Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 1396/C1396M : 2017 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Specification for Gypsum Board
Available format(s)

PDF

Language(s)

English

Published date

11-07-2017

CONTAINED IN VOL. 04.01, 2017 Defines the gypsum boards.

1.1This specification covers the gypsum boards described in 1.1.1 – 1.1.9.

Note 1:Specifications C840, C841, C844 and C1280 contain application procedures for gypsum board.

1.1.1Gypsum wallboard, designed for use on walls, ceilings, or partitions and that affords a surface suitable to receive decoration.

1.1.2Predecorated gypsum board, designed for use as the finished surfacing for walls, ceilings, or partitions.

1.1.3Gypsum backing board, coreboard, and shaftliner board, designed for use as a base in multilayer systems or as a gypsum stud or core in semisolid or solid gypsum board partitions, or in shaft wall assemblies.

Note 2:The terms backing board, coreboard, and shaftliner board refer to different end uses. The term gypsum backing board, as used in this specification, shall include gypsum coreboard and gypsum shaftliner board unless otherwise stated.

1.1.4Water-resistant gypsum backing board, designed primarily to be used as a base for the application of ceramic or plastic tile on walls or ceilings. This product is also suitable for decoration.

1.1.5Exterior gypsum soffit board, designed for use on exterior soffits and carport ceilings that are completely protected from contact with liquid water.

1.1.6Gypsum sheathing board, designed for use as sheathing on buildings.

1.1.7Gypsum base for veneer plaster, designed for use as a base for the application of gypsum veneer plaster.

1.1.8Gypsum lath, designed for use as a base for the application of gypsum plaster.

1.1.9Gypsum ceiling board, designed for use on interior ceilings with framing spaced not more than 24 in. [610 mm] on center and that affords a surface suitable to receive water-based texture and other decoration. This product is also suitable for use on interior walls.

1.2Specifications applicable to all gypsum boards are located in Section 1 – 4 and 13 – 15. Specifications applicable to specific gypsum boards are located in the following sections:

Section

Gypsum Wallboard, Predecorated Gypsum Board, and Laminated Gypsum Board

5

Gypsum backing board, gypsum coreboard,
gypsum shaftliner board

6

Water-resistant gypsum backing board

7

Exterior gypsum soffit board

8

Gypsum sheathing board

9

Gypsum base for veneer plaster

10

Gypsum lath

11

Gypsum Ceiling Board

12

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 11
DevelopmentNote
Supersedes ASTM C 1395/C1395M, ASTM C 36/C36M, ASTM C 37/C37M, ASTM C 442/C442M, ASTM C 630/C630M, ASTM C 79/C79M, ASTM C 931/C931M & ASTM C 960/C960M. (01/2005) Supersedes ASTM C 588/C588M. (11/2005)
DocumentType
Redline
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM C 474 : 2015 : REDLINE Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
ASTM D 7374 : 2008 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
ASTM C 587 : 2004 : R2014 Standard Specification for Gypsum Veneer Plaster
ASTM C 1597M : 2004 : R2009 : EDT 1 Standard Specification for Gypsum Wallboard (Hard Metric Sizes) (Withdrawn 2013)
ASTM C 1288 : 2017 : REDLINE Standard Specification for Fiber-Cement Interior Substrate Sheets
ASTM D 6464 : 2003 : REV A : EDT 1 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 587 : 2004 Standard Specification for Gypsum Veneer Plaster
ASTM C 844 : 2015 : REDLINE Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster
ASTM D 7374 : 2008 : R2015 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
NFPA 286 : 2015 STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH
ASTM E 2231 : 2018 : REDLINE Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
NFPA 5000 : 2018 BUILDING CONSTRUCTION AND SAFETY CODE
ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44
FC 4-740-14N : 2014 FACILITIES CRITERIA - NAVY AND MARINE CORPS CHILD DEVELOPMENT CENTERS
ASTM D 7470 : 2008 Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs
ICC IBC INTERNATIONAL BUILDING CODE : 2015 INTERNATIONAL BUILDING CODE
ASTM C 1186 : 2008 : R2012 Standard Specification for Flat Fiber-Cement Sheets
ASTM E 2957 : 2017 : REDLINE Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
ASTM D 6464 : 2003 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 1858 : 2017 StandardPracticefor Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
ASTM C 1597M : 2004 Standard Specification for Gypsum Wallboard (Hard Metric Sizes)
NFPA 265 : 2015 METHODS OF FIRE TESTS FOR EVALUATING ROOM FIRE GROWTH CONTRIBUTION OF TEXTILE OR EXPANDED VINYL WALL COVERINGS ON FULL HEIGHT PANELS AND WALLS
ASTM C 1766 : 2015 : REDLINE Standard Specification for Factory-Laminated Gypsum Panel Products
ASTM C 645 : 2014-11 SPECIFICATION FOR NONSTRUCTURAL STEEL FRAMING MEMBERS
ASTM D 6464 : 2003 : REV A : R2017 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ISO/TR 834-2:2009 Fire-resistance tests Elements of building construction Part 2: Guidance on measuring uniformity of furnace exposure on test samples
ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 IRC® Code and Commentary, Volume 2
ICC 2012 INTERNATIONAL RESI. CODE : 2012 INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS
ASTM E 2634 : 2017-06 SPECIFICATION FOR FLAT WALL INSULATING CONCRETE FORM (ICF) SYSTEMS
ACI 216.1M : 2014 CODE REQUIREMENTS FOR DETERMINING FIRE RESISTANCE OF CONCRETE AND MASONRY CONSTRUCTION ASSEMBLIES
ASTM C 557 : 2003 : R2009 : EDT 1 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 587 : 2004 : R2009 Standard Specification for Gypsum Veneer Plaster
ASTM C 557 : 2003 : EDT 1 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 954 : 2015-06 SPECIFICATION FOR STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO STEEL STUDS FROM 0.033 IN. (0.84 MM) TO 0.112 IN. (2.84 MM) IN THICKNESS
ASTM E 2404 : 2017 : REDLINE Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics
ASTM C 557 : 2003 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 6464 : 2003 : REV A Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 1186 : 2008 : R2016 Standard Specification for Flat Fiber-Cement Sheets
CSA O86 : 2014 ENGINEERING DESIGN IN WOOD
ACI 216.1 : 2014 CODE REQUIREMENTS FOR DETERMINING FIRE RESISTANCE OF CONCRETE AND MASONRY CONSTRUCTION ASSEMBLIES
ASTM C 1186 : 2008 Standard Specification for Flat Fiber-Cement Sheets
ASTM D 6464 : 2003 : REV A : R2009 : EDT 1 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 1325 : 2017-02 SPECIFICATION FOR NON-ASBESTOS FIBER-MAT REINFORCED CEMENTITIOUS BACKER UNITS
ASTM C 557 : 2003 : R2017 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 7470 : 2008 : R2015 Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs

ASTM E 96/E96M : 2016 : REDLINE Standard Test Methods for Water Vapor Transmission of Materials
ASTM C 844 : 2015 : REDLINE Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster
ASTM C 645 : 2014-11 SPECIFICATION FOR NONSTRUCTURAL STEEL FRAMING MEMBERS
ASTM D 3273 : 2016 : REDLINE Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber

View more information
$122.77
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more