Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 1686 : 2019

Current
Current

The latest, up-to-date edition.

Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

15-01-2019

This test method covers the visual measurement of the color of thermally stable solids melting below 150°C.

1.1This test method covers the visual measurement of the color of thermally stable solids melting below 150°C. It is applicable only to materials in which the color-producing bodies present have light absorption characteristics quite similar to those of the standards used. The scope of this method covers the range of calibration which is 0 to 100 Pt-Co color.

1.2In determining the conformance of the test results using this method to applicable specifications, results shall be rounded off in accordance with the rounding-off method of Practice E29.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Weight% should be used rather than Mass%.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements see Sections 7 and 9.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 16
DocumentType
Test Method
Pages
3
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 8005 : 2018 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 5386 : 2016 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
ASTM D 8087 : 2018 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry
ASTM D 2439 : 2016 Standard Specification for Refined Phenol
ASTM D 3366 : 2018 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)

ASTM D 3438 : 2015 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM D 6809 : 2002 : R2016 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 6809 : 2020 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 8005 : 2018 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM D 3852 : 2006 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 3438 : 2007 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 8005 : 2015 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 6809 : 2002 : R2012 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 3852 : 2007 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 8005 : 2023 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 3438 : 2010 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM D 3438 : 2019 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 3852 : 1999 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
ASTM D 6809 : 2002 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 3852 : 2016 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
ASTM D 3852 : 2007 : R2012 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 6809 : 2002 : R2007 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 3438 : 1999 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
$90.04
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more