Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 3105 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
Available format(s)

Hardcopy , PDF

Superseded date

09-01-2024

Language(s)

English

Published date

17-02-2017

This index is provided for reference to aid in the selection of procedures and test methods used in the evaluation of sheet and liquid roofing materials, as appropriate.

1.1This index is provided for reference to aid in the selection of procedures and test methods used in the evaluation of sheet and liquid roofing materials, as appropriate. Composition specifications and analytical methods in general, as well as tests on raw materials, are not included, the scope being limited to procedures used in the evaluation of the materials as received or as finished materials or coatings.

Committee
D 08
DocumentType
Standard
Pages
5
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 6382/D6382M : 1999 : R2022 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM D 2196 : 2015 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
ASTM D 2240 : 2000 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 1203 : 1994 : R1999 : EDT 1 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
ASTM D 2697 : 2003 : R2008 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 2137 : 2011 : R2018 Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 1004 : 2008 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D 3278 : 2020 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 5869 : 2007 : REV A Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM D 2136 : 2002 : R2007 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D 1475 : 2013 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 2136 : 2019 : EDT 1 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D 1002 : 1999 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 2290 : 2016 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D 1149 : 2016 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2697 : 2022 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 1922 : 2008 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 2137 : 1994 : R2000 Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 2136 : 2002 : R2012 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D 2196 : 2010 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D 2290 : 2019 : REV A Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D 1475 : 1998 : R2012 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 1204 : 2007 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 1653 : 1993 : R1999 : EDT 1 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 1824 : 1995 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 1709 : 2022 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 2697 : 2003 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM E 96/E96M : 2022 : REV A : EDT 1 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 1203 : 2023 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods
ASTM D 1709 : 2004 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 5869 : 2004 Standard Practice for Dark Oven Heat Exposure of Bituminous Materials
ASTM D 1004 : 1994 : REV A Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM E 96/E96M : 2022 : REV A Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 1004 : 2009 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D 228/D228M : 2021 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
ASTM D 3111 : 1999 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D 1790 : 2002 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D 1499 : 2013 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
ASTM D 2196 : 2005 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D 3746/D3746M : 1985 : R2022 Standard Test Method for Impact Resistance of Bituminous Roofing Systems
ASTM D 1790 : 2014 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D 1204 : 2014 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 3111 : 2010 : R2018 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D 3389 : 2016 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM E 162 : 2021 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E 96/E96M : 2021 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 1475 : 1985 Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
ASTM G 154 : 2016 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM D 1203 : 2022 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods
ASTM D 1640/D1640M : 2014 : R2018 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings
ASTM D 2369 : 1998 Standard Test Method for Volatile Content of Coatings
ASTM D 1004 : 2013 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D 3278 : 1996 : EDT 1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 2291/D2291M : 2016 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
ASTM D 1922 : 2015 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 7379/D7379M : 2008 : R2015 : EDT 1 Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
ASTM D 1922 : 2023 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 1922 : 2006 : REV A Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 7379/D7379M : 2008 : R2021 Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
ASTM D 1824 : 2016 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 1004 : 1994 : REV A : R2003 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D 2136 : 1994 : R1998 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D 4799/D4799M : 2017 : R2023 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D 1042 : 2006 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM D 2240 : 2004 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1002 : 2010 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 3389 : 2021 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM D 3389 : 2010 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM D 4073 : 2006 : R2013 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
ASTM D 3746/D3746M : 1985 : R2015 : EDT 1 Standard Test Method for Impact Resistance of Bituminous Roofing Systems
ASTM D 1790 : 1999 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM E 96/E96M : 2022 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM D 6383/D6383M : 1999 : R2021 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
ASTM D 5635/D5635M : 2018 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
ASTM D 93 : 2019 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D 1149 : 2015 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 1310 : 2014 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 1499 : 2013 : R2021 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
ASTM D 2291/D2291M : 2022 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
ASTM D 5636/D5636M : 1994 : R2017 Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
