Name: ASTM C 1313/C1313M : 2013
Brand: ASTM
Price: 108.03 AUD

ASTM C 1313/C1313M : 2013

Superseded

View Superseded by

Standard Specification for Sheet Radiant Barriers for Building Construction Applications

Available format(s)

Hardcopy , PDF

Superseded date

23-10-2019

Language(s)

English

Published date

01-03-2013

Publisher

American Society for Testing and Materials

This specification covers the general physical property requirements of radiant barrier materials for use in building construction.

1.1This specification covers the general physical property requirements of radiant barrier materials for use in building construction. The scope is specifically limited to requirements for radiant barrier sheet materials that consist of at least one surface having a far-infrared emittance of 0.1 or less, such as metallic foils or metallic deposits mounted or unmounted on substrates.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3The following safety hazards caveat pertains only to the test methods (Section 10) described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	C 16
DocumentType	Standard
Pages	4
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM C 1313/C1313M : 2013 : R2019
Supersedes	ASTM C 1313/C1313M : 2012

ASTM C 1743 : 2010	Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
ASTM C 1371 : 2004 : REV A : R2010 : EDT 1	Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 2261 : 2007	Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM E 2599 : 2009	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics
ASTM C 1744 : 2012	Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
ASTM C 1338 : 2000	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM D 2261 : 2011	Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D 2261 : 2007 : REV A : EDT 1	Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D 2261 : 2007 : REV A	Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D 3310 : 2000 : R2006	Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM C 1371 : 1998	Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM C 1338 : 2014	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM C 1744 : 2010	Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
ASTM C 1338 : 2019	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM C 1338 : 2008	Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM E 2599 : 2015	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM E 2599 : 2016	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM D 2261 : 1996	Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D 3310 : 2000	Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM C 1743 : 2018	Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
ASTM E 2599 : 2010	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM C 1743 : 2019	Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
ASTM C 1371 : 2004	Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E 2599 : 2011	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM D 3310 : 2000 : R2014	Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM D 2261 : 2013	Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D 2261 : 2013 : R2017 : EDT 1	Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM C 1371 : 2004 : REV A	Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 2261 : 2013 : R2017	Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM C 1743 : 2012	Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
ASTM E 2599 : 2018	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM C 1371 : 2015	Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E 2599 : 2009 : REV A	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics
ASTM D 2261 : 1996 : R2002	Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)