Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 1655 : 2019

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Aviation Turbine Fuels
Available format(s)

Hardcopy , PDF

Superseded date

29-01-2020

Language(s)

English

Published date

01-03-2019

This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract.

1.1This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract.

1.2This specification defines the minimum property requirements for Jet A and Jet A-1 aviation turbine fuel and lists acceptable additives for use in civil operated engines and aircrafts. Specification D1655 is directed at civil applications, and maintained as such, but may be adopted for military, government or other specialized uses. Guidance information for these other applications is available in the appendix.

1.3This specification can be used as a standard in describing the quality of aviation turbine fuel from production to the aircraft. However, this specification does not define the quality assurance testing and procedures necessary to ensure that fuel in the distribution system continues to comply with this specification after batch certification. Such procedures are defined elsewhere, for example in ICAO 9977, EI/JIG Standard 1530, JIG 1, JIG 2, API 1543, API 1595, and ATA-103.

1.4This specification does not include all fuels satisfactory for aviation turbine engines. Certain equipment or conditions of use may permit a wider, or require a narrower, range of characteristics than is shown by this specification.

1.5Aviation turbine fuels defined by this specification may be used in other than turbine engines that are specifically designed and certified for this fuel.

1.6This specification no longer includes wide-cut aviation turbine fuel (Jet B). FAA has issued a Special Airworthiness Information Bulletin which now approves the use of Specification D6615 to replace Specification D1655 as the specification for Jet B and refers users to this standard for reference.

1.7The values stated in SI units are to be regarded as standard. However, other units of measurement are included in this standard.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.9This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 02
DocumentType
Standard
Pages
23
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 8073 : 2016 Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument
ASTM D 5677 : 2017 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
ASTM D 7619 : 2017 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 7797 : 2018 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D 7215 : 2016 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
ASTM D 381 : 2019 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D 7945 : 2016 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D 6615 : 2015 : REV A Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM C 1124/C1124M : 1990 : R2015 Standard Test Method for Kerosene Retention of Asbestos (Withdrawn 2021)
ASTM D 381 : 2012 : R2017 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D 7223 : 2017 Standard Specification for Aviation Certification Turbine Fuel
ASTM D 4865 : 2019 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 1319 : 2018 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 7687 : 2017 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
ASTM D 4529 : 2017 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 7464 : 2014 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
ASTM D 6824 : 2013 : R2018 Standard Test Method for Determining Filterability of Aviation Turbine Fuel
ASTM D 130 : 2019 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D 7095 : 2017 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D 2276 : 2006 : R2014 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 6469 : 2017 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 2386 : 2019 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 3241 : 2019 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3343 : 2016 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D 8166 : 2017 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
ASTM D 1405/D1405M : 2008 : R2013 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019)
ASTM D 4054 : 2019 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
ASTM D 8147 : 2017 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines
ASTM D 7566 : 2019 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4868 : 2017 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
ASTM D 7463 : 2018 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
ASTM D 7548 : 2016 : REV A Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
ASTM D 3880/D3880M : 1990 : R2017 Standard Test Method for Asbestos Strength Units (Withdrawn 2022)
ASTM D 4539 : 2017 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
ASTM D 4171 : 2016 : REV A Standard Specification for Fuel System Icing Inhibitors