ASTM D 2369 : 1981 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM D 1042 : 2022 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
ASTM D 1204 : 2008 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 3389 : 2005 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM D 543 : 2021 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D 5869 : 2007 : REV A : R2013 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM D 412 : 2016 : EDT 1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 2369 : 2001 Standard Test Method for Volatile Content of Coatings
ASTM D 1042 : 1993 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM D 1475 : 1998 : R2003 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ASTM D 413 : 1998 Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate
ASTM G 154 : 2023 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials
ASTM D 1310 : 1986 : R1997 : EDT 1 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 1709 : 2015 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 2369 : 2010 Standard Test Method for Volatile Content of Coatings
ASTM D 5869 : 2004 : REV A Standard Practice for Dark Oven Heat Exposure of Bituminous Materials
ASTM D 1004 : 2003 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D 2290 : 2004 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
ASTM D 93 : 1990 : EDT 1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
ASTM D 1149 : 2007 Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
ASTM D 6383/D6383M : 1999 : R2015 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
ASTM D 2697 : 2003 : R2014 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 3278 : 1982 : EDT 1 Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus
ASTM D 3278 : 2021 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 3045 : 1992 : R1997 Standard Practice for Heat Aging of Plastics Without Load
ASTM D 1204 : 2014 : R2020 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 2240 : 2004 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1004 : 2007 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D 3045 : 2018 Standard Practice for Heat Aging of Plastics Without Load
ASTM D 1203 : 2016 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
ASTM D 2565 : 2023 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
ASTM D 1310 : 2001 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 2697 : 1986 : R1998 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 1002 : 2005 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 471 : 2016 : REV A : R2021 Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 2697 : 2003 : R2021 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 1922 : 2003 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 2136 : 2002 : EDT 1 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D 1709 : 2009 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 4073 : 1994 : R1998 : EDT 1 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
ASTM D 1709 : 1998 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 1653 : 2013 : R2021 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 1042 : 2001 : REV A Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM D 1203 : 2021 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods
ASTM D 4073 : 1994 : R2003 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
ASTM D 2369 : 2020 Standard Test Method for Volatile Content of Coatings
ASTM D 7105 : 2006 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
ASTM D 5636/D5636M : 1994 : R2022 Standard Test Method for Low-Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
ASTM D 1475 : 1960 : R1968 Standard Method Of Test For Density Of Paint, Varnish, Lacquer, And Related Products
ASTM D 2196 : 2018 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscountess
ASTM D 1203 : 2010 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
ASTM D 2565 : 1992 Standard Practice for Operating Xenon Arc-Type Light-Exposure Apparatus with and Without Water for Exposure of Plastics
ASTM D 1709 : 2001 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1002 : 2010 : R2019 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 2137 : 2010 Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM G 155 : 2021 Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials
ASTM D 1499 : 2005 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
ASTM D 816 : 2006 : R2023 Standard Test Methods for Rubber Cements
ASTM E 96/E96M : 2016 Standard Test Methods for Water Vapor Transmission of Materials
ASTM D 1042 : 2012 : R2017 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
ASTM D 2369 : 2007 Standard Test Method for Volatile Content of Coatings
ASTM D 1824 : 1966 : R1972 Standard Method Of Test For Apparent Viscosity Of Plastisols And Organosols At Low Shear Rates By Brookfield Viscometer
ASTM D 3389 : 2015 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM D 1653 : 2003 : R2008 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 2290 : 2000 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
ASTM D 1149 : 2018 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 5405/D5405M : 1998 : R2015 Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
ASTM D 2136 : 2002 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D 2565 : 1999 Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
ASTM D 1653 : 2003 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 1475 : 1998 : R2008 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 2137 : 2005 Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 2369 : 2010 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM D 638 : 2014 Standard Test Method for Tensile Properties of Plastics
ASTM D 2240 : 2015 : R2021 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1824 : 1995 : R2010 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 5405/D5405M : 1998 : R2021 Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
ASTM D 1709 : 2016 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 5869 : 1995 : R2000 : EDT 1 Standard Practice for Dark Oven Heat Exposure of Bituminous Materials
ASTM D 5602/D5602M : 2018 : R2022 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
ASTM D 1239 : 2022 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D 2369 : 1993 Standard Test Method for Volatile Content of Coatings
ASTM D 2240 : 2002 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1922 : 2015 : R2020 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 750 : 2012 : R2021 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 1310 : 2001 : R2007 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 543 : 2020 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D 2565 : 1970 Standard Recommended Practice For Operating Xenon Arc-Type (Water-Cooled) Light - And Water-Exposure Apparatus For Exposure Of Plastics
ASTM D 1239 : 2022 : REV A Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D 2240 : 2015 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2007 : R2012 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 1709 : 2008 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 2523 : 2000 : R2006 Standard Practice for Testing Load-Strain Properties of Roofing Membranes
ASTM D 1042 : 2001 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
ASTM D 5869 : 2007 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM D 1922 : 2003 : REV A Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 2240 : 2003 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1310 : 2014 : R2021 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D 823 : 2018 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D 2523 : 2000 Standard Practice for Testing Load-Strain Properties of Roofing Membranes
ASTM D 1149 : 1978 : REV A Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
ASTM D 5683/D5683M : 1995 : R2017 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
ASTM D 2240 : 2002 : REV B Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 93 : 2000 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 5683/D5683M : 1995 : R2022 Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
ASTM D 1204 : 1994 : EDT 1 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 3389 : 1994 : R1999 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader)
ASTM G 155 : 2013 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM D 1002 : 2001 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D 2290 : 2000 : EDT 1 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
ASTM D 93 : 1985 Standard Test Method for Flash Point by Pensky-Martens Closed Tester
ASTM D 750 : 2012 : R2017 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 1499 : 1999 Standard Practice Filtered Open-Flame Carbon-Arc Type Exposures of Plastics
ASTM D 2565 : 2016 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
ASTM D 5602/D5602M : 2018 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
ASTM D 570 : 2022 Standard Test Method for Water Absorption of Plastics
ASTM D 4073 : 2006 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
ASTM D 1790 : 2008 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D 1790 : 2021 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D 2240 : 2015 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1203 : 1994 : R2003 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
ASTM D 5869 : 1995 : R2002 Standard Practice for Dark Oven Heat Exposure of Bituminous Materials
ASTM D 2290 : 2019 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D 1922 : 2005 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1239 : 2007 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D 3111 : 2010 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
ASTM D 2369 : 1995 Standard Test Method for Volatile Content of Coatings
ASTM D 2523 : 2013 Standard Practice for Testing Load-Strain Properties of Roofing Membranes
ASTM D 2369 : 2004 Standard Test Method for Volatile Content of Coatings
ASTM D 1709 : 2016 : REV A : EDT 1 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 2290 : 2012 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM G 21 : 2015 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM D 4799/D4799M : 2017 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D 2240 : 2005 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1653 : 2013 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D 2369 : 1990 Standard Test Method for Volatile Content of Coatings
ASTM D 1709 : 2003 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 2196 : 2018 : EDT 1 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
ASTM D 1922 : 2000 : REV A Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 1239 : 2014 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D 1239 : 1998 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D 1204 : 2002 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D 1203 : 2020 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
ASTM D 2369 : 2003 Standard Test Method for Volatile Content of Coatings
ASTM G 21 : 2015 : R2021 : EDT 1 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM D 2240 : 2005 : R2010 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 570 : 1998 : R2018 Standard Test Method for Water Absorption of Plastics
ASTM D 1824 : 1995 : R2002 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM E 162 : 2016 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM D 1475 : 1998 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ASTM D 2369 : 2010 : R2015 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM D 3278 : 1996 : R2004 : EDT 1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 2196 : 1999 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D 2240 : 2002 : REV A Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 93 : 1997 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D 823 : 2018 : R2022 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D 2369 : 1987 Standard Test Method for Volatile Content of Coatings
ASTM D 1640/D1640M : 2014 : R2022 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings
ASTM D 228/D228M : 2019 : REV A Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
ASTM D 1922 : 2006 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 816 : 2006 : R2016 Standard Test Methods for Rubber Cements
ASTM D 2369 : 2001 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM D 2290 : 2008 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
ASTM D 1709 : 2015 : REV A Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 1004 : 2021 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D 3111 : 2019 Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test
ASTM D 1922 : 2009 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
ASTM D 7105 : 2006 : R2013 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
ASTM D 1042 : 2012 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
ASTM D 1149 : 1999 Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber
ASTM D 2369 : 1992 Standard Test Method for Volatile Content of Coatings
ASTM D 1709 : 2016 : REV A Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D 3278 : 1996 : R2011 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020)
ASTM D 93 : 2018 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D 6382/D6382M : 1999 : R2017 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM D 5635/D5635M : 2018 : R2022 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
ASTM D 638 : 2022 Standard Test Method for Tensile Properties of Plastics
ASTM D 2136 : 2019 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D 2137 : 2011 Standard Test Methods for Rubber Property<char: emdash>Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM E 162 : 2022 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

View more information
$122.77
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more