ASTM D 1084 : 2016 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Test Methods for Viscosity of Adhesives
Available format(s)
PDF
Language(s)
English
Published date
01-05-2016
CONTAINED IN VOL. 15.06, 2016 Describes the determination of the viscosity of free-flowing adhesives.
1.1These test methods cover the determination of the viscosity of free-flowing adhesives.
1.1.1The limitation of this test method to self-leveling adhesives eliminates thixotropic and plastic materials whose viscosity is a function of the rate of stirring and previous history of the adhesive.
1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 14
|
| DevelopmentNote |
Supersedes ASTM D 553. (02/2002)
|
| DocumentType |
Redline
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| ASTM F 493 : 2014 : REDLINE | Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings |
| MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| MIL-A-46106 Revision B:1989 | ADHESIVE-SEALANTS, SILICONE, RTV, ONE-COMPONENT |
| ASTM D 2835 : 1989 : R2017 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| AASHTO M 235M/M 235 : 2013 | SPECIFICATION FOR EPOXY RESIN ADHESIVES |
| ASTM D 1580 : 1960 : R1984 | Specification for Liquid Adhesives for Automatic Machine Labeling of Glass Bottles |
| NACE SP 01 09 : 2009 | FIELD APPLICATION OF BONDED TAPE COATINGS FOR EXTERNAL REPAIR, REHABILITATION, AND WELD JOINTS ON BURIED METAL PIPELINES |
| MIL-A-47318 Revision A:1990 | ADHESIVE, COPOLYMER POLYURETHANE |
| ASTM D 3122 : 2015 : REDLINE | Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings |
| MIL-A-14064 Revision C:1980 | ADHESIVE: GRINDING DISK |
| ASTM D 1338 : 1999 : R2011 | Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| ASTM D 816 : 2006 | Standard Test Methods for Rubber Cements |
| SAE AMS 3126 : 2013 | Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder |
| ASTM D 2835 : 1989 : R2003 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM D 6465 : 1999 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| TAPPI T 666 : OM 86 | VISCOSITY OF ADHESIVES USING A LOW-SHEAR ROTATING APPARATUS |
| ASTM F 545 : 1995 | Specification for PVC and ABS Injected Solvent Cemented Plastic Pipe Joints (Withdrawn 2001) |
| ASTM D 7149 : 2005 : R2016 | Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
| ASTM D 2835 : 1989 : R2007 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM D 1337 : 2010 : R2016 | Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM D 6411/D6411M : 1999 : R2005 | Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| ASTM D 2680 : 2001 : R2014 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ASTM F 2468 : 2005 : R2011 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 6465 : 1999 : R2005 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| PD IEC/PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| ASTM D 4070 : 2015 : REDLINE | Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures |
| MIL-A-81270 Base Document:1965 | ADHESIVE, SYNTHETIC RUBBER |
| AASHTO T 237 : 2005 | METHOD OF TEST FOR TESTING EPOXY RESIN ADHESIVE |
| ASTM D 4317 : 2016 : REDLINE | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
| ASTM D 1338 : 1999 : R2016 | Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| MIL-A-47310 Base Document:1987 | ADHESIVE SYSTEM, ADHESIVE AND PRIMER, FOR BONDING ETHYLENE-PROPYLENE RUBBER TO METAL |
| ASTM D 6411/D6411M:1999 | Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| MIL-G-413 Revision C:1986 | GLUE, MARINE, AND AVIATION MARINE [WATERPROOF] |
| ASTM D 3138 : 2004 | Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
| ASTM D 2235 : 2004 : R2011 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM D 2680 : 2001 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ASTM D 2851 : 2015 : REDLINE | Standard Specification for Liquid Optical Adhesive |
| ASTM D 816 : 2006 : R2011 | Standard Test Methods for Rubber Cements |
| MIL-A-82843 Base Document:1990 | ADHESIVE, ELEVATED TEMPERATURE CURING |
| DIN 6701-3:2015-12 | ADHESIVE BONDING OF RAILWAY VEHICLES AND PARTS - PART 3: GUIDELINE FOR CONSTRUCTION DESIGN AND VERIFICATION OF BONDS ON RAILWAY VEHICLES |
| MIL-A-81236 Base Document:1965 | ADHESIVE; EPOXY RESIN WITH POLYAMIDE CURING AGENT |
| MIL-A-47073 Base Document:1974 | ADHESIVE, PLASTIC RESIN |
| MIL-A-3920 Revision C:1977 | ADHESIVE, OPTICAL, THERMOSETTING |
| MMM-A-180 Revision C:1979 | ADHESIVE POLYVINYL ACETATE EMULSION |
| MIL-P-87112 Base Document:1977 | PRIMER COATING, ELASTOMERIC, POLYSULFIDE, CORROSION INHIBITING |
| MIL-A-24179 Revision A:1969 | ADHESIVE, FLEXIBLE UNICELLULAR - PLASTIC THERMAL INSULATION |
| MIL-A-82569 Base Document:1969 | ADHESIVE, NEOPRENE BASE, MEDIUM VISCOSITY |