ASTM D 7945 : 2015 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D 6890 : 2015 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2008 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 3948 : 2011 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2622 : 1992 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 3241 : 2009 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2019 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7224 : 2013 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D 3338 : 1992 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 3241 : 2005 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 5453 : 2009 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6469 : 2004 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 7224 : 2005 Standard Test Method for Determining Water Separation Characteristics of Kerosine-type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3343 : 2005 : R2010 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D 6866 : 2011 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D 1322 : 1997 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 5001 : 1990 : REV A : R2000 : EDT 1 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D 6045 : 2012 : R2017 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D 7153 : 2005 : R2010 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 2622 : 1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 7170 : 2014 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 4865 : 2009 : R2014 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 3240 : 2011 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 6866 : 2012 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D 5972 : 2005 : R2010 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 7566 : 2010 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 5972 : 1999 : REV A Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 3240 : 2015 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 3828 : 2002 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 3120 : 1996 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 3227 : 2000 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 1319 : 1989 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
ASTM D 1319 : 2008 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 1298 : 2012 : REV A Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6890 : 2018 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4171 : 1998 Standard Specification for Fuel System Icing Inhibitors
ASTM D 4625 : 2003 Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)
ASTM D 4529 : 2017 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 7566 : 2014 : REV B Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 6615 : 2014 : REV A Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 3120 : 2008 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 7797 : 2012 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method
ASTM D 7668 : 2012 : REV A Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 5453 : 2008 : REV B Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 5453 : 2000 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 2386 : 1997 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4171 : 2003 : R2010 Standard Specification for Fuel System Icing Inhibitors
ASTM D 4809 : 2000 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 6615 : 2001 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASHRAE 79 : 0 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 4176 : 1993 : R1997 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 2276 : 2006 : R2014 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 1266 : 1998 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 7170 : 2009 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils<span class='unicode'>—</span>Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 3241 : 2001 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 7566 : 2012 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4176 : 2004 : R2019 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 5191 : 2018 : REV A Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 3701 : 2001 : R2006 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
ASTM D 7566 : 2011 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4052 : 1996 : R2002 : EDT 1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 5972 : 2002 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 6890 : 2003 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3828 : 2012 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 7042 : 2012 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 6615 : 2015 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 3828 : 1998 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 1298 : 2012 : REV B Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5453 : 2004 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6890 : 2006 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4865 : 2009 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 1319 : 2018 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 7566 : 2013 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 1322 : 2019 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM D 3241 : 2006 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 6615 : 2010 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 6615 : 2011 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 7170 : 2008 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils<span class='unicode'>—</span>Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 7797 : 2016 : REV A Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D 2624 : 2006 : REV A Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 6751 : 2006 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 5190 : 2007 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method) (Withdrawn 2012)
ASTM D 6866 : 2010 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7668 : 2012 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 5453 : 2012 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 4953 : 2015 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM D 4952 : 2002 : R2007 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 4294 : 2010 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 3241 : 2014 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3828 : 2007 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 4171 : 2011 Standard Specification for Fuel System Icing Inhibitors
ASTM D 4306 : 1997 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 3241 : 2002 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 6751 : 2007 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1319 : 2014 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 6751 : 2006 : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4809 : 2018 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 2887 : 2006 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2892 : 2011 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 7566 : 2016 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 1405 : 2001 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 4306 : 2015 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 7668 : 2014 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 3948 : 2004 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 6045 : 2012 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D 4529 : 2001 : R2006 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 6751 : 2018 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 3241 : 2014 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6751 : 2009 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7566 : 2011 : REV A Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 3242 : 1998 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 6751 : 2007 : REV B : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7566 : 2014 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4809 : 2013 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 1405 : 1995 : REV A Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 6379 : 1999 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates-High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 3241 : 2017 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 1266 : 2013 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 3338 : 2000 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 7042 : 2016 : EDT 2 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3948 : 2014 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 5191 : 2006 : EDT 1 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 6469 : 2012 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 2622 : 1998 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 3338 : 2004 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 3343 : 2005 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D 2386 : 2015 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 7345 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 6615 : 2006 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 1319 : 1999 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 3227 : 2002 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 7224 : 2005 : EDT 1 Standard Test Method for Determining Water Separation Characteristics of Kerosine-type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D 1840 : 2007 : R2013 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 4171 : 2016 Standard Specification for Fuel System Icing Inhibitors
