Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 2777 : 2008 : EDT 1

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

15-01-2008

1.1 This practice establishes uniform standards for estimating and expressing the precision and bias of applicable test methods for Committee D19 on Water.

1.2 Except as specified in 1.3, 1.4, and 1.5, this practice requires the task group proposing a new test method to carry out a collaborative study from which statements for precision (overall and single-operator standard-deviation estimates) and bias can be developed. This practice provides general guidance to task groups in planning and conducting such determinations of precision and bias.

1.3 If a full-scale collaborative study is not technically feasible, due to the nature of the test method or instability of samples, the largest feasible scaled-down collaborative study shall be conducted to provide the best possible limited basis for estimating the overall and single-operator standard deviations.

1.3.1 Examples of acceptable scaled-down studies are the local-area studies conducted by Subcommittee D19.24 on microbiological methods because of inherent sample instability. These studies involve six or more completely independent local-area analysts who can begin analysis of uniform samples at an agreed upon time.

1.3.2 If uniform samples are not feasible under any circumstances, a statement of single-operator precision will meet the requirements of this practice. Whenever possible, this statement should be developed from data generated by independent multiple operators, each doing replicate analyses on independent samples (of a specific matrix type), which generally fall within specified concentration ranges (see 7.2.5.2 (3)).

1.3.3 This practice is not applicable to methodology involving continuous sampling or continuous measurement, or both, of specific constituents and properties.

1.3.4 This practice is also not applicable to open-channel flow measurements.

1.4 A collaborative study that satisfied the requirements of the version of this practice in force when the study was conducted will continue to be considered an adequate basis for the precision-and-bias statement required in each test method. If the study does not satisfy the current minimum requirements for a collaborative study, a statement listing the study's deficiencies and a reference to this paragraph shall be included in the precision-and-bias statement as the basis for an exemption from the current requirements.

1.5 This paragraph relates to special exemptions not clearly acceptable under 1.3 or 1.4. With the approval of Committee D19 on the recommendation of the Results Advisor and the Technical Operations Section of the Executive Subcommittee of Committee D19, a statement giving a compelling reason why compliance with all or specific points of this practice cannot be achieved will meet both ASTM requirements (1) and the related requirements of this practice. In addition, Committee D19, through a Main Committee ballot, may approve publication of a Preliminary Standard Method for a period not to exceed 5 years. Preliminary Standards must contain a minimum of a single-operator precision-and-bias statement and a Quality Control section based on the single operator data. Publication of a Preliminary Standard is conditional on the approval of a full D 2777 collaborative study design for the standard. Precision-and-bias statements authorized by this paragraph shall include the date of approval by Committee D19.

1.6 In principle, all test methods are covered by this practice.

1.7 In Section 12 this practice shows exemplary precision-and-bias-statement formats for: (1) test methods yielding a numerical measure, (2) test methods yielding a non-numerical report of success or failure based on criteria specified in the procedure, and (3) test methods specifying that procedures in another ASTM test method are to be used with only insignificant modifications.

1.8 All studies, even those exempt from some requirements under 1.3 or 1.5, shall receive approval from the Results Advisor before being conducted (see Section 8) and after completion (see Section 13).

1.9 This practice satisfies the QC requirements of Practice D 5847.

1.10 It is the intent of this practice that task groups make every effort to retain all the data from their round-robin studies. Values should not be eliminated unless solid evidence exists for their exclusion. The Results Advisor should work closely with the task groups to effect this goal.

Committee
D 19
DocumentType
Standard Practice
Pages
19
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7677 : 2016 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
ASTM D 7168 : 2016 Standard Test Method for <sup>99</sup>Tc in Water by Solid Phase Extraction Disk
ASTM D 5389 : 1993 : R2013 Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
ASTM D 4778 : 2015 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
ASTM F 316 : 2003 : R2011 Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
ASTM D 1890 : 2015 : R2017 Standard Test Method for Beta Particle Radioactivity of Water
ASTM D 8001 : 2016 : EDT 1 Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
ASTM D 1691 : 2017 Standard Test Methods for Zinc in Water
ASTM D 5256 : 2014 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
ASTM D 1246 : 2016 Standard Test Method for Bromide Ion in Water
ASTM D 3590 : 2017 Standard Test Methods for Total Kjeldahl Nitrogen in Water
ASTM D 5284 : 2009 : R2017 Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
ASTM D 6502 : 2010 : R2015 Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
ASTM D 7066 : 2004 : R2017 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
ASTM D 4107 : 2008 : R2013 Standard Test Method for Tritium in Drinking Water
ASTM D 6301 : 2013 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water
ASTM D 1179 : 2016 Standard Test Methods for Fluoride Ion in Water
ASTM D 5391 : 2014 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023)
ASTM D 3875 : 2015 Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines
ASTM D 6071 : 2014 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D 5315 : 2004 : R2017 : EDT 1 Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization
ASTM D 5831 : 2017 Standard Practice for Screening Fuels in Soils
ASTM D 5811 : 2008 : R2013 Standard Test Method for Strontium-90 in Water
ASTM D 4191 : 2015 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
ASTM D 8026 : 2016 Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D 5086 : 2001 : R2013 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
ASTM D 2187 : 2017 Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
ASTM D 513 : 2016 Standard Test Methods for Total and Dissolved Carbon Dioxide in Water
ASTM D 7678 : 2017 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
ASTM D 4409 : 1995 : R2014 Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters (Withdrawn 2023)
ASTM D 5673 : 2016 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
ASTM D 7937 : 2015 Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
ASTM D 1125 : 2014 Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023)
ASTM D 512 : 2012 Standard Test Methods for Chloride Ion In Water (Withdrawn 2021)
ASTM D 7284 : 2013 : R2017 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
ASTM D 4790 : 2014 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
ASTM D 516 : 2016 Standard Test Method for Sulfate Ion in Water
ASTM D 6855 : 2017 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
ASTM D 7730 : 2017 Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 6501 : 2015 Standard Test Method for Phosphonate in Brines
ASTM D 1783 : 2001 : R2012 : EDT 1 Standard Test Methods for Phenolic Compounds in Water
ASTM D 5464 : 2016 Standard Test Method for pH Measurement of Water of Low Conductivity
ASTM D 7644 : 2016 Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 1126 : 2017 Standard Test Method for Hardness in Water
ASTM D 6512 : 2007 : R2014 Standard Practice for Interlaboratory Quantitation Estimate (Withdrawn 2023)
ASTM D 7725 : 2017 Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
ASTM D 5089 : 1995 : R2014 Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters (Withdrawn 2023)
ASTM D 1067 : 2016 Standard Test Methods for Acidity or Alkalinity of Water
ASTM D 4922 : 2009 : R2016 : EDT 1 Standard Test Method for Determination of Radioactive Iron in Water
ASTM D 7597 : 2016 : R2017 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 5129 : 1995 : R2014 : EDT 1 Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions (Withdrawn 2023)
ASTM D 857 : 2017 Standard Test Method for Aluminum in Water
ASTM D 8025 : 2016 Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
ASTM D 5130 : 1995 : R2014 Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method (Withdrawn 2023)
ASTM D 3697 : 2017 Standard Test Method for Antimony in Water
ASTM D 7485 : 2016 Standard Test Method for Determination of Nonylphenol, p-<emph type="bdit">tert</emph >-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 3861 : 1991 : R2011 Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters (Withdrawn 2020)
ASTM D 5072 : 2009 : R2016 Standard Test Method for Radon in Drinking Water
ASTM D 5543 : 2015 Standard Test Method for Low-Level Dissolved Oxygen in Water
ASTM D 3373 : 2017 Standard Test Method for Vanadium in Water
ASTM D 3082 : 2015 Standard Test Method for Boron in Water
ASTM D 5242 : 1992 : R2013 Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
ASTM D 7535 : 2009 : R2015 Standard Test Method for Lead-210 in Water (Withdrawn 2024)
ASTM D 7742 : 2017 Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 3651 : 2016 Standard Test Method for Barium in Brackish Water, Seawater, and Brines
ASTM D 7731 : 2017 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 1068 : 2015 Standard Test Methods for Iron in Water
ASTM D 859 : 2016 Standard Test Method for Silica in Water
ASTM D 4458 : 2015 Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
ASTM D 5015 : 2015 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D 7599 : 2016 : R2017 Standard Test Method for Determination of Diethanolamine, Triethanolamine, <emph type="ital">N</emph>-Methyldiethanolamine and <emph type="ital">N</emph >-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 1688 : 2017 Standard Test Methods for Copper in Water
ASTM D 1886 : 2014 Standard Test Methods for Nickel in Water
ASTM D 2688 : 2015 : EDT 1 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
ASTM D 5176 : 2008 : R2015 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
ASTM D 7783 : 2013 Standard Practice for Within-laboratory Quantitation Estimation (WQE)
ASTM D 1941 : 1991 : R2013 Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
ASTM D 5246 : 2015 Standard Test Method for Isolation and Enumeration of <emph type="ital">Pseudomonas aeruginosa </emph> from Water
ASTM D 5997 : 2015 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D 5085 : 2002 : R2013 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
ASTM D 5128 : 2014 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D 4793 : 2009 : R2017 Standard Test Method for Sequential Batch Extraction of Waste with Water
ASTM D 5904 : 2002 : R2017 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D 3865 : 2009 : R2015 Standard Test Method for Plutonium in Water (Withdrawn 2024)
ASTM D 7511 : 2012 : R2017 : EDT 1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D 5243 : 1992 : R2013 Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
ASTM D 6807 : 2017 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from<brk/>2 to 100 μS/cm
ASTM D 4412 : 2015 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
ASTM D 5413 : 1993 : R2013 Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
ASTM D 7237 : 2018 Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
ASTM D 6698 : 2014 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water (Withdrawn 2023)
ASTM D 4456 : 2017 Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
ASTM D 5996 : 2016 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
ASTM D 6908 : 2006 : R2017 Standard Practice for Integrity Testing of Water Filtration Membrane Systems
ASTM D 3645 : 2015 Standard Test Methods for Beryllium in Water
ASTM D 7645 : 2016 Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 7598 : 2016 : R2017 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 3454 : 2018 Standard Test Method for Radium-226 in Water
ASTM D 3561 : 2016 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D 5257 : 2017 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
ASTM D 8018 : 2015 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D 3977 : 1997 : R2013 : EDT 1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D 4282 : 2015 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
ASTM D 5174 : 2007 : R2013 Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry (Withdrawn 2022)
ASTM D 4658 : 2015 Standard Test Method for Sulfide Ion in Water (Withdrawn 2024)
ASTM D 4193 : 2008 : R2013 : EDT 1 Standard Test Method for Thiocyanate in Water
ASTM D 6994 : 2015 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
ASTM D 4327 : 2017 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 6091 : 2007 : R2014 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error (Withdrawn 2023)
ASTM D 4190 : 2015 Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy
ASTM D 5627 : 2017 Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
ASTM D 3649 : 2006 : R2014 Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water (Withdrawn 2023)
ASTM D 3975 : 1993 : R2014 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM D 5614 : 1994 : R2014 Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs (Withdrawn 2023)
ASTM D 7315 : 2017 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
ASTM D 3972 : 2009 : R2015 Standard Test Method for Isotopic Uranium in Water by Radiochemistry (Withdrawn 2024)
ASTM D 6317 : 2015 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D 7968 : 2017 : REV A Standard Test Method for Determination of Polyfluorinated Compounds in Soil by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 7363 : 2013 : REV A Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
ASTM D 3856 : 2011 : R2015 Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water (Withdrawn 2024)
ASTM D 1293 : 2018 Standard Test Methods for pH of Water
ASTM D 1687 : 2017 Standard Test Methods for Chromium in Water
ASTM D 5905 : 1998 : R2018 Standard Practice for the Preparation of Substitute Wastewater
