Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

Available format(s)

PDF

Language(s)

English

Published date

15-07-2014

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 04.07, 2014 Defines three types of laboratory weathering exposure procedures for evaluating the effect of actinic radiation, heat, and moisture on sealants.

1.1This practice covers three types of laboratory weathering exposure procedures for evaluating the effect of actinic radiation, heat, and moisture on sealants.

1.2The exposure sources used in the three types of artificial weathering devices are the filtered xenon arc, fluorescent ultraviolet lamps, and open flame carbon arc based on Practices G155, G154, and G152, respectively.

1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.

1.4The ISO standard related to this Practice is ISO 11431. Significant differences exist between the procedures. The ISO specimens are exposed through glass and are elongated prior to examination for loss of adhesion or cohesion, or both, following exposure.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	C 24
DocumentType	Redline
Pages	7
PublisherName	American Society for Testing and Materials
Status	Current

ASTM C 510 : 2016 : REDLINE	Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
ASTM C 1021 : 2008	Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM C 1021 : 2008 : R2014	Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM C 1519 : 2010	Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 1523 : 2017 : REDLINE	Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM C 1518 : 2016 : REDLINE	Standard Specification for Precured Elastomeric Silicone Joint Sealants
ASTM C 1248 : 2008 : R2012	Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 1311 : 2014 : REDLINE	Standard Specification for Solvent Release Sealants
ASTM C 1248 : 2008	Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM C 793 : 2005	Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM C 1257 : 2015 : REDLINE	Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
ASTM C 793 : 2005 : R2010	Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM C 734 : 2015 : REDLINE	Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
ASTM C 793 : 2005 : R2017	Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM C 1519 : 2010 : R2017	Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 1193 : 2016 : REDLINE	Standard Guide for Use of Joint Sealants
ASTM C 732 : 2017 : REDLINE	Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM C 920 : 2018 : REDLINE	Standard Specification for Elastomeric Joint Sealants
ASTM E 2785 : 2014 : REDLINE	Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
ASTM D 5893 : 2004	Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
ASTM C 957/C957M : 2017 : REDLINE	Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM C 1382 : 2016 : REDLINE	Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

ASTM G 154 : 2016 : REDLINE	Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM G 152 : 2013 : REDLINE	Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ISO 11431:2002	Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass
ASTM G 155 : 2013 : REDLINE	Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G 113 : 2016 : REDLINE	Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM G 147 : 2017 : REDLINE	Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests

View more information

$122.77

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

ASTM C 1442 : 2014 : REDLINE

Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

Abstract

Scope

General Product Information

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory