ASTM C 877M : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
Available format(s)
Hardcopy , PDF
Superseded date
02-02-2021
Language(s)
English
Published date
31-01-2017
1.1This specification covers external sealing bands to be used in conjunction with concrete pipe as defined in Terminology C822 and conforming to Specifications C14M, C76M, C412M, C478M, C506M, C507M, C655M, C985M, C1417M, and C1433M.
1.1.1Type I, Rubber and Mastic Bands.
1.1.2Type II, Plastic Film and Mesh Reinforced Mastic Bands.
1.1.3Type III, Chemically Bonded Adhesive Butyl Bands.
1.2This specification is the metric counterpart of Specification C877.
Note 1:This specification covers only the design and material of the sealing bands. Sealing bands covered by this specification are adequate, when properly installed, for external hydrostatic pressures up to 90 kPa, (9.14 m) without leakage. The amount of infiltration or exfiltration flow in an installed pipeline is dependent upon many factors other than the sealing bands; allowable quantities and suitable testing of the installed pipeline and system must be covered by other specifications.
| Committee |
C 13
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 3953 : 2006 | Standard Specification for Strapping, Flat Steel and Seal |
| ASTM D 2240 : 2000 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1417M : 2014 : EDT 1 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1417M : 2004 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2013 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1417M : 2014 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2007 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1417M : 2000 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2008 : REV A | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 1171 : 1999 | Standard Test Method for Rubber Deterioration-Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) |
| ASTM D 1171 : 2016 | Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens) |
| ASTM C 1417M : 2013 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2000 : REV A | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric] |
| ASTM D 3953 : 2007 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1433M : 2014 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 1278 : 1991 : REV A : R2002 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 1171 : 1999 : R2007 | Standard Test Method for Rubber Deterioration<span class='unicode'>—</span>Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) |
| ASTM D 3953 : 1991 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 1278 : 1991 : REV A : R1997 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 1171 : 2015 | Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) |
| ASTM D 3953 : 2012 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1417M : 2008 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM D 3953 : 2015 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1417M : 2012 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2006 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2202 : 2000 : R2010 | Standard Test Method for Slump of Sealants |
| ASTM D 2240 : 2004 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1417M : 2015 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1417M : 2011 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2008 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2007 : REV A | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2016 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2202 : 2000 : R2006 | Standard Test Method for Slump of Sealants |
| ASTM C 1417M : 2003 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1417M : 2013 : REV A | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM D 3953 : 2005 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 1278 : 1991 : REV A : R2015 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 2202 : 2000 | Standard Test Method for Slump of Sealants |
| ASTM C 1433M : 2001 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2240 : 2004 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1278 : 1991 : REV A : R2011 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM C 1433M : 2016 : REV B | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2009 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2004 : EDT 1 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2010 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 3953 : 2007 : REV A | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1433M : 2002 : REV A | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 1278 : 1991 : REV A : R2002 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 2202 : 2000 : R2014 | Standard Test Method for Slump of Sealants |
| ASTM D 2240 : 2002 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1417M : 2019 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM D 2240 : 2015 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 2240 : 2003 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1433M : 2013 : REV B | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2240 : 2002 : REV B | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1278 : 1991 : REV A : R2020 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM C 1433M : 2004 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2018 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2019 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1171 : 2016 : EDT 1 | Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens) |
| ASTM D 3953 : 2002 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1433M : 2016 : REV A | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 1278 : 1991 : REV A : R2007 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 2240 : 2005 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3953 : 2013 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 2240 : 2005 : R2010 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1171 : 2018 | Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens) |
| ASTM D 1963 : 1985 : R1996 | Standard Test Method for Specific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at 25/25°C (Withdrawn 2004) |
| ASTM D 2202 : 2000 : R2019 | Standard Test Method for Slump of Sealants |
| ASTM C 1433M : 2013 : REV A | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2240 : 2002 : REV A | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3953 : 1997 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1433M : 2002 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2015 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
$122.77
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.