ASTM D 8084 : 2017 Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water
ASTM D 1498 : 2014 Standard Test Method for Oxidation-Reduction Potential of Water
ASTM D 4517 : 2015 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
ASTM D 7510 : 2010 : R2016 : EDT 1 Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
ASTM E 800 : 2014 Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM D 5613 : 1994 : R2014 Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers (Withdrawn 2023)
ASTM D 3869 : 2015 Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
ASTM D 6503 : 2019 Standard Test Method for Enterococci in Water Using Enterolert
ASTM D 1253 : 2014 Standard Test Method for Residual Chlorine in Water
ASTM D 7979 : 2017 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 8024 : 2016 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D 2791 : 2013 Standard Test Method for On-line Determination of Sodium in Water
ASTM D 3223 : 2017 Standard Test Method for Total Mercury in Water
ASTM D 3867 : 2016 Standard Test Methods for Nitrite-Nitrate in Water
ASTM D 3868 : 2015 Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
ASTM D 2036 : 2009 : R2015 Standard Test Methods for Cyanides in Water
ASTM D 4785 : 2008 : R2013 : EDT 1 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
ASTM D 5317 : 1998 : R2017 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
ASTM D 2460 : 2007 : R2013 Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water (Withdrawn 2022)
ASTM D 3919 : 2015 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D 6569 : 2014 Standard Test Method for On-Line Measurement of pH (Withdrawn 2023)
ASTM D 8002 : 2015 : EDT 1 Standard Test Method for Modified Fouling Index (MFI-0.45) of Water (Withdrawn 2024)
ASTM D 1426 : 2015 Standard Test Methods for Ammonia Nitrogen In Water
ASTM D 3557 : 2017 Standard Test Methods for Cadmium in Water
ASTM D 3858 : 1995 : R2014 Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method (Withdrawn 2023)
ASTM D 7600 : 2016 : R2017 Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 3558 : 2015 Standard Test Methods for Cobalt in Water
ASTM D 5388 : 1993 : R2013 Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method
ASTM D 3670 : 1991 : R2014 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D 4130 : 2015 Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines (Withdrawn 2024)
ASTM D 1429 : 2013 Standard Test Methods for Specific Gravity of Water and Brine (Withdrawn 2022)
ASTM D 5847 : 2002 : R2012 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 6238 : 1998 : R2017 Standard Test Method for Total Oxygen Demand in Water
ASTM D 4192 : 2015 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
ASTM D 8083 : 2016 Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
ASTM D 6239 : 2009 : R2015 Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
ASTM D 858 : 2017 Standard Test Methods for Manganese in Water
ASTM D 6919 : 2017 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
ASTM D 5173 : 2015 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
ASTM D 5544 : 2016 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
ASTM D 6529 : 2011 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50<span class='unicode'>–</span>1000 <span class='unicode'>μ</span>S/cm (Withdrawn 2020)
ASTM D 7574 : 2016 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 5462 : 2013 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
ASTM D 1252 : 2006 : R2012 : EDT 1 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
ASTM D 3372 : 2017 Standard Test Method for Molybdenum in Water
ASTM D 6234 : 2013 Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
ASTM D 1943 : 2005 : R2012 Standard Test Method for Alpha Particle Radioactivity of Water
ASTM D 511 : 2014 Standard Test Methods for Calcium and Magnesium In Water
ASTM D 3483 : 2014 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
ASTM D 3559 : 2015 Standard Test Methods for Lead in Water (Withdrawn 2024)
ASTM D 5412 : 1993 : R2017 : EDT 1 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
ASTM D 4839 : 2003 : R2017 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D 7575 : 2011 : R2017 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
ASTM E 1600 : 2015 Standard Test Methods for Determination of Gold in Cyanide Solutions
ASTM D 596 : 2001 : R2018 Standard Guide for Reporting Results of Analysis of Water
ASTM D 5390 : 1993 : R2013 Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
ASTM D 8193 : 2018 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
ASTM D 4519 : 2016 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D 1292 : 2015 Standard Test Method for Odor in Water
ASTM D 5612 : 1994 : R2018 Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
ASTM D 7126 : 2015 Standard Test Method for On-Line Colorimetric Measurement of Silica
ASTM D 3352 : 2015 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines

View more information
$135.86
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more