ASTM D 7153 : 2005 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 4737 : 2009 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 3240 : 2005 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 7566 : 2016 : REV B Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 6751 : 2007 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7042 : 2010 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 7566 : 2015 : REV C Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 2386 : 2005 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 3828 : 2007 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 7945 : 2014 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D 6866 : 2006 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
ASTM D 1298 : 1999 : R2005 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 2386 : 2006 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4052 : 2009 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 3701 : 1999 : REV A Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5453 : 2008 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 2386 : 2006 : R2012 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4809 : 2009 : REV A : EDT 1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 6469 : 2008 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 1298 : 2012 : REV B : R2017 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6890 : 2007 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2018 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6866 : 2005 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
ASTM D 6890 : 2011 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 1298 : 2012 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6751 : 2012 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 1266 : 1987 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4306 : 2001 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 3241 : 2014 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7344 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 2622 : 2008 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2016 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 4952 : 1997 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 2892 : 1999 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 3241 : 2015 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 2892 : 2018 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 3241 : 2017 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7566 : 2015 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4306 : 2007 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 6890 : 2012 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4809 : 2000 : R2005 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 1322 : 2015 : EDT 1 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 7344 : 2011 : REV A Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D 1298 : 1999 : EDT 2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 5191 : 2001 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 7153 : 2015 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 4529 : 2001 : R2011 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 3240 : 1991 : R2001 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 4529 : 1995 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 6751 : 2014 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7170 : 2006 : REV A Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 7170 : 2016 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019)
ASTM D 1319 : 2002 : REV A Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 7566 : 2014 : REV C Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 5453 : 2005 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 2887 : 1999 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 1840 : 2007 : R2017 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 6615 : 2015 : REV A : R2019 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 3240 : 1991 : R1996 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
ASTM D 7154 : 2005 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM D 7344 : 2011 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D 2892 : 2010 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 6890 : 2016 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6045 : 1996 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D 7566 : 2015 : REV B Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 3701 : 2017 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
ASTM D 6890 : 2013 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 5191 : 2010 : REV A Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 7170 : 2011 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils<span class='unicode'>—</span>Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 2887 : 2006 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4952 : 2012 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 5001 : 2006 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D 6866 : 2006 : REV A Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
ASTM D 6045 : 2004 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D 7170 : 2012 : REV A Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 3120 : 2008 : R2019 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 5001 : 1990 : REV A : R1995 : EDT 1 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D 6615 : 2004 : REV A Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 6890 : 2010 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2386 : 2001 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 1840 : 2003 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 3242 : 2007 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 5972 : 2002 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 3227 : 2013 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 3948 : 2008 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 3241 : 2009 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 2887 : 2014 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5452 : 2012 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 5006 : 2003 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 7345 : 2008 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
ASTM D 2887 : 2001 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 7959 : 2016 Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
ASTM D 3828 : 2012 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 6045 : 2002 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D 1298 : 1999 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6751 : 2011 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 7344 : 2017 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 7153 : 2015 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
ASTM D 5452 : 2000 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 4809 : 1995 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 5453 : 2006 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6615 : 2011 : REV A Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 7566 : 2010 : REV A Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 2624 : 2007 : REV A Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 2276 : 2005 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 6890 : 2008 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2015 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7224 : 2007 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D 5001 : 2010 : R2014 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D 4953 : 1999 : REV A Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM D 6615 : 2005 : REV A Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 2892 : 2005 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 4176 : 2004 : R2009 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 6751 : 2015 : REV B Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4294 : 2008 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 1322 : 2015 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 3701 : 2001 : R2012 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
ASTM D 3242 : 2001 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 5190 : 1999 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
ASTM D 3948 : 2013 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 1840 : 2001 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 3343 : 2005 : R2015 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D 4625 : 1992 : R1998 Standard Test Method for Distillate Fuel Storage Stability at 43&#176C (110&#176F)
ASTM D 3343 : 2016 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D 7042 : 2011 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 3120 : 2003 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 6751 : 2015 : REV C Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 2386 : 2003 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4052 : 2011 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 5191 : 2012 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4306 : 2012 : REV A Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 6890 : 2010 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4953 : 2006 : R2012 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM D 6469 : 2014 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 6615 : 2002 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 4625 : 2016 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D 1319 : 2003 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 4052 : 2016 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 5452 : 2006 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 1322 : 2012 : EDT 2 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 7619 : 2012 : REV A Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 7344 : 2014 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
ASTM D 6751 : 2015 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 3343 : 1990 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D 7619 : 2010 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter <a href="#fn00005"></a>
