Standard Test Methods for Steel Tire Cords (Withdrawn 2023)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

19-06-2014

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 07.01, 2015 Describes the testing of cords made from steel that are specifically designed for use in the reinforcement of pneumatic tires.

1.1These test methods cover the testing of cords made from steel that are specifically designed for use in the reinforcement of pneumatic tires. By agreement, these test methods may be used to test similar cords or filaments used for reinforcing other rubber products. The steel cords may be wound on spools or beams. The steel cords may also be woven into fabric, in which case they must be removed from the fabric prior to testing.

Note 1—For other methods of testing tire cords and tire cord fabrics, refer to Methods D885, Test Methods D1871, Specifications D122, and Test Methods D2692 and D2970/D2970M. For tolerances on tire cords and tire cord fabrics, refer to Specifications D122 and Methods D885.

1.2These test methods include test procedures only; they do not establish specifications or tolerances.

1.3This test method includes the following sections:

Subject	Section
Adhesion of Steel Cords and Filaments to Elastomers	16
Brass Coating Composition and Mass	14, 15
Breaking Force (Strength)	10
Construction	12
Data Form for Reporting Test Results	Appendix X1
Elongation at Break	10
Elongation Between Defined Forces (EDF)	11
Flare	8
Lay	12
Linear Density	9
Visual Appearance	8
Nomenclature System	Annex A1
Residual Torsions	8
Straightness	8
Thickness and Out-of-Roundness	13

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 14.3 and Note 11.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Committee	D 13
DocumentType	Test Method
Pages	17
ProductNote	Reconfirmed 2014
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 2969 : 2004 : R2010

ASTM D 6320/D6320M : 2010 : R2014	Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel (Withdrawn 2023)
ASTM D 6477 : 2013 : EDT 1	Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics (Withdrawn 2022)

ASTM D 1871 : 2002	Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
ASTM D 1871 : 2004 : R2010	Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
ASTM D 2692 : 2007	Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
ASTM D 6477 : 2003	Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 6477 : 2022	Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 1871 : 2004	Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
ASTM D 2229 : 1999	Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 2229 : 2004 : EDT 1	Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 1871 : 2004 : R2014	Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023)
ASTM D 122 : 1984 : EDT 1	Tolerances for Tire Fabrics Other than Tire Cord Fabrics
ASTM D 885 : 2001	Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Man-Made Organic-Base Fibers
ASTM D 6477 : 2013 : EDT 1	Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics (Withdrawn 2022)
ASTM D 4393 : 2000	Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds
ASTM D 2229 : 2002	Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 6477 : 2013	Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 2904 : 1997	Standard Practice for Interlaboratory Testing of a Textile Test Method that Produces Normally Distributed Data
ASTM D 2970/D2970M : 1998 : EDT 1	Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments
ASTM D 6477 : 2002	Standard Terminology Relating to Tire Cord and Fabrics
ASTM D 6477 : 2002 : REV A	Standard Terminology Relating to Tire Cord and Fabrics
ASTM D 76 : 1999	Standard Specification for Tensile Testing Machines for Textiles
ASTM D 4393 : 2004	Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds
ASTM E 663 : 1986 : R1991 : EDT 1	Practice for Flame Atomic Absorption Analysis (Withdrawn 1997)
ASTM D 2229 : 2010	Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 2692 : 2004	Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
ASTM D 2692 : 1998	Standard Test Method for Air Wicking of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
ASTM D 6477 : 2011	Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 6477 : 1999	Standard Terminology Relating to Tire Cord and Fabrics
ASTM D 4393 : 2002	Standard Test Method for Strap Peel Adhesion of Reinforcing Cords or Fabrics to Rubber Compounds
ASTM D 1871 : 1998	Standard Test Methods for Adhesion of Single-Filament Steel Wire to Rubber
ASTM D 123 : 2001	Standard Terminology Relating to Textiles
ASTM D 2229 : 2010 : R2014	Standard Test Method for Adhesion Between Steel Tire Cords and Rubber (Withdrawn 2023)
ASTM D 2229 : 2004	Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
ASTM D 6477 : 2004	Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
ASTM D 6477 : 2009	Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics

View more information

$135.86

Including GST where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Log into your Account

ASTM D 2969 : 2004 : R2014

Current

Abstract

Scope

General Product Information

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory

Access your standards online with a subscription