ASTM C 1314 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Test Method for Compressive Strength of Masonry Prisms
Hardcopy , PDF
10-05-2023
English
18-12-2018
This test method covers procedures for masonry prism construction and testing, and procedures for determining the compressive strength of masonry,fmt, used to determine compliance with the specified compressive strength of masonry,f ′m.
1.1This test method covers procedures for masonry prism construction and testing, and procedures for determining the compressive strength of masonry, fmt, used to determine compliance with the specified compressive strength of masonry, f ′m. When this test method is used for research purposes, the construction and test procedures within serve as a guideline and provide control parameters.
1.2This test method also covers procedures for determining the compressive strength of prisms obtained from field-removed masonry specimens.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
C 15
|
| DocumentType |
Test Method
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 7147 : 2021 | Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers |
| ASTM C 1093 : 2022 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 90 : 2022 | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM C 1716/C1716M : 2021 | Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms |
| ASTM C 1716/C1716M : 2020 | Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms |
| ASTM C 1298 : 2021 | Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys |
| ASTM C 1825 : 2019 | Standard Guide for Developing Specifications for Masonry Units |
| ASTM D 7147 : 2011 : R2018 | Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers |
| ASTM C 1587/C1587M : 2021 : REV A | Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing |
| ASTM C 901 : 2018 | Standard Specification for Prefabricated Masonry Panels |
| ASTM C 1825 : 2018 : EDT 1 | Standard Guide for Developing Specifications for Masonry Units |
| ASTM C 90 : 2016 : REV A | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM C 1587/C1587M : 2015 | Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing |
| ASTM C 1716/C1716M : 2019 | Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms |
| ASTM C 67/C67M : 2021 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM C 1093 : 2013 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1232 : 2009 : REV B | Standard Terminology of Masonry |
| ASTM C 1019 : 2005 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1019 : 2000 : REV B | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1180 : 2010 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1180 : 2003 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2015 : REV A | Standard Terminology of Masonry |
| ASTM C 1232 : 2017 | Standard Terminology for Masonry |
| ASTM C 1552 : 2009 | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1019 : 2008 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1180 : 2002 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1093 : 2019 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2013 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1019 : 2003 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1587/C1587M : 2021 : REV A | Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing |
| ASTM C 1093 : 1995 | Standard Practice for Accreditation of Testing Agencies for Unit Masonry |
| ASTM C 1232 : 2020 | Standard Terminology for Masonry |
| ASTM C 1019 : 2016 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1232 : 2005 | Standard Terminology of Masonry |
| ASTM C 1552 : 2016 | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1552 : 2014 : REV A | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1019 : 2018 : EDT 1 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1552 : 2012 | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1180 : 2018 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1093 : 2013 : REV A : EDT 1 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2015 : REV A : EDT 1 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1232 : 2015 | Standard Terminology of Masonry |
| ASTM C 1232 : 2008 | Standard Terminology of Masonry |
| ASTM C 1552 : 2009 : REV A | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1019 : 2002 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1180 : 2003 : REV A : EDT 1 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM E 105 : 2021 | Standard Guide for Probability Sampling of Materials |
| ASTM C 1093 : 2006 | Standard Practice for Accreditation of Testing Agencies for Unit Masonry |
| ASTM C 1093 : 2015 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1019 : 2007 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1532/C1532M : 2020 | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction |
| ASTM C 1180 : 2003 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1019 : 2009 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1532/C1532M : 2021 | Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction |
| ASTM C 1232 : 2010 : REV C | Standard Terminology of Masonry |
| ASTM C 1093 : 2007 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1552 : 2015 | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1552 : 2003 : REV A | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1232 : 2001 | Standard Terminology of Masonry |
| ASTM C 1093 : 2012 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1232 : 2010 | Standard Terminology of Masonry |
| ASTM C 1232 : 2009 | Standard Terminology of Masonry |
| ASTM C 1180 : 2007 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1019 : 2008 : REV A | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1232 : 2010 : REV B | Standard Terminology of Masonry |
| ASTM C 1552 : 2002 | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM E 105 : 2016 | Standard Practice for Probability Sampling of Materials |
| ASTM C 1019 : 2000 : REV B : EDT 1 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1019 : 2011 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1587/C1587M : 2021 | Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing |
| ASTM C 1232 : 2002 | Standard Terminology of Masonry |
| ASTM C 1093 : 2008 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1552 : 2007 | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1552 : 2008 | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1232 : 2000 | Standard Terminology of Masonry |
| ASTM C 1552 : 2008 : REV A | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 1232 : 2009 : REV A | Standard Terminology of Masonry |
| ASTM C 1232 : 2012 | Standard Terminology of Masonry |
| ASTM C 67/C67M : 2020 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| ASTM C 1180 : 2019 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2010 : REV A | Standard Terminology of Masonry |
| ASTM C 1093 : 2009 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1019 : 2018 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1093 : 2011 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1180 : 2000 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1019 : 2013 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1019 : 2014 | Standard Test Method for Sampling and Testing Grout |
| ASTM C 1093 : 2015 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 780 : 2000 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.