ASTM D 7154 : 2015 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM D 1322 : 2012 : EDT 1 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6615 : 2015 : REV A Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 3242 : 2008 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 5001 : 2008 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D 4809 : 2009 : REV A Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 3242 : 2005 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3828 : 2016 : REV A Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 3241 : 2008 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 5191 : 2003 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 2622 : 2003 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 5001 : 2003 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D 6890 : 2016 : EDT 1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 6866 : 2004 Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
ASTM D 5452 : 2005 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 2892 : 2017 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 5453 : 2016 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 7566 : 2018 : REV A Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4294 : 2008 : REV A Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 7797 : 2017 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D 1319 : 2010 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 6379 : 2011 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 3241 : 2001 : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 6890 : 2011 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4306 : 2012 : REV B Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 4737 : 2009 : REV A Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 2892 : 2016 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 5191 : 1999 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 2624 : 2000 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 7566 : 2015 : REV A Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4171 : 2016 : REV A Standard Specification for Fuel System Icing Inhibitors
ASTM D 6890 : 2009 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2887 : 2001 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6751 : 2002 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 5006 : 2011 : R2016 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 6890 : 2011 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4294 : 2002 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 6751 : 2003 : REV A Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 3120 : 2003 : REV A Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1298 : 1999 : EDT 1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 7042 : 2004 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 7524 : 2010 : R2015 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
ASTM D 4737 : 2010 : R2016 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 1840 : 2007 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 5453 : 2003 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 4952 : 2002 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 6890 : 2016 : EDT 2 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4625 : 2004 Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)
ASTM D 2892 : 2018 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 2887 : 2016 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4865 : 1998 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
ASTM D 6615 : 2005 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 6045 : 2009 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D 6890 : 2013 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2624 : 2001 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 7619 : 2012 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 2887 : 2008 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5006 : 1996 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 2887 : 2019 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 4737 : 2003 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 2887 : 2018 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6751 : 2003 Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 6866 : 2004 : REV A Standard Test Methods for Determining the Biobased Content of Natural Range Materials Using Radiocarbon and Isotope Ratio Mass Spectrometry Analysis
ASTM D 3241 : 2005 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 3948 : 2007 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 2887 : 2012 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6751 : 2008 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 3241 : 2002 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 3701 : 2001 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
ASTM D 6751 : 2019 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4294 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 5191 : 2018 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 5453 : 2016 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 6615 : 2000 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 6615 : 2014 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 5191 : 2010 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4176 : 2004 : R2014 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 7668 : 2010 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils<char: emdash>Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 3241 : 2015 : EDT 2 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 2276 : 2006 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 7170 : 2010 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils<span class='unicode'>—</span>Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 2386 : 2015 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 5001 : 2010 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D 7619 : 2017 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 7566 : 2017 : REV A Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4625 : 2004 : R2009 Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)
ASTM D 1322 : 2008 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 3241 : 2014 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7042 : 2012 : REV A Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 7668 : 2014 : REV A Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 4294 : 2008 : REV A : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 7170 : 2006 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 4052 : 1996 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 4294 : 1998 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 6615 : 2004 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D 5191 : 2002 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 3828 : 2005 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 3948 : 2005 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 4809 : 2009 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 7872 : 2013 : R2018 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM D 4625 : 2014 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D 7619 : 2012 : REV B Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D 1322 : 2014 : REV A Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 2622 : 2010 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7524 : 2010 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels<span class='unicode'>—</span>High Performance Liquid Chromatograph (HPLC) Method
ASTM D 5191 : 2019 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)
ASTM D 1660 : 1987 Method of Test for Thermal Stability of Aviation Turbine Fuels (Withdrawn 1992)
ASTM D 1322 : 2014 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 7042 : 2016 : EDT 3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 2892 : 2017 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 6751 : 2015 : REV C : EDT 1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 2892 : 2019 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 6469 : 2017 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 3241 : 2019 : REV B Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 4809 : 2006 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
ASTM D 7344 : 2008 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D 6890 : 2003 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2887 : 2019 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6469 : 2011 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 7345 : 2007 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method
ASTM D 4737 : 1996 : REV A Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 1840 : 1996 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 6751 : 2007 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 3241 : 2002 : REV A : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 2386 : 2018 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 2887 : 2013 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3227 : 2004 : REV A : R2010 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 2887 : 2015 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3241 : 1998 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 6469 : 1999 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 7566 : 2018 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 7959 : 2015 Standard Test Method for Chloride Content Determination
ASTM D 5453 : 2019 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 3120 : 1996 : R2002 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1840 : 2002 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
ASTM D 2887 : 2015 : EDT 1 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 2622 : 2007 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 2887 : 2004 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 7170 : 2012 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method