| SAE AMS 3359 : 2016 | SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 TO 400 POISES (20 TO 40 PAS) VISCOSITY |
| ASTM D 1337:2010 | Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| ASTM D 7149 : 2005 : R2011 : EDT 1 | Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
| ASTM D 6411/D6411M : 1999 : R2012 | Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
| ASTM D 2235 : 2004 : R2016 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| MIL-I-46838 Revision B:1981 | INSULATING COMPOUND, ELECTRICAL, SILICONE RUBBER, ROOM TEMPERATURE VULCANIZING |
| A-A-1936 Revision A:1996 | ADHESIVES, CONTACT, NEOPRENE RUBBER |
| MIL-A-47317 Base Document:1987 | ADHESIVE, AIR DRYING, SILICONE RUBBER |
| MIL-B-83277 Revision A:1975 | BOOTS, FLYERS FWU-8/P |
| MIL-PRF-82791 Base Document:1990 | RUBBER, SILICONE, RTV |
| MIL-I-46865 Revision B:1991 | INSULATING COMPOUND, ELECTRICAL, EPOXY, COLLOIDAL SILICA FILLED FOR POTTING AND ENCAPSULATION |
| ASTM D 2680 : 2001 : R2009 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| MIL-A-46050 Revision C:1979 | ADHESIVE, CYANOACRYLATE, RAPID-ROOM TEMPERATURE CURING, SOLVENTLESS |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| ASTM D 1874 : 2016 : REDLINE | Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases |
| MIL-PRF-24793 Revision A:2001 | Adhesive, UV Curable, One Part, Fiber Optics |
| ASTM D 1338:1999 | Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| MIL-R-60671 Base Document:1967 | RUBBER, CHLORINATED, NATURAL, POWDER |
| MIL-P-82823 Base Document:1983 | PRIMER, ADHESIVE, CHLORINATED RUBBER BASE |
| A-A-52469 Revision A:2012 | CEMENT, TREAD, RUBBER (METRIC) |
| ASTM D 2835 : 1989 : R1998 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM D 4800 : 1994 : R2005 | Standard Guide for Classifying and Specifying Adhesives |
| SAE AMS 3704 : 2016 | ADHESIVE, CONTACT, POLYCHLOROPRENE (CR) RUBBER, RESIN MODIFIED |
| ASTM D 2835 : 1989 : R2012 | Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements |
| ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
| ASTM D 816 : 2006 : R2016 | Standard Test Methods for Rubber Cements |
| ASTM D 4800 : 1994 : R1999 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 8089 : 2017 | Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives |
| VV-D-1078 Revision B:1983 | DAMPING FLUID, SILICONE BASE (DIMETHYL POLYSILOXANE) |
| MIL-I-47199 Revision A:1980 | INSULATING COMPOUND, ELECTRICAL, LOW VISCOSITY, SILICONE RUBBER |
| MIL-B-21408 Revision G:1984 | BOOTS, SAFETY |
| MIL-S-45180 Revision D:1984 | SEALING COMPOUND,GASKET,HYDROCARBON FLUID AND WATER RESISTANT |
| A-A-1270 Base Document:1996 | ADHESIVE, POLYVINYL ACETATE EMULSION, GENERAL PURPOSE |
| MIL-DTL-82633 Revision A:2011 | Compound, Polymeric Elastomer, Thermosetting |
| MIL R 82791 : 0 | RUBBER, SILICONE, RTV |
| MIL-A-52685 Base Document:1970 | ADHESIVE: BONDING, CHLOROPRENE AIR FIELD, MEMBRANE SURFACING |
| MIL-R-25506 Revision C:1982 | Resin Solution, Silicone, Low-Pressure Laminating |
| MIL-A-50926 Revision A:1975 | ADHESIVE MR-23 (FOR USE IN AMMUNITION) |
| MIL-A-47040 Base Document:1974 | ADHESIVE-SEALANT, SILICONE, RTV, HIGH TEMPERATURE |
| MIL P 47241 : 0 | PRIMER, POLYURETHANE, ONE PART |
| MIL-A-87134 Base Document:1978 | ADHESIVE, CONTACT, FOR CUSTOM FIT HELMET LINERS |
| MIL-A-47284 Revision A:1991 | ADHESIVE, EPOXY RESIN BASE |
| ASTM F 2468 : 2005 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 6465 : 1999 : R2012 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 4800 : 1994 : R2011 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 6465 : 1999 : R2016 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 3138 : 2004 : R2011 | Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
| ASTM D 3138 : 2004 : R2016 | Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components |
| ASTM D 2235 : 2004 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM D 1338 : 1999 : R2005 | Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength |
| ASTM D 4800 : 1994 : R2015 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 7149 : 2005 | Standard Practice for Determining the Freeze Thaw Stability of Adhesives |
| IEC PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| 13/30295424 DC : 0 | BS IEC/PAS 61249-8-1 ED.1 - QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
| ASTM D 115 : 2017 : REDLINE | Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
| ASTM D 1200 : 2010 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| ASTM D 562 : 2010 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| ASTM D 907 : 2015 : REDLINE | Standard Terminology of Adhesives |
$122.77
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.