1999 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C 1246 : 2000 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C 1246 : 2000 : R2006 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C 1248 : 2008 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1087 : 2000 : R2006 : EDT 1 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1087 : 2000 : R2006 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1519 : 2010 : R2022 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D 2377 : 2014 : R2019 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM C 1184 : 2013 Standard Specification for Structural Silicone Sealants
ASTM D 2202 : 2000 : R2019 Standard Test Method for Slump of Sealants
ASTM C 1184 : 2014 Standard Specification for Structural Silicone Sealants
ASTM C 712 : 2014 : R2021 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C 1382 : 2016 : R2023 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM D 2203 : 2001 Standard Test Method for Staining from Sealants
ASTM C 1248 : 1993 : R1998 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 736 : 2012 : R2017 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
ASTM C 1501 : 2001 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM D 2453 : 2003 : R2009 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM D 2452 : 2015 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
ASTM E 1301 : 1995 : R2003 Standard Guide for Proficiency Testing by Interlaboratory Comparisons (Withdrawn 2003)

View more information
$108.03
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more