ASTM D 7566 : 2014 : REV A Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 3227 : 2004 : REV A Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 7668 : 2017 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
ASTM D 3120 : 2006 : EDT 1 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 2892 : 2013 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 4306 : 2013 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 7566 : 2009 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 3828 : 2009 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 2622 : 1994 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
ASTM D 3948 : 1999 : REV A Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 7224 : 2014 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D 2624 : 2006 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 2892 : 2001 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 3120 : 2006 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 4952 : 2009 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 6379 : 2004 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 3241 : 2011 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 7042 : 2012 : EDT 1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 6751 : 2011 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 2622 : 2005 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 6890 : 2012 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2005 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4294 : 2003 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D 6890 : 2013 : REV B : EDT 1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7566 : 2017 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 5006 : 2002 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 2887 : 2002 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 7566 : 2017 : REV B Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 6890 : 2007 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 7345 : 2014 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 5191 : 2004 : REV A Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 6890 : 2015 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3241 : 2013 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6469 : 2008 : EDT 1 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM D 4737 : 2004 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 5453 : 2019 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 1298 : 1985 : R1990 : EDT 1 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D 6751 : 2011 : REV A Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 6866 : 2016 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D 5972 : 2015 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 1319 : 2015 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 6751 : 2015 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 2386 : 2019 Standard Test Method for Freezing Point of Aviation Fuels
ASTM D 4294 : 2016 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2016 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 5190 : 2001 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
ASTM D 3241 : 2014 : REV B : EDT 1 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6890 : 2015 : REV B Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 3227 : 2004 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 5191 : 2007 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 6866 : 2008 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D 1319 : 2013 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 2892 : 2015 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 4952 : 2012 : R2017 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM D 4052 : 2015 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 2624 : 2009 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 2892 : 2003 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 3338 : 2005 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 6890 : 2013 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7154 : 2005 : R2010 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
ASTM D 2887 : 2016 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 3120 : 2008 : R2014 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
ASTM D 1322 : 2012 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
ASTM D 4625 : 2016 : EDT 1 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
ASTM D 5191 : 2015 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 7945 : 2016 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
ASTM D 2892 : 2011 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 5006 :2011 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 2624 : 2002 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 7797 : 2016 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D 2276 : 2000 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D 3242 : 2011 : R2017 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3241 : 2016 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3227 : 2016 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 2887 : 2004 : REV A Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 6890 : 2007 : REV A Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 2624 : 2015 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 4529 : 2001 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 7224 : 2012 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D 3241 : 2012 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 5006 : 2010 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 7566 : 2016 : REV A Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 6751 : 2009 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 8073 : 2016 Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument
ASTM D 3338 : 2008 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 7566 : 2012 : REV A Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 1266 : 2007 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 3338 : 1995 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 4176 : 2004 : EDT 1 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 5006 : 2010 : EDT 1 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
ASTM D 6890 : 2004 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
ASTM D 4176 : 2002 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 7344 : 2007 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
ASTM D 7345 : 2016 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
ASTM D 3227 : 2002 : REV A Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
ASTM D 3343 : 1995 : R2000 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D 7566 : 2019 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5452 : 2008 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 5191 : 2010 : REV B Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 2887 : 2003 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D 5453 : 2003 : REV A Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 5972 : 2016 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 7797 : 2018 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
ASTM D 3828 : 2016 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D 5972 : 2005 : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 4171 : 2003 Standard Specification for Fuel System Icing Inhibitors
ASTM D 5972 : 2005 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 5191 : 2013 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 4953 : 2006 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
ASTM D 1319 : 2019 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 5191 : 2006 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
ASTM D 6751 : 2010 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
ASTM D 4052 : 2018 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4737 : 2010 Standard Test Method for Calculated Cetane Index by Four Variable Equation
ASTM D 2624 : 2007 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D 1266 : 2018 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM D 4294 : 1990 : R1998 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D 1319 : 2002 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
ASTM D 7224 : 2008 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
ASTM D 2892 : 2003 : REV A Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D 1405 : 2001 : R2006 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 3241 : 2004 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
ASTM D 4306 : 2012 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D 2622 : 2016 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D 7042 : 2014 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D 4176 : 2004 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D 6751 : 2002 : REV A Standard Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels
ASTM D 5972 : 1999 : REV A : EDT 1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
ASTM D 3241 : 2016 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 3241 : 2011 : REV A Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
ASTM D 6866 : 2018 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D 5453 : 2008 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D 1322 : 2018 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
ASTM D 3242 : 2011 Standard Test Method for Acidity in Aviation Turbine Fuel
ASTM D 3828 : 1997 Standard Test Methods for Flash Point by Small Scale Closed Tester
ASTM D 5453 : 2000 : EDT 1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
ASTM D 6379 : 2011 : R2019 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
ASTM D 7872 : 2013 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM D 4306 : 2012 : REV C Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

View more information
$176.78
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more