Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 1078 : 2011 : R2019

Current
Current

The latest, up-to-date edition.

Standard Test Method for Distillation Range of Volatile Organic Liquids
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-04-2019

This test method covers the determination of the distillation range of liquids boiling between 30 and 350 °C, that are chemically stable during the distillation process, by manual or automatic distillation procedures.

1.1This test method covers the determination of the distillation range of liquids boiling between 30 and 350 °C, that are chemically stable during the distillation process, by manual or automatic distillation procedures.

1.2This test method is applicable to organic liquids such as hydrocarbons, oxygenated compounds, chemical intermediates, and blends thereof.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.

1.5For hazard information and guidance, see the supplier's Material Safety Data Sheet.

1.6Warning—Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney, and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury-containing products. See the applicable product Material Safety Data Sheet (MSDS) for details and EPA’s website (http://www.epa.gov/mercury/faq.htm) for additional information. Users should be aware that selling mercury or mercury-containing products, or both, in your state may be prohibited by state law.

1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7.

1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 01
DocumentType
Test Method
Pages
9
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 2917 : 2007 : R2013 Standard Specification for Methyl Isoamyl Ketone
ASTM D 5399 : 2009 : R2017 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
ASTM D 5137 : 2007 : R2013 Standard Specification for Hexyl Acetate
ASTM D 4835 : 2008 : R2012 Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)
ASTM F 311 : 2008 : R2013 Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM D 2627 : 2008 : R2012 Standard Specification for Diacetone Alcohol (Withdrawn 2021)
ASTM D 4079 : 2000 : R2016 Standard Specification for Vapor-Degreasing Grade Methylene Chloride
ASTM D 2636 : 2007 : R2012 Standard Specification for Hexylene Glycol (Withdrawn 2021)
ASTM D 2916 : 2009 : R2017 Standard Specification for Isophorone
ASTM D 3540 : 2012 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade) (Withdrawn 2021)
ASTM D 3278 : 1996 : R2011 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020)
ASTM D 3728 : 2008 : R2012 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade) (Withdrawn 2021)
ASTM D 4995 : 2010 : R2015 Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent
ASTM D 1718 : 2009 : R2017 Standard Specification for Isobutyl Acetate (95 % Grade)
ASTM D 3131 : 2007 : R2013 Standard Specification for Isopropyl Acetate (99 % Grade)
ASTM E 1119 : 2009 : R2015 : EDT 1 Standard Specification for Industrial Grade Ethylene Glycol
ASTM E 133 : 1992 : R2016 Standard Specification for Distillation Equipment
ASTM D 329 : 2007 : R2013 Standard Specification for Acetone
ASTM D 4171 : 2016 : REV A Standard Specification for Fuel System Icing Inhibitors
ASTM D 1153 : 2012 Standard Specification for Methyl Isobutyl Ketone (Withdrawn 2021)
ASTM D 1310 : 2014 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM E 1405 : 1998 : R2016 Standard Specification for Laboratory Glass Distillation Flasks
ASTM D 4615 : 2012 Standard Specification for n-Butyl Acetate (All Grades) (Withdrawn 2021)
ASTM D 268 : 2001 : R2012 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021)
ASTM D 4837 : 2007 : R2012 Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021)
ASTM E 2470 : 2009 : R2015 : EDT 1 Standard Specification for Polyester Grade Ethylene Glycol
ASTM D 4836 : 2009 : R2017 Standard Specification for Dipropylene Glycol Monomethyl Ether
ASTM D 1093 : 2011 : R2017 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
ASTM D 7670 : 2010 : R2017 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
ASTM D 1836 : 2007 : R2013 Standard Specification for Commercial Hexanes
ASTM D 3585 : 2008 : R2013 Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D 1133 : 2013 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
ASTM D 3128 : 2007 : R2013 Standard Specification for 2-Methoxyethanol
ASTM D 330 : 2007 : R2013 Standard Specification for 2-Butoxyethanol
ASTM D 2634 : 2007 : R2013 Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM D 2190 : 2007 : R2013 Standard Specification for Vinyl Acetate

ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 86 : 2023 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 86 : 2023 : REV A : EDT 1 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 86 : 2020 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 86 : 2018 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 86 : 2019 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 86 : 2012 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
ASTM D 86 : 2020 : REV B Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM E 133 : 1992 : R2022 Standard Specification for Distillation Equipment
ASTM D 86 : 2016 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 86 : 2023 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM E 1 : 2014 : R2020 Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM D 86 : 2020 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 86 : 2015 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM D 86 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
$103.13
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more