ASTM D 2939 : 2003
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012)
Available format(s)
Hardcopy , PDF
Withdrawn date
10-07-2012
Language(s)
English
Published date
10-07-2003
CONTAINED IN VOL. 04.04, 2009 Ways to sample and test protective coating quality emulsified bitumens for roofs and metals.
1.1 These test methods cover procedures for sampling and testing emulsified bitumens used in relatively thick films as protective coatings for metals, built-up roofs, and bituminous pavements.
1.2 The test methods appear in the following order:
| Test Procedures for All Coatings | Section |
| Sampling | 4 |
| Uniformity | 5 |
| Resistance to Freezing | 6 |
| Weight per Gallon | 7 |
| Residue by Evaporation | 8 |
| Volatiles | 9 |
| Ash Content | 10 |
| Water Content | 11 |
| Flash Point | 12 |
| Drying Time | 13 |
| Resistance to Heat | 14 |
| Resistance to Water | 15 |
| Flexibility | 16 |
| Tests used primarily for coatings used over metals and built-up roofs | |
| Brush-Application Behavior | 17 |
| Spray-Application Behavior | 18 |
| Wet Flow | 19 |
| Direct Flame Test | 20 |
| Solubility of Residue in Trichloroethylene | 21 |
| Tests used primarily for coatings used over bituminous pavements | |
| Wet Film Continuity | 22 |
| Resistance to Volatilization | 23 |
| Solubility of Residue in Carbon Disulfide | 24 |
| Resistance to Kerosine | 25 |
| Resistance to Impact | 26 |
| Resistance to Impact After Accelerated Weathering | 27 |
| Aggregate (Sand) Content in Bituminous Emulsions | 28 |
| Precision Bias | 29 |
1.3 The values stated in SI units are to be regarded as standard. The values in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 08
|
| DevelopmentNote |
Supersedes ASTM D 1010 and ASTM D 1167. (02/2002)
|
| DocumentType |
Test Method
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| UNE 104281-3-7:1986 | Identical |
| UNE 104281-3-8:1986 | Identical |
| UNE 104281-3-9:1986 | Identical |
| UNE 104281-3-13:1986 | Identical |
| UNE 104281-3-10:1986 | Identical |
| UNE 104281-3-12:1986 | Identical |
| UNE 104281-3-1:1986 | Identical |
| UNE 104281-3-11:1986 | Identical |
| UNE 104281-3-5:1986 | Identical |
| ASTM D 6805 : 2002 : R2008 | Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions |
| ASTM D 5404/D5404M : 2012 | Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator |
| ASTM D 4866/D4866M : 1988 : R2017 | Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
| ASTM D 2832 : 1992 : R2011 | Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
| ASTM D 4866 : 1988 : R2003 : EDT 1 | Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
| ASTM D 1187/D1187M : 1997 : R2011 : EDT 1 | Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal |
| ASTM C 647 : 2008 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM D 3320 : 2000 | Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) |
| ASTM D 5404 : 2003 | Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator |
| ASTM D 5727/D5727M : 2000 : R2011 : EDT 1 | Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type) |
| ASTM C 647 : 2008 : R2013 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM D 4866 : 1988 : R1997 : EDT 1 | Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
| ASTM D 2832 : 1992 : R2016 | Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
| ASTM D 5727/D5727M : 2000 : R2017 | Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type) |
| ASTM D 6945 : 2003 | Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade) |
| ASTM D 3320 : 2000 : R2004 : EDT 1 | Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) (Withdrawn 2013) |
| ASTM D 6356 : 1998 | Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 5404/D5404M : 2012 : R2017 | Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator |
| ASTM D 1856 : 2009 | Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
| ASTM D 6945/D6945M : 2003 : R2017 | Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade) |
| ASTM D 6805 : 2002 : EDT 1 | Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions |
| ASTM D 5727 : 2000 | Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type) |
| ASTM D 4866/D4866M : 1988 : R2011 : EDT 1 | Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures |
| ASTM D 3320/D3320M : 2018 | Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type) |
| ASTM D 6946/D6946M : 2013 : EDT 1 | Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) (Withdrawn 2022) |
| ASTM D 1227/D1227M : 2013 : R2019 : EDT 1 | Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing |
| ASTM D 1187 : 1997 | Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal |
| ASTM D 6946 : 2003 | Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) (Withdrawn 2012) |
| ASTM D 6805 : 2002 | Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions |
| ASTM D 5727 : 2000 : R2004 : EDT 1 | Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type) |
| ASTM D 2832 : 1992 : R1999 | Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
| ASTM D 3747 : 1979 : R2000 : EDT 1 | Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ASTM D 8099/D8099M : 2017 | Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type) |
| ASTM D 6848 : 2002 | Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing (Withdrawn 2011) |
| ASTM D 2832 : 1992 : R2005 | Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
| ASTM D 1856 : 2009 : R2015 | Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
| ASTM D 3747 : 1979 : R2007 | Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation (Withdrawn 2016) |
| ASTM D 6805 : 2002 : R2016 | Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions |
| ASTM D 1187 : 1997 : R2002 : EDT 1 | Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal |
| ASTM D 6945/D6945M : 2003 : R2011 : EDT 1 | Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade) |
| ASTM D 609 : 2017 : REDLINE | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASTM D 3699 : 2013-05 | SPECIFICATION FOR KEROSINE |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| ASTM C 670 : 2015 : REDLINE | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
$122.77
Including GST where applicable
AUD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.