ASTM C 1208/C1208M : 2018

Name: ASTM C 1208/C1208M : 2018
Brand: ASTM
Price: 122.77 AUD

Superseded

View Superseded by

Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

Available format(s)

Hardcopy , PDF

Superseded date

14-11-2022

Language(s)

English

Published date

20-09-2018

Publisher

American Society for Testing and Materials

This specification establishes the criteria for the manufacture, quality assurance testing, inspection, installation, field acceptance testing, and product marking of vitrified clay jacking pipe to be used in microtunneling, the pilot tube method, sliplining, pipe bursting, and in casings and tunnels for the conveyance of sewage, industrial wastes, and storm water.

1.1This specification establishes the criteria for the manufacture, quality assurance testing, inspection, installation, field acceptance testing, and product marking of vitrified clay jacking pipe to be used in microtunneling, the pilot tube method, sliplining, pipe bursting, and in casings and tunnels for the conveyance of sewage, industrial wastes, and storm water.

1.1.1Sections 3 through 7 and 9 of this specification contain manufacturing, quality assurance testing, inspection, and product marking criteria which are applicable to vitrified clay pipe prior to installation.

1.1.2Section 8 of this specification contains criteria for the installation and field acceptance testing of vitrified clay pipe.

1.2This specification also covers materials and test requirements for jointing of the pipe.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	C 04
DocumentType	Standard
Pages	7
ProductNote	This standard also refer to ASTM D 395,ASTM D 471
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM C 1208/C1208M : 2018 : R2022
Supersedes	ASTM C 1208/C1208M : 2016 : REV A

ASTM C 67/C67M : 2021	Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D 2240 : 2000	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016 : REV A	Standard Test Method for Rubber Property—Effect of Liquids
ASTM C 1091 : 1999	Standard Test Method for Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
ASTM C 1091 : 2003 : REV A : R2022	Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
ASTM D 1149 : 2016	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM C 301 : 2018 : R2022	Standard Test Methods for Vitrified Clay Pipe
ASTM C 1091 : 2003 : REV A : R2008	Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
ASTM C 896 : 2021 : REV A	Standard Terminology Relating to Clay Products
ASTM D 2240 : 2004	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2015	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM C 1091 : 2002	Standard Test Method for Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
ASTM D 543 : 2021	Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D 412 : 2016 : EDT 1	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1149 : 2007	Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2004 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016 : REV A : R2021	Standard Test Method for Rubber Property—Effect of Liquids
ASTM C 896 : 2021	Standard Terminology Relating to Clay Products
ASTM C 828 : 2011 : R2016	Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM D 412 : 2016	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1149 : 2018	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2015 : R2021	Standard Test Method for Rubber Property—Durometer Hardness
ASTM C 828 : 1998	Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM D 2240 : 2002	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 543 : 2020	Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D 2240 : 2015	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2007 : R2012	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2003	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 1978 : REV A	Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
ASTM D 2240 : 2002 : REV B	Standard Test Method for Rubber Property—Durometer Hardness
ASTM C 896 : 2020 : EDT 1	Standard Terminology Relating to Clay Products
ASTM C 1091 : 2003	Standard Test Method for Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
ASTM C 1091 : 2003 : REV A : R2013	Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
ASTM D 2240 : 2015 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 412 : 2016 : R2021	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 2240 : 2005	Standard Test Method for Rubber Property—Durometer Hardness
ASTM C 828 : 2011 : R2021	Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C 1091 : 2003 : REV A	Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
ASTM C 301 : 2018	Standard Test Methods for Vitrified Clay Pipe
ASTM C 1091 : 2003 : REV A : R2018	Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
ASTM D 2240 : 2005 : R2010	Standard Test Method for Rubber Property—Durometer Hardness
ASTM C 67/C67M : 2020	Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D 2240 : 2002 : REV A	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 1999